ARP Net Speed Controller

Dependencies

• ncurses
• libpcap

So before you compile the source code, you should install them.

In ubuntu, you can install the dependencies by the following commands:

sudo apt install libncurses-dev
sudo apt-get install libpcap-dev

Get & Compile

git clone https://github.com/RileyWen/arp-net-speed-controller.git
cd arp-net-speed-controller
cmake -DCMAKE_BUILD_TYPE=Debug -G "CodeBlocks - Unix Makefiles" .
make -j 4

---

Before Running

• Since TCP Segmentation has yet to implement, you should use ethtool to turn off all receive offload on the network interface. e.g sudo ethtool -K wlan0 gro off
• Since the forwarding part is based on libpcap, you should turn off system kernel forwarding. e.g. sudo sysctl -w net.ipv4.ip_forward=0

---

How to Use

-T --target-ip=<target IP>             'Target' is the device you want to attack
-t --target-mac=<target MAC>
-G --gateway-ip=<gateway IP>           'Gateway' is often the router in your subnet
-g --gateway-mac=<gateway MAC>
-S --self-ip=<IP of this device>       'Self' means the device running this program
-s --self-mac=<MAC of this device>
-h --help                              Print this help info

---

Running Example