Skip to content

Quickstart

Jump to bottom
Mikayla edited this page Aug 25, 2023 · 21 revisions

Quick Setup Guide (Setup TL;DR)

Was the setup too long and you didn't want to read it?

  1. The installer can be downloaded using wget https://raw.githubusercontent.com/MikaylaFischler/cc-mek-scada/main/ccmsi.lua from GitHub or download from pastebin with pastebin get sqUN6VUb ccmsi.lua. The installer help ccmsi help should give you the information you need to install the applications.

  2. The config files are intended to be self-documenting, so you can likely figure them out. You still should probably check out the section on the RTU config though.

  3. Remember you can only have one coordinator and one supervisor in any given facility system, with a maximum of 4 reactor units (each with no more than 2 boilers and no more than 3 turbines).

I've made a basic setup/usage guide video for the beta software, which can be found here:

Beta Setup Guide

Most errors in configs and setup will be reported on their respective devices, but not all. If you're having issues, check out the full setup guide and jump to the areas you think might help, ask for help on the GitHub discussions, or ask on the Discord.

GLHF

If you need help beyond this wiki, open a support discussion or ask on Discord! If you prefer videos, they can be found on my YouTube channel.

Homepage

  1. User Manual
    1. System Setup Guide
      1. Device Layout
        1. Coordinator Displays
      2. Connecting to Mekanism Machines
      3. Application Installation
        1. Space Requirements
        2. Installation
        3. Updating
        4. Uninstalling
      4. Setup & Configuration
        1. Network Channels
        2. Supervisor Setup
        3. Coordinator Setup
        4. Reactor PLC Setup
        5. RTU Gateway Setup
      5. Initial Startup
    2. Configurator Tools
      1. Supervisor Configurator
      2. Coordinator Configurator
      3. Reactor PLC Configurator
      4. RTU Gateway Configurator
    3. Redstone Waste Setup Guide
    4. TL;DR Quickstart
    5. FAQ and Common Problems
    6. Colorblind Accessibility
    7. Annunciator Panels
    8. Alarms
    9. System Views
      1. Main View Screen
      2. Valve & Flow Screen
      3. Unit View Screens
    10. Operating Procedure
    11. Status Messages
    12. Glossary
  2. Computer Applications
    1. Reactor PLC
    2. RTU Gateway
    3. Supervisory Computer
    4. Coordinator Computer
    5. Pocket
  3. Notable System Components
    1. Threaded Reactor PLC & RTU Gateway
    2. Project File Layout/Overview
    3. PPM - Protected Peripherals Manager
    4. RSIO - Redstone I/O
    5. Utility Classes
    6. Networking
  4. Notes
    1. Known Issues
    2. Process Closed Loop Controller
    3. Project Files and Layout
    4. Alternative Installation Strategies
  5. Investigations
    1. Startup Rate High
    2. Reactor Temperature Calculation
  6. References & Resources
    1. CC: Tweaked Character Set
    2. Mekanism API Notes
    3. Design & Regulatory References
  7. Legacy
    1. coord.settings File
    2. config.lua Files
      1. Supervisor config.lua
      2. Coordinator config.lua
      3. Reactor PLC config.lua
      4. RTU Gateway config.lua
Clone this wiki locally