The repository for firmware of SimGETRO designed based on the ch32v203 chip.
Currently, you need to install Risc-GCC (WCH) in order to compile the firmware correctly. Also, you might need VS Code & Embedded IDE plugin as your IDE progrom. Use WCHISPtool to burn firmware to your device.
要编译源代码，请在您的 VSCode 中安装 EIDE 作为开发编译环境，并使用 EIDE 安装 RISCV_GCC 和 OPENOCD_WCH 8.2.0 ，如果您使用其他版本的 openocd ，请修改 EIDE项目 中的 构建配置->右键菜单 修改您的工具链路径。请注意，更改工具链版本可能会造成无法编译。
要烧入固件，请使用 WCHISPTools，并使用 USB 方式烧入。
You could refer to the following table to find what you're looking for.
| Folder | Content |
|---|---|
| src | Firmware source code |
You could find the schematic information from files under the directory Schematic Design. Please add new features to SimGEKI as you prefer! In addition, what you write will have a chance to be pushed to SimGEKI around the world.
Will upload later
You must not use any name, including product name and trademark, that is associated to SimPad, SimDevices, SimGEKI, SimGETRO for promotional or other purposes. Please be kindly advised.
This project referenced these projects
- ONGEEKi Firmware - GEEKiDoS
- Arduino-Aime-Reader - Sucareto