Based Board Firmware In Rust

This is a working blinky example for the BasedBoard project. Its fully written in Rust and uses typical embedded components from the Rust embedded world. In order to compile it you just need to have rust installed and then run cargo build in the repository. It will prompt you to install needed targets for cross compilation. You can also flash it by running cargo embed (install cargo-embed first).

Info

As of now this repository and its configuration is a proof of concept. ' Both debugging using VSCode (openocd and the cortex-debug extension under the hood) and cmd openocd and remote gdb.

Command line: First open a connection to the board:

openocd -f interface/stlink.cfg -f target/stm32f4x.cfg

Then in another terminal connect to it (the gdb debugger might have a different name on your OS like gdb or gdb-embedded etc):

arm-none-eabi-gdb -q -ex "target remote :3333" target/thumbv7em-none-eabihf/debug/based-board-firmware-rust