Zybo Z7-10 Test for ECE 410 Lab Kit

Zybo Z7-10 Test for ECE 410 Lab Kit is created to run and ensure that all ports / PMODs used from ECE 410 is functioning correctly.

Requirements

• Vivado 2020.1
• Zybo Z7-10 Board
• Segment Display PMOD
• USB Cable connector to connect the board to the computer running this program

Preparing

1. Connect the Zybo Board with computer and / or power.
2. Connect the PMOD Segment Display in the port shown as below:
3. Power on the Board
4. Open the project file
5. Generate Bitstream and Program the Board
6. You are ready for Testing!

Test

• The LEDs (M14, M15, G14, D18) respond to the switches (G15, P15, W13, T16) just below them.
• The RGB LEDs (V16, F17, M17) respond to 3 of the buttons (P16, K19, Y16).
• The last Button (K18) turns all bits in both of the segment display on.
• The PMOD Segment Display continuously runs in the background and goes through each bit in the display.

Recommended Testing Method

Here is a quick 15-second video demonstrating one of the ways the board can be tested.

Ports and PMODs Used in ECE 410

• Switches:

  • G15, P15, W13, T16

• Buttons:

  • K18, P16, K19, Y16,

• LEDs:

  • M14, M15, G14, D18

• RGB LED 6s:

  • V16, F17, M17

• PMOD Segment Display:

  • JC: V15, W15, T11, T10,
  • JD: T14, T15, P14, R14