config.inc.php

<?php
/**
 * TestLink Open Source Project - http://testlink.sourceforge.net/
 * This script is distributed under the GNU General Public License 2 or later.
 *
 * Constants and configuration parameters used throughout TestLink
 *
 * There are included extra files:
 * - your customized settings - custom_config.inc.php
 * - DB access - config_db.inc.php
 * - constants - const.inc.php
 * - basic checking - configCheck.php
 *
 * IMPORTANT:
 * To adapt values to your needs DO NOT EDIT THIS FILE but use custom_config.inc.php and
 * replace values of TestLink configuration variables.
 * It saves your changes for the next upgrade in one extra file.
 *
 * @filesource  config.inc.php
 * @package     TestLink
 * @copyright   2005-2023, TestLink community
 * @link        http://www.testlink.org
 *
 *
 **/

// ----------------------------------------------------------------------------
/* [INITIALIZATION] - DO NOT CHANGE THE SECTION */

/** @global array Global configuration class */
$tlCfg = new stdClass();
$tlCfg->api = new stdClass();
$tlCfg->cookie = new stdClass();
$tlCfg->document_generator = new stdClass();

$tlCfg->spec_cfg = new stdClass();

$tlCfg->exec_cfg = new stdClass();
$tlCfg->exec_cfg->view_mode = new stdClass();
$tlCfg->exec_cfg->exec_mode = new stdClass();


$tlCfg->UDFStripHTMLTags = true;

// allow to define additional execution types other than 
// defined in testcase.class.php
// array(code => lblkey)
// code int value > latest standard execution code defined.
// lblkey => key to be used on lang_get() call.
// 
$tlCfg->custom_execution_types = null;

$tlCfg->gui = new stdClass();
$tlCfg->gui->custom_fields = new stdClass();
$tlCfg->testcase_cfg = new stdClass();
$tlCfg->req_cfg = new stdClass();
$tlCfg->validation_cfg = new stdClass();
$tlCfg->custom_fields = new stdClass();
$tlCfg->req_spec_cfg = new stdClass();
$tlCfg->diffEngine = new stdClass();
$tlCfg->tplanDesign = new stdClass();

$tlCfg->notifications = new stdClass();
$tlCfg->proxy = new stdClass();

$tlCfg->reqTCLinks = new stdClass();


$tlCfg->keywords = new stdClass();

$tlCfg->keywords->annotations = [
  "@TestCaseSpecDisplay:"
];


$tlCfg->keywords->onDeleteCheckFrozenTCVersions = TRUE;
$tlCfg->keywords->onDeleteCheckExecutedTCVersions = TRUE;

// main key testproject PREFIX
// element array 
// 'addTCLinkIntoITS' true => add note to Issue Tracker to issue with
// ISSUE ID similar to the KEYWORD (see kwPrefix below) 
//                     
// 'kwPrefix' to remove from keyword to create the ISSUE ID
//
$tlCfg->keywords->byTestProject = array();

$tlCfg->keywords->headsUpTSuiteOnExec = 'CMD_OPEN_ON_EXEC';

$tlCfg->accessWithoutLogin = array();


$tlCfg->platforms = new stdClass();
$tlCfg->platforms->allowedOnAssign = [
  'enable_on_design' => false, 
  'enable_on_execution' => true,
  'is_open' => true
];



/** @uses database access definition (generated automatically by TL installer) */ 
@include_once('config_db.inc.php');
if( !defined('DB_TABLE_PREFIX') ) {
    define('DB_TABLE_PREFIX','' );
}

/** The root dir for the testlink installation with trailing slash */
define('TL_ABS_PATH', dirname(__FILE__) . DIRECTORY_SEPARATOR);

/** Just for documentation */
$tlCfg->testlinkdotorg = 'http://www.testlink.org';

/** GUI themes (base for CSS and images)- modify if you create own one */
$tlCfg->theme_dir = 'gui/themes/default/';

/** Dir for compiled templates */
$tlCfg->temp_dir = TL_ABS_PATH . 'gui' . DIRECTORY_SEPARATOR . 
                   'templates_c' . DIRECTORY_SEPARATOR;
if (($tpltmp = getenv('TESTLINK_TEMPLATES_C'))) {
  $tlCfg->temp_dir = trim($tpltmp);
}

/** default filenames of CSS files of current GUI theme */
define('TL_CSS_MAIN', 'testlink.css');
define('TL_CSS_PRINT', 'tl_print.css');
define('TL_CSS_DOCUMENTS', 'tl_documents.css');

define('TL_THEME_BASE_DIR', $tlCfg->theme_dir);
define('TL_THEME_IMG_DIR', $tlCfg->theme_dir . 'images/');
define('TL_THEME_CSS_DIR', $tlCfg->theme_dir . 'css/');
define('TL_TESTLINK_CSS', TL_THEME_CSS_DIR . TL_CSS_MAIN);
define('TL_PRINT_CSS', TL_THEME_CSS_DIR . TL_CSS_PRINT);

// name of your custom.css, place it in same folder that standard TL css
// null or '' => do not use
$tlCfg->custom_css = null;


/** Include constants and magic numbers (users should not change it)*/
require_once(TL_ABS_PATH . 'cfg' . DIRECTORY_SEPARATOR . 'const.inc.php');


// ----------------------------------------------------------------------------
/** @var string used to have (when needed) a possibility to identify different TL instances
    @since 1.9.4 used on mail subject when mail logger is used
 */
$tlCfg->instance_name = 'Main TestLink Instance';

// do not use blanks or special characters, use a short string
$tlCfg->instance_id = 'TLM';

$tlCfg->gui->ux = 'tl-classic';

/**
 * Copied from MantisBT
 * 
 * Prefix for all TestLink cookies
 * This should be an identifier which does not include spaces or periods,
 * and should be unique per TestLink installation, especially if
 * $tlCfg->cookie_path is not restricting the cookies' scope to the actual
 * TestLink directory.
 * @see $tlCfg->cookie->path
 * @global string $tlCfg->cookie->prefix
 */
$tlCfg->cookie->prefix = 'TESTLINK1920';

/**
 * @link http://php.net/function.setcookie
 *
 */
$tlCfg->cookie->expire = (time()+60*60*24*30); // 30 days;
$tlCfg->cookie->domain = '';
$tlCfg->cookie->secure = false;
$tlCfg->cookie->httponly = false;

$tlCfg->cookie->testProjectMemory = $tlCfg->cookie->prefix . 
                                    '_PROJ_ID_USER_ID_';

/**
 * Copied from MantisBT
 *
 * Specifies the path under which a cookie is visible
 * All scripts in this directory and its sub-directories will be able
 * to access TestLink cookies.
 * It is recommended to set this to the actual TestLink path.
 * @link http://php.net/function.setcookie
 * @global string $tlCfg->cookie->path
 */
 $tlCfg->cookie->path = '/';


/* [ROLE INHERITANCE] */
/**
 * possible values
 *
 * 'testproject'
 * 'global'
 *
 * 'testproject' 
 * till a role is specifically assigned to test plan, test plan role 
 * will be inherited from test project role.
 *
 * IMPORTANT NOTICE
 * test project role can be specifically assigned or inherited from
 * user's global role.
 *
 * if test project specifically assigned role changes, and test plan role was inherited, then it will also changes, due to inheritance.
 *
 *
 * 'global'
 * till a role is specifically assigned to test plan, test plan role 
 * will be inherited from user's global role, and NOT from test project 
 * specifically assigned role.
 *
 * if test project specifically assigned role changes, will not be changed.
 *
 */
 $tlCfg->testplan_role_inheritance_mode = 'testproject';


/* [LOCALIZATION] */

/** @var string Default localization for users */
// The value must be available in $$tlCfg->locales (see cfg/const.inc.php).
// Note: An attempt will be done to establish the default locale
// automatically using $_SERVER['HTTP_ACCEPT_LANGUAGE']
$tlCfg->default_language = 'en_GB';

/**
 * @var string Charset 'UTF-8' is only officially supported charset (Require
 * MySQL version >= 4.1) 'ISO-8859-1' or another Charset could be set for
 * backward compatability by experienced users. However we have not resources
 * to support such patches.
 **/
$tlCfg->charset = 'UTF-8';

/**
 * @var string characters used to surround a description in the user interface
 * (for example role)
 **/
$tlCfg->gui_separator_open =  '[';
$tlCfg->gui_separator_close = ']';
$tlCfg->gui_room = '[ %s ]';

/** @var string Title separators are used when componing an title using several strings */
$tlCfg->gui_title_separator_1 = ' : '; // object : name (Test Specification : My best product)
$tlCfg->gui_title_separator_2 = ' - '; // parent - child

/**
 * @var string delimiter used to create DOC ID in this way:
 * <test_project_Prefix> . g_testcase_cfg->glue_character . <doc_id>
 * Could not be empty
 */
$tlCfg->testcase_cfg->glue_character = '-';



$tlCfg->testcase_cfg->import = new stdClass();
$tlCfg->testcase_cfg->import->wordwrap = new stdClass();

/* 0 => do not apply wordwrap() */
$tlCfg->testcase_cfg->import->wordwrap->summary = 0;
$tlCfg->testcase_cfg->import->wordwrap->preconditions = 0;
$tlCfg->testcase_cfg->import->wordwrap->actions = 0;
$tlCfg->testcase_cfg->import->wordwrap->expected_results = 0;


/**
 * fonts set used to draw charts
 **/
$tlCfg->charts_font_path = TL_ABS_PATH . "third_party/pchart/Fonts/tahoma.ttf";
/**
 * font size used to draw charts
 **/
$tlCfg->charts_font_size = 8;


// ----------------------------------------------------------------------------
/* [SERVER ENVIRONMENT] */


/**
 * TICKET 4969: Add Setting to Force HTTPS
 */
$tlCfg->force_https = false;


/**
 * @var integer Set the session timeout for inactivity [minutes].
 * Default high value disables this feature.
 */
$tlCfg->sessionInactivityTimeout = 9900;

/**
 * Set the session timeout value (in minutes).
 * This will prevent sessions timing out after very short periods of time
 * Warning: your server could block this settings
 **/
//ini_set('session.cache_expire',900);

/**
 * Set the session garbage collection timeout value (in seconds)
 * The default session garbage collection in php is set to 1440 seconds (24 minutes)
 * If you want sessions to last longer this must be set to a higher value.
 * You may need to set this in your global php.ini if the settings don't take effect.
 */
//ini_set('session.gc_maxlifetime', 60*90);

$tlCfg->notifications->userSignUp = new stdClass();
$tlCfg->notifications->userSignUp->enabled = TRUE;  // @see notifyGlobalAdmins()
$tlCfg->notifications->userSignUp->to = new stdClass();
$tlCfg->notifications->userSignUp->to->roles = array(TL_ROLES_ADMIN);
$tlCfg->notifications->userSignUp->to->users = null; // i.e. array('login01','login02');

// ----------------------------------------------------------------------------
/* [LOGGING] */

/** Error reporting - do we want php errors to show up for users */
/** configure on custom_config.inc.php */
/** error_reporting(E_ALL & ~E_NOTICE & ~E_DEPRECATED & ~E_STRICT & ~E_WARNING); */
/** error_reporting(E_ALL & ~E_NOTICE & ~E_WARNING); */
error_reporting(E_ALL);

/** @var string Default level of logging (NONE, ERROR, INFO, DEBUG, EXTENDED) 
 *  is not used by tlLogger, we need to change this in future.
 */
$tlCfg->log_level = 'ERROR';

/** @var boolean show smarty debug window */
$tlCfg->smarty_debug = false;

/** 
 *  @var string Path to store logs - 
 *  for security reasons (see http://itsecuritysolutions.org/2012-08-13-TestLink-1.9.3-multiple-vulnerabilities/)
 *  put it out of reach via web or configure access denied.
 */
$tlCfg->log_path = '/var/testlink/logs/'; /* unix example */
if (($lp = getenv('TESTLINK_LOG_PATH'))) {
  $tlCfg->log_path = trim($lp);
}

/**
 * @var string How to warning user when security weak points exists.
 *
 * 'SCREEN': messages will displayed on login screen, and tl desktop
 * 'FILE': a file with a list is created but users are not notified via GUI
 *         user will receive a message on screen. (default)
 * 'SILENT': same that FILE, but user will not receive message on screen.
 */
$tlCfg->config_check_warning_mode = 'FILE';

/**
 * ONCE_FOR_SESSION
 * ALWAYS
 */
$tlCfg->config_check_warning_frequence = 'ONCE_FOR_SESSION';

/**
 *
 */ 
$tlCfg->userDocOnDesktop = OFF;


/**
 * Configure if individual logging data stores are enabled of disabled
 * Possibile values to identify loggers: 'db','file'
 * $g_loggerCfg=null; all loggers enabled 
 * $g_loggerCfg['db']['enable']=true/false;
 * $g_loggerCfg['file']['enable']=true/false;
 * $g_loggerCfg['mail']['enable']=true/false;
 */
$g_loggerCfg = array('mail' => array('enable' => false));

/**  @var integer All events older this value [days] are removed from the db, during login */
$g_removeEventsOlderThan = 30;
                            

/**  @var map keys: 'all' + values present on proprety of logger class $loggerTypeDomain
 *                  values can be only these defined on logger.class.php 
 *   @since 1.9.4                                  
 *   example array('all' => array('INFO','AUDIT'),
 *                 'mail' =>  array('ERROR'))
 *
 *   $tlCfg->loggerFilter = array('db' => array('DEBUG','AUDIT','WARNING','ERROR'),
 *                                'file' => array('NONE'));
 *
 */                            
$tlCfg->loggerFilter = null; // default defined on logger.class.php ;                            

// ----------------------------------------------------------------------------
/* [SMTP] */

/**
 * @var string SMTP server name or IP address ("localhost" should work in the most cases)
 * Configure using custom_config.inc.php
 * @uses lib/functions/email_api.php
 */
$g_smtp_host        = '[smtp_host_not_configured]';  # SMTP server MUST BE configured

# Configure using custom_config.inc.php
$g_tl_admin_email     = '[testlink_sysadmin_email_not_configured]'; # for problem/error notification
$g_from_email         = '[from_email_not_configured]';  # email sender
$g_return_path_email  = '[return_path_email_not_configured]';

/**
 * Email notification priority (low by default)
 * Urgent = 1, Not Urgent = 5, Disable = 0
 **/
$g_mail_priority = 5;

/**
 * Taken from mantis for phpmailer config
 * select the method to mail by:
 * PHPMAILER_METHOD_MAIL - mail()
 * PHPMAILER_METHOD_SENDMAIL - sendmail
 * PHPMAILER_METHOD_SMTP - SMTP
 */
$g_phpMailer_method = PHPMAILER_METHOD_SMTP;

/** Configure only if SMTP server requires authentication */
$g_smtp_username    = '';  # user
$g_smtp_password    = '';  # password

/**
 * This control the connection mode to SMTP server. 
 * Can be '', 'ssl','tls'
 * @global string $g_smtp_connection_mode
 */
$g_smtp_connection_mode = '';

/**
 * The smtp port to use.  The typical SMTP ports are 25 and 587.  The port to use
 * will depend on the SMTP server configuration and hence others may be used.
 * @global int $g_smtp_port
 */
$g_smtp_port = 25;                        


/**
 * @see https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting
 *      Opportunistic TLS
 */
$g_SMTPAutoTLS = false;

// ----------------------------------------------------------------------------
/* [User Authentication] */

/**
 * Login authentication method:
 *  'MD5' => use password stored on db => will be deprecated and DB used.
 *  'DB'  => Same as MD5 use password stored on db
 *  'LDAP' => use password from LDAP Server
 */
$tlCfg->authentication['domain'] = array('DB' => array('description' => 'DB', 'allowPasswordManagement' => true) ,
                     'LDAP' => array('description' => 'LDAP', 'allowPasswordManagement' => false) );

/* Default Authentication method */
$tlCfg->authentication['method'] = 'DB';

// Applies only if authentication method is DB.
// Used when:
// 1. user sign up
//
// null => only check password IS NOT EMPTY
//
// $tlCfg->passwordChecks = array('minlen' => 8,'maxlen' => 20,'number' => true,'letter' => true,
//                                'capital' => true, 'symbol' => true);
$tlCfg->passwordChecks = null;

// Applies ONLY to the HTML input.
// If auth method is DB, password will be stored as MD5 HASH that requires 32 chars (128 bits)
$tlCfg->loginPagePasswordMaxLenght = 40;

/**
 * Standard logout url, used also when SSO is used and hint to skip SSO is used.
 * '' => use standard TestLink page
 */
$tlCfg->logoutUrl = '';

// users that will not allow expiration date management on GUI
$tlCfg->noExpDateUsers = array('admin');


/**
 * OAUTH auth
 * Configure this on custom_config.inc.php
 */

$tlCfg->OAuthServers = array();

// Google
// see cfg/oauth_samples/oauth.google.inc.php

// Github
// see cfg/oauth_samples/oauth.github.inc.php

// Gitlab
// see cfg/oauth_samples/oauth.gitlab.inc.php

// Microsoft
// see cfg/oauth_samples/oauth.microsoft.inc.php

// Azure AD 
// see cfg/oauth_samples/oauth.azuread.inc.php

/**
 * Single Sign On authentication
 *
 * SSO_method: CLIENT_CERTIFICATE, tested with Apache Webserver
 * SSP_method: WEBSERVER_VAR, tested with Apache and Shibboleth Service Provider.
 */
$tlCfg->authentication['SSO_enabled'] = false; 
$tlCfg->authentication['SSO_logout_destination'] = 'YOUR LOGOUT DESTINATION';

// Tested with Apache Webserver
//$tlCfg->authentication['SSO_method'] = 'CLIENT_CERTIFICATE';
//$tlCfg->authentication['SSO_uid_field'] = 'SSL_CLIENT_S_DN_Email';

// Tested with Apache and Shibboleth Service Provider 
//$tlCfg->authentication['SSO_method'] = 'WEBSERVER_VAR';
//$tlCfg->authentication['SSO_uid_field'] = 'REMOTE_USER';
//$tlCfg->authentication['SSO_user_target_dbfield'] = 'email';


/**
 * LDAP authentication credentials, Multiple LDAP Servers can be used. 
 * User will be authenticaded against each server (one after other using array index order)
 * till authentication succeed or all servers have been used.
 */
$tlCfg->authentication['ldap'] = array();
$tlCfg->authentication['ldap'][1]['ldap_server'] = 'localhost';
$tlCfg->authentication['ldap'][1]['ldap_port'] = '389';
$tlCfg->authentication['ldap'][1]['ldap_version'] = '3'; // could be '2' in some cases
$tlCfg->authentication['ldap'][1]['ldap_root_dn'] = 'dc=mycompany,dc=com';
$tlCfg->authentication['ldap'][1]['ldap_bind_dn'] = ''; // Left empty for anonymous LDAP binding
$tlCfg->authentication['ldap'][1]['ldap_bind_passwd'] = ''; // Left empty for anonymous LDAP binding
$tlCfg->authentication['ldap'][1]['ldap_tls'] = false; // true -> use tls

// Following configuration parameters are used to build 
// ldap filter and ldap attributes used by ldap_search()
//
// filter => "(&$t_ldap_organization($t_ldap_uid_field=$t_username))";
// attributess => array( $t_ldap_uid_field, 'dn' );
// 
// This can be used to manage situation like explained on post on forum:
// ActiveDirectory + users in AD group
// 
$tlCfg->authentication['ldap'][1]['ldap_organization'] = ''; // e.g. '(organizationname=*Traffic)'
$tlCfg->authentication['ldap'][1]['ldap_uid_field'] = 'uid'; // Use 'sAMAccountName' for Active Directory

// Configure following fields in custom_config.inc.php according your configuration
$tlCfg->authentication['ldap'][1]['ldap_email_field'] = 'mail';
$tlCfg->authentication['ldap'][1]['ldap_firstname_field'] = 'givenname';
$tlCfg->authentication['ldap'][1]['ldap_surname_field'] = 'sn';


// Follows Mantisbt idea.
// True if user does not exist on DB, but can be get from LDAP, 
// the user will be created AUTOMATICALLY with default user role.
// Create user with following data from LDAP
// mail
// name
// surname
$tlCfg->authentication['ldap_automatic_user_creation'] = false;


/** Enable/disable Users to create accounts on login page */
$tlCfg->user_self_signup = TRUE;

/** What happens when Administrator push the Reset Password Button 
  'send_password_by_mail'
  'display_on_screen'
*/
$tlCfg->password_reset_send_method = 'send_password_by_mail';

/** 
 * Validating new user login names
 * Taken mantisbt version 1.2.5 - www.mantisbt.org and adapted
 *
 * The regular expression to use when validating new user login names
 * The default regular expression allows a-z, A-Z, 0-9, +, -, dot, @ and underscore.   
 * For testing regular expressions, use http://rubular.com/.
 * For regular expression to englihs, use http://xenon.stanford.edu/~xusch/regexp/analyzer.html
 */
$tlCfg->validation_cfg->user_login_valid_regex='/^([a-z\d\-.+_@]+(@[a-z\d\-.]+\.[a-z]{2,4})?)$/i';

/**
 * Validating user email addresses
 * Example of other possibilities:
 * <code>
 * $regex = "/^[a-z0-9!#$%&'*+\/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+\/=?^_`{|}~-]+)*" .
 *     "@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])?$/i";
 * $regex = "/^([\w]+)(.[\w]+)*@([\w-]+\.){1,5}([A-Za-z]){2,4}$/";
 * </code>
 **/
// 
// This expression does not allow Top Level Domian (last part of domain name) longer than 4
// If you need to change this
// Configure this on custom_config.inc.php
$tlCfg->validation_cfg->user_email_valid_regex_js =  "/^(\w+)([-+.][\w]+)*@(\w[-\w]*\.){1,5}([A-Za-z]){2,4}$/";
$tlCfg->validation_cfg->user_email_valid_regex_php = "/^([\w]+)(.[\w]+)*@([\w-]+\.){1,5}([A-Za-z]){2,4}$/U";


// --------------------------------------------------------------------------------------
/* [API] */

/** XML-RPC API availability - do less than promised ;) 
    FALSE => user are not able to generate and set his/her API key.
    XML-RPC server do not check this config in order to answer or not a call.
 */

$tlCfg->api->enabled = TRUE;

// used to display API ID info in the *View pages
$tlCfg->api->id_format = "[ID: %s ]";


// ---------------------------------------------------------------------------------
/* [GUI LAYOUT] */

/** Company logo (used by navigation bar and login page page) */
$tlCfg->logo_login = 'tl-logo-transparent-25.png';
$tlCfg->logo_navbar = 'tl-logo-transparent-12.5.png';

/** Height of the navbar always displayed  */
$tlCfg->navbar_height = 70;

/** Login page could show an informational text */
$tlCfg->login_info = ''; // Empty by default



/** 
 * controls if pagination (via Javascript) will be enabled
 */
$tlCfg->gui->projectView = new stdClass();
$tlCfg->gui->projectView->pagination = new stdClass();
$tlCfg->gui->projectView->pagination->enabled = true;
$tlCfg->gui->projectView->pagination->length = '[20, 40, 60, -1], [20, 40, 60, "All"]';

$tlCfg->gui->usersAssign = new stdClass();
$tlCfg->gui->usersAssign->pagination = new stdClass();
$tlCfg->gui->usersAssign->pagination->enabled = true;
$tlCfg->gui->usersAssign->pagination->length = '[20, 40, 60, -1], [20, 40, 60, "All"]';

$tlCfg->gui->planView = new stdClass();
$tlCfg->gui->planView->pagination = new stdClass();
$tlCfg->gui->planView->pagination->enabled = true;
$tlCfg->gui->planView->pagination->length = '[20, 40, 60, -1], [20, 40, 60, "All"]';
$tlCfg->gui->planView->itemQtyForTopButton = 10;

$tlCfg->gui->buildView = new stdClass();
$tlCfg->gui->buildView->pagination = new stdClass();
$tlCfg->gui->buildView->pagination->enabled = true;
$tlCfg->gui->buildView->pagination->length = '[20, 40, 60, -1], [20, 40, 60, "All"]';
$tlCfg->gui->buildView->itemQtyForTopButton = 10;

$tlCfg->gui->keywordsView = new stdClass();
$tlCfg->gui->keywordsView->pagination = new stdClass();
$tlCfg->gui->keywordsView->pagination->enabled = true;
$tlCfg->gui->keywordsView->pagination->length = '[40, 60, 80, -1], [40, 60, 80, "All"]';
$tlCfg->gui->keywordsView->itemQtyForTopButton = 10;



/** 
 * controls if operation area (buttons) starts open ('' or 'inline') or closed ('none') on:
 * - test suite management
 * - test case management
 * - req. spec management
 * - req. management
 */
$tlCfg->gui->op_area_display = new stdClass();

// test_spec_container => test project, test suite
$tlCfg->gui->op_area_display->test_spec_container = 'none'; // ''
$tlCfg->gui->op_area_display->test_case = 'none'; // 'inline'
$tlCfg->gui->op_area_display->req_spec_container = 'none'; // 'inline'
$tlCfg->gui->op_area_display->req = 'none'; // 'inline'



/**
 * @var string Availability of Test Project specific background colour
 * 'background'  -> standard behaviour for 1.6.x you can have a different
 *                  background colour for every test project.
 * 'none'        -> new behaviour no background color change
 */
$tlCfg->gui->testproject_coloring = 'none'; // I'm sorry default is not coloring using coloring is a pain
                                            // and useless
/** @TODO havlatm4francisco Ok, then merge these two attributes into one */
/** default background color */
$tlCfg->gui->background_color = '#9BD';

// ENABLED: on features that assign user role to test projects and test plan, colour user name
//          according GLOBAL role
// DISABLED: do not color [STANDARD BEHAVIOUR]
$tlCfg->gui->usersAssignGlobalRoleColoring = DISABLED;


// Enable/disable rounded corners via javascript
$tlCfg->gui->round_corners = new stdClass();
$tlCfg->gui->round_corners->exec_history = ENABLED;
$tlCfg->gui->round_corners->tc_title = ENABLED;
$tlCfg->gui->round_corners->tc_spec = ENABLED;

/**
 * Display name definition (used to build a human readable display name for users)
 * Example of values:
 *    '%first% %last%'          -> John Cook
 *    '%last%, %first%'          -> Cook John
 *    '%first% %last% %login%'    -> John Cook [ux555]
 **/
$tlCfg->username_format = '%login%';

/** Configure the frame frmWorkArea navigator width */
$tlCfg->frame_workarea_default_width = "30%";

/** true => icon edit will be added into <a href> as indication an edit features */
$tlCfg->gui->show_icon_edit = false;

/**
 * ''       => test project name
 * 'prefix' => prefix : test project name
 *
 * ATTENTION : * is used to indicate test project is INACTIVE
 *             see also $tlCfg->gui->tprojects_combo_order_by
 */
$tlCfg->gui->tprojects_combo_format = 'prefix';


/**
 * Order to use when building a testproject combobox (value must be SQL compliant)
 * For example:
 *    'ORDER BY name'
 *    'ORDER_BY nodes_hierarchy.id DESC' -> similar effect to order last created firts
 **/
// $tlCfg->gui->tprojects_combo_order_by = 'ORDER BY nodes_hierarchy.id DESC';
$tlCfg->gui->tprojects_combo_order_by = 'ORDER BY TPROJ.prefix ASC';



/** Configure the input size of test case search by id on navigation bar.
 *  This value will be added to the length of the prefix to dynamically set input size.
 *  Example: prefix is "projectA-" -> length of prefix is 9
 *  Now the here defined value (default: 6) will be added to the prefix length
 *  -> Input field will have an input size of 15
 **/
$tlCfg->gui->dynamic_quick_tcase_search_input_size = 6;

// used to round percentages on metricsDashboard.php
$tlCfg->dashboard_precision = 2;

/**
 * Choose what kind of webeditor you want to use in every TL area. This configuration
 * will be used if no element with search key (area) is found on this structure.
 * Every element is a mp with this configuration keys:
 *
 * 'type':
 *        'ckeditor'
 *        'tinymce'    ==> will be deprecated in future versions
 *        'none' -> use plain text area input field
 * 'toolbar': only applicable for type = 'fckeditor', 'ckeditor'
 *      name of ToolbarSet  (See: http://docs.fckeditor.net/ for more information about ToolbarSets)
 *      TestLink stores own definitions in <testlink_dir>/cfg/tl_ckeditor_config.js
 *
 *
 * The next keys/areas are supported:
 *    'all' (default setting),
 *    'design', 'steps_design', 'testplan', 'build', 'testproject', 'role', 'requirement', 'requirement_spec'.
 *
 * Examples:
 * <code>
 * // Copy this to custom_config.inc.php if you want use 'tinymce' as default.
 * $tlCfg->gui->text_editor['all'] = array( 'type' => 'tinymce');
 * // Copy this to custom_config.inc.php if you want use 'nome' as default.
 * $tlCfg->gui->text_editor['all'] = array( 'type' => 'none');
 * //This configuration is useful only if default type is set to 'fckeditor'
 * $tlCfg->gui->text_editor['design'] = array('toolbar' => 'tl_mini');
 *
 * $tlCfg->gui->text_editor['testplan'] = array( 'type' => 'none');
 * $tlCfg->gui->text_editor['build'] = array( 'type' => 'fckeditor','toolbar' => 'tl_mini');
 * $tlCfg->gui->text_editor['testproject'] = array( 'type' => 'tinymce');
 * $tlCfg->gui->text_editor['role'] = array( 'type' => 'tinymce');
 * $tlCfg->gui->text_editor['requirement'] = array( 'type' => 'none');
 * $tlCfg->gui->text_editor['requirement_spec'] = array( 'type' => 'none');
 * </code>
 *
 * Hint: After doing configuration changes, clean you Browser's cookies and cache
 */
/*
$tlCfg->gui->text_editor = array();
$tlCfg->gui->text_editor['all'] = array('type' => 'fckeditor',
                                      'toolbar' => 'tl_default',
                                      'configFile' => 'cfg/tl_ckeditor_config.js',);
$tlCfg->gui->text_editor['execution'] = array( 'type' => 'none');
*/

$tlCfg->gui->text_editor = array();
$tlCfg->gui->text_editor['all'] = ['type' => 'ckeditor',
	                               'toolbar' => 'Testlink',
                                   'configFile' => 'cfg/tl_ckeditor_config.js',
                                   'height' => 150];


// mini toolbar for test case steps edit
$tlCfg->gui->text_editor['steps_design'] = ['type' => 'ckeditor',
	                                        'toolbar' => 'TestlinkMini',
                                            'configFile' => 'cfg/tl_ckeditor_config.js',
                                            'height' => 100];

// 
$tlCfg->gui->text_editor['preconditions'] = ['type' => 'ckeditor',
	                                         'toolbar' => 'Testlink',
                                             'configFile' => 'cfg/tl_ckeditor_config.js',
                                             'height' => 150
                                            ];

$tlCfg->gui->text_editor['summary'] = ['type' => 'ckeditor',
	                                   'toolbar' => 'Testlink',
                                       'configFile' => 'cfg/tl_ckeditor_config.js',
                                       'height' => 600
                                      ]; 



$tlCfg->gui->text_editor['execution'] = array('type' => 'none');
$tlCfg->gui->text_editor['edit_execution'] = array('type' => 'none', 'cols' => 80, 'rows' => 20);
$tlCfg->gui->text_editor['display_execution_notes'] = array('type' => 'none', 'cols' => 80, 'rows' => 20);

/** User can choose order of menu areas */
$tlCfg->gui->layoutMainPageLeft = array( 'testProject' => 1, 'userAdministration' => 2 ,
                                         'requirements' => 3, 'testSpecification' => 4,
                                         'general' => 5);
$tlCfg->gui->layoutMainPageRight = array( 'testPlan' => 1, 'testExecution' => 2 ,
                                          'testPlanContents' => 3);

/**
 * Enable warning on a changed content before an user leave a page.
 *
 * Tested in:
 * - IE8        OK
 * - Firefox 3  OK
 * - Chrome     FAIL
 *
 * Does not work in Webkit browsers (Chrome, Safari) when using frames.
 * Bug in webkit: https://bugs.webkit.org/show_bug.cgi?id=19418
 */

// seems that with config options that will be used on javascript via smarty template variables
// we are having problems using FALSE/TRUE => use 0/1 (or our CONSTANT DISABLED/ENABLED)
$tlCfg->gui->checkNotSaved = ENABLED;


// ----------------------------------------------------------------------------
/* [GUI: TREE] */

/** Default ordering value for new Test Suites and Test Cases to separate them */
$tlCfg->treemenu_default_testsuite_order = 1;
$tlCfg->treemenu_default_testcase_order = 1000;

/** show/hide testcase id on tree menu */
$tlCfg->treemenu_show_testcase_id = TRUE;

/** Reorder test cases based on TC Name or External ID in tree on
 *  test suite level using reorder button 
 */
// 'EXTERNAL_ID' -> Sort on Test Case External ID field displayed on tree.(Default)
// 'NAME' -> Sort on Test Case Name field

$tlCfg->testcase_reorder_by = 'EXTERNAL_ID';
// $tlCfg->testcase_reorder_by = 'NAME';

// ----------------------------------------------------------------------------
/* [GUI: Javascript libraries] */

// May be in future another table sort engine will be better
// kryogenix.org -> Stuart Langridge sortTable
// '' (empty string) -> disable table sorting feature
$g_sort_table_engine='kryogenix.org';


// --------------------------------------------------------------------------------------
/* [Reports] */
$tlCfg->reportsCfg=new stdClass();

//Displayed execution statuses to use on reports (ordered). */
$tlCfg->reportsCfg->exec_status = $tlCfg->results['status_label_for_exec_ui'];

/**
 * Default Offset in seconds for reporting start date (reports with date range)
 * @uses lib/results/resultsMoreBuilds.php
 */
$tlCfg->reportsCfg->start_date_offset = (7*24*60*60); // one week

// minutes part is ignored but must be configured.
// Hint: set always to :00
$tlCfg->reportsCfg->start_time = '00:00';

// Result matrix (resultsTC.php)
$tlCfg->resultMatrixReport = new stdClass();

// Shows an extra column with the result of the latest execution on
// the lastest CREATED build
$tlCfg->resultMatrixReport->buildColumns['showExecutionResultLatestCreatedBuild'] = true;

// Result matrix (resultsTC.php)
// Shows an extra column with the note of latest execution on 
// the lastest CREATED build
$tlCfg->resultMatrixReport->buildColumns['showExecutionNoteLatestCreatedBuild'] = true;

// Show build columns in revers order. The latest build is to the left
$tlCfg->resultMatrixReport->buildColumns['latestBuildOnLeft'] = false;

// After having got performance and usability issue, a limit on max qty of builds
// allowed on data extration has been set.
// Is absolutely arbitrary
// 
$tlCfg->resultMatrixReport->buildQtyLimit = 6;

// ORDER BY sql clause, refers to builds table columns
$tlCfg->resultMatrixReport->buildOrderByClause = " ORDER BY name ASC";


// Show all available status details for test plans on metrics dashboard 
$tlCfg->metrics_dashboard = new stdClass();
$tlCfg->metrics_dashboard->show_test_plan_status = false;




// ----------------------------------------------------------------------------
/* [GENERATED DOCUMENTATION] */

/**
 * Texts and settings for printed documents
 * Image is expected in directory <testlink_root>/gui/themes/<your_theme>/images/
 * Leave text values empty if you would like to hide parameters.
 */
$tlCfg->document_generator->company_name = 'TestLink Community [configure $tlCfg->document_generator->company_name]';
$tlCfg->document_generator->company_copyright = '2021 &copy; TestLink Community';
$tlCfg->document_generator->confidential_msg = '';

// Logo for generated documents
$tlCfg->document_generator->company_logo = $tlCfg->logo_login;
$tlCfg->document_generator->company_logo_height = '53';

/** CSS used in printed html documents */
$tlCfg->document_generator->css_template = 'css/tl_documents.css';

// CSS file for Requirement Specification Document, Requirement and Requirement Spec Print View
$tlCfg->document_generator->requirement_css_template = 'css/tl_documents.css';

/** Misc settings */
// Display test case version when creating:
// - test spec document
// - test reports
$tlCfg->document_generator->tc_version_enabled = TRUE;



// ----------------------------------------------------------------------------
/* [Test Executions] */

// $tlCfg->exec_cfg->enable_test_automation = DISABLED;

// ENABLED -> enable XML-RPC calls to external test automation server
//            new buttons will be displayed on execution pages
// DISABLED -> disable
$tlCfg->exec_cfg->enable_test_automation = DISABLED;


// ASCending   -> last execution at bottom
// DESCending  -> last execution on top      [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->history_order = 'DESC';

// TRUE  -> the whole execution history for the choosen build will be showed
// FALSE -> just last execution for the choosen build will be showed [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->history_on = FALSE;

// TRUE  ->  test case VERY LAST (i.e. in any build) execution status will be displayed [STANDARD BEHAVIOUR]
// FALSE -> only last result on current build.
$tlCfg->exec_cfg->show_last_exec_any_build = TRUE;

// TRUE  ->  History for all builds will be shown
// FALSE ->  Only history of the current build will be shown  [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->show_history_all_builds = FALSE;

// TRUE  ->  History for all platforms (if any exists for test plan) will be shown
// FALSE ->  Only history of the current platform will be shown  [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->show_history_all_platforms = FALSE;

// different models for the attachments management on execution page
// $att_model_m1 ->  shows upload button and title
// $att_model_m2 ->  hides upload button and title
$tlCfg->exec_cfg->att_model = $att_model_m2;   //defined in const.inc.php

// IVU
// Default Value
// USE_LATEST_EXEC_ON_CONTEX_FOR_COUNTERS
// USE_LATEST_EXEC_ON_TESTPLAN_FOR_COUNTERS
// USE_LATEST_EXEC_ON_TESTPLAN_PLAT_FOR_COUNTERS
$tlCfg->exec_cfg->tcases_counters_mode = array();
$tlCfg->exec_cfg->tcases_counters_mode['with_platforms'] =
  USE_LATEST_EXEC_ON_CONTEX_FOR_COUNTERS;

$tlCfg->exec_cfg->tcases_counters_mode['without_platforms'] =
  USE_LATEST_EXEC_ON_TESTPLAN_FOR_COUNTERS;


$tlCfg->exec_cfg->tcases_counters_mode_domain = array();
$tlCfg->exec_cfg->tcases_counters_mode_domain['with_platforms'] =
  array('USE_LATEST_EXEC_ON_CONTEX_FOR_COUNTERS',
        'USE_LATEST_EXEC_ON_TESTPLAN_FOR_COUNTERS',
        'USE_LATEST_EXEC_ON_TESTPLAN_PLAT_FOR_COUNTERS'); 

$tlCfg->exec_cfg->tcases_counters_mode_domain['without_platforms'] =
  array('USE_LATEST_EXEC_ON_CONTEX_FOR_COUNTERS',
        'USE_LATEST_EXEC_ON_TESTPLAN_FOR_COUNTERS'); 




// ENABLED -> test cases will be coloured according to test case status
$tlCfg->exec_cfg->enable_tree_testcases_colouring = ENABLED;

// ENABLED -> test cases will be coloured according to execution status on build selected for execution
// DISABLED -> test cases will be coloured according status on latest execution regardless of selected build
// see http://mantis.testlink.org/view.php?id=3450 for more details 
$tlCfg->exec_cfg->testcases_colouring_by_selected_build = ENABLED;

// ENABLED -> test case counters will be coloured according to test case status
$tlCfg->exec_cfg->enable_tree_counters_colouring = ENABLED;


// This can help to avoid performance problems.
// Controls what happens on right frame when user clicks on a testsuite on tree.
// ENABLED -> show all test cases 
//            see $tlCfg->exec_cfg->show_testsuite_contents_deep
// 
// DISABLED -> nothing happens, to execute a test case you need to click on test case
$tlCfg->exec_cfg->show_testsuite_contents = DISABLED;

// @since 1.9.13
// works in 'team' with $tlCfg->exec_cfg->show_testsuite_contents 
// children: only direct children.
// deep: all test cases present in test suite and test suites in any level below 
//       selected test suite.
// IMPORTANT NOTICE:
// selecting deep can create performance issues.
// 
$tlCfg->exec_cfg->show_testsuite_contents_deep = 'children';


// ENABLED -> enable testcase counters by status on tree
$tlCfg->exec_cfg->enable_tree_testcase_counters = ENABLED;


// Define list of roles that are affected by:
// $tlCfg->exec_cfg->view_mode and $tlCfg->exec_cfg->exec_mode
// User must reconfigure if define other simple tester roles
//
// In addition (till code changes) also roles that verify this condition:
// $effective_role->hasRight('testplan_execute') and !$effective_role->hasRight('testplan_planning')
// Will be affected by:
// $tlCfg->exec_cfg->view_mode and $tlCfg->exec_cfg->exec_mode
//
$tlCfg->exec_cfg->simple_tester_roles=array(TL_ROLES_TESTER);

// Filter Test cases a user with tester role can VIEW depending on
// test execution assignment.
// all: all test cases.
// assigned_to_me: test cases assigned to logged user.
// assigned_to_me_or_free: test cases assigned to logged user or not assigned
$tlCfg->exec_cfg->view_mode->tester='assigned_to_me';

// Filter Test cases a user with tester role can EXECUTE depending on
// test execution assignment.
// all: all test cases.
// assigned_to_me: test cases assigned to logged user.
// assigned_to_me_or_free: test cases assigned to logged user or not assigned
$tlCfg->exec_cfg->exec_mode->tester='assigned_to_me';


// How to set defaut values for execution fields (standard & custom) 
// clean => all clean 
// latest => get as much as possible values from latest execution on
//           same context => test plan,platform, build
$tlCfg->exec_cfg->exec_mode->new_exec='clean';


// @since 1.9.15
// Before 1.9.15 save & move to next worked JUST inside
// a test suite => save_and_move = 'limited'
// 1.9.15 will move on whole test project
// save_and_move = 'unlimited'
$tlCfg->exec_cfg->exec_mode->save_and_move='unlimited';

$tlCfg->exec_cfg->exec_mode->addLinkToTLChecked = false;
$tlCfg->exec_cfg->exec_mode->addLinkToTLPrintViewChecked = false;
$tlCfg->exec_cfg->exec_mode->assignTaskChecked = false;


/** User filter in Test Execution navigator - default value */
// logged_user -> combo will be set to logged user
// none        -> no filter applied by default
$tlCfg->exec_cfg->user_filter_default='none';


// 'horizontal' ->  step and results on the same row
// 'vertical'   ->  steps on one row, results in the row bellow
$tlCfg->exec_cfg->steps_results_layout = 'horizontal';

// true => on single test case execution feature, notes and result
//         can be provided for each step
// false => pre 1.9.10 behaviour
// 
$tlCfg->exec_cfg->steps_exec = true;

// this setting will work on AND mode with: 
// $tlCfg->exec_cfg->steps_exec
$tlCfg->exec_cfg->steps_exec_attachments = true;

// When textarea is displayed to allow user to write execution notes
// at step level, choose what to display:
// 'empty'
// 'latest' => latest execution notes.
$tlCfg->exec_cfg->steps_exec_notes_default = 'empty';


// 'empty'
// 'latest' => latest execution notes.
$tlCfg->exec_cfg->steps_exec_status_default = 'empty';

// Parameters to show notes/details when entering test execution feature
// EXPAND: show expanded/open
// COLLAPSE: show collapsed/closede
// LAST_USER_CHOICE: get status from cookie that holds last user choice.[STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->expand_collapse = new stdClass();
$tlCfg->exec_cfg->expand_collapse->testplan_notes = LAST_USER_CHOICE;
$tlCfg->exec_cfg->expand_collapse->platform_description = LAST_USER_CHOICE;
$tlCfg->exec_cfg->expand_collapse->build_description = LAST_USER_CHOICE;
$tlCfg->exec_cfg->expand_collapse->testsuite_details = LAST_USER_CHOICE;



$tlCfg->exec_cfg->copyLatestExecIssues = new stdClass();

// true => When saving an execution, a new option will be displayed, and user will be
//         able to do a choice
//         COPY OR NOT issues linked to latest execution to the new execution
// DEAFULT false => no option on GUI

$tlCfg->exec_cfg->copyLatestExecIssues->enabled = FALSE;


// value to set as default
$tlCfg->exec_cfg->copyLatestExecIssues->default = FALSE;

// you can choose only between columns present on
// (see exec.inc.php, function get_bugs_for_exec())
$tlCfg->exec_cfg->bugs_order_clause = ' ORDER BY builds.name,step_number,bug_id ';

$tlCfg->exec_cfg->features = new stdClass();
$tlCfg->exec_cfg->features->attachments = new stdClass();
$tlCfg->exec_cfg->features->attachments->enabled = true;
$tlCfg->exec_cfg->features->exec_duration = new stdClass();
$tlCfg->exec_cfg->features->exec_duration->enabled = true;

$tlCfg->exec_cfg->issues = new stdClass();
$tlCfg->exec_cfg->issues->tcase_level = new stdClass();
$tlCfg->exec_cfg->issues->tcstep_level = new stdClass();

/**
 * %%STEPNUMBER%%,%%TCNAME%%,%%PROJECTNAME%%,%%PLANNAME%%
 * %%BUILDNAME%%,%%PLATFNAME%%,%%EXECTSISO%%,
 * %%TCPATHNAME%%
 *
 * /saado/TS100/SAA-4:WSTEPS  Executed ON (ISO FORMAT): 2018-02-25CET10:00
 */
$tlCfg->exec_cfg->issues->tcase_level->subject = 
'$$issue_subject_tcname %%TCPATHNAME%% - $$issue_subject_execon %%EXECTSISO%% ';

/*
$tlCfg->exec_cfg->issues->tcstep_level->subject = 
'$$issue_on_step %%STEPNUMBER%% - $$issue_subject_tcname %%TCNAME%% - ' .
'$$issue_subject_projectname %%PROJECTNAME%% - ' .
'$$issue_subject_planname %%PLANNAME%% - ' .
'$$issue_subject_buildname %%BUILDNAME%% - ' . 
'$$issue_subject_platfname %%PLATFNAME%%';
*/

$tlCfg->exec_cfg->issues->tcstep_level->subject = '$$issue_on_step %%STEPNUMBER%% - $$issue_subject_tcname %%TCNAME%% ';


// ----------------------------------------------------------------------
/* [Test Specification] */

// TRUE will be displayed when displayed a test case
$tlCfg->spec_cfg->show_tplan_usage = TRUE;

// 'horizontal' ->  step and results on the same row
// 'vertical'   ->  steps on one row, results in the row bellow
$tlCfg->spec_cfg->steps_results_layout = 'horizontal';


// ENABLED -> User will see a test suite filter while creating test specification
// DISABLED -> no filter available
// $g_spec_cfg->show_tsuite_filter = ENABLED;
$tlCfg->spec_cfg->show_tsuite_filter = ENABLED;

// ENABLED -> every time user do some operation on test specification
//            tree is updated on screen.
// DISABLED -> tree will not be updated, user can update it manually.
// Anyway on user interface user will be able to change this choice
// $g_spec_cfg->automatic_tree_refresh = ENABLED;
$tlCfg->spec_cfg->automatic_tree_refresh = ENABLED;


// To avoid perfomance problems on search test case feature,
// we can decide when to inform user that results can not be displayed
// due to too many results.
$tlCfg->testcase_cfg->search=new stdClass();
$tlCfg->testcase_cfg->search->max_qty_for_display=200;


$tlCfg->testcase_cfg->duplicated_name_algorithm = new stdClass();
// 'stringPrefix' => use duplicated_name_algorithm->text
// 'counterSuffix' => creare name as :
//                    test case title  + (number of existent test cases +1)
//                    example: My Test Title 2
//                    duplicated_name_algorithm->text is used as sprintf format mask
$tlCfg->testcase_cfg->duplicated_name_algorithm->type = 'stringPrefix';
$tlCfg->testcase_cfg->duplicated_name_algorithm->text = "%Y%m%d-%H:%M:%S";

// $tlCfg->testcase_cfg->duplicated_name_algorithm->type = 'counterSuffix';
// $tlCfg->testcase_cfg->duplicated_name_algorithm->text = " (%s)";


// TICKET 6422: Estimation in Test specification as mandatory field
// Implemented using HTML5
$tlCfg->testcase_cfg->estimated_execution_duration = new stdClass();
// $tlCfg->testcase_cfg->estimated_execution_duration->required = 'required';
$tlCfg->testcase_cfg->estimated_execution_duration->required = '';



// There are some preconfigured standard types which you can use,
// additionally you can configure your own types.
$tlCfg->testcase_cfg->relations = new stdClass();
$tlCfg->testcase_cfg->relations->enable = TRUE;
$tlCfg->testcase_cfg->relations->interproject_linking = FALSE;


/** 
 * Localization identifiers for test cases relation types
 * Types, which are configured above, have to be configured 
 * here too with attributes "source" and "destination".
 *
 * Last value will be selected in GUI as default.
 * 
 * Form has to be like this:
 * 
 * ... = array(
 *    RELATIONNAME => array(
 *      'source' => 'SOURCE_LOCALIZATION_KEY',
 *      'destination' => 'DESTINATION_LOCALIZATION_KEY'),
 *    ...
 * 
 * @since TestLink 1.9.12
 **/

$tlCfg->testcase_cfg->relations->type_labels = array(
  TL_REL_TYPE_PARENT_CHILD => ['source' => 'parent_of','destination' => 'child_of'],
  TL_REL_TYPE_BLOCKS_DEPENDS => ['source' => 'blocks','destination' => 'depends'],
  TL_REL_TYPE_RELATED => ['source' => 'related_to','destination' => 'related_to'],
  TL_REL_TYPE_AUTOMATION_PARENT_CHILD => ['source' => 'automates_also', 'destination' => 'is_automated_by'],
  TL_REL_TYPE_EXECUTE_TOGETHER => ['source' => 'executed_me_and_also', 'destination' => 'executed_me_and_also']
);



$tlCfg->testcase_cfg->relations->type_description = [
  TL_REL_TYPE_PARENT_CHILD => 'parent_child',
  TL_REL_TYPE_BLOCKS_DEPENDS => 'blocks_depends',
  TL_REL_TYPE_RELATED => 'related_to',
  TL_REL_TYPE_AUTOMATION_PARENT_CHILD => 'automation_script',
  TL_REL_TYPE_EXECUTE_TOGETHER => 'executed_me_and_also'
];




// @since 1.9.18
// TRUE => After a test case version has been executed 
//         attachment on test case spec can not be added/removed
//         
// FALSE  
//
// This means that at GUI Level, will not be possible:
// add a new attachment to an Executed Test Case Version
// delete an attachment from Executed Test Case Version
$tlCfg->testcase_cfg->downloadOnlyAfterExec = TRUE;

// This means that at GUI Level, will not be possible:
// add a new req version link to an Executed Test Case Version
// delete a req version link from Executed Test Case Version
$tlCfg->testcase_cfg->reqLinkingDisabledAfterExec = TRUE;

// Effects on Linked Requirements Version after 
// execution of a Test Case Version
$tlCfg->testcase_cfg->freezeReqVersionAfterExec = TRUE;


// Effects on TCVersion N when TCVersion N+1 is created 
$tlCfg->testcase_cfg->freezeTCVersionOnNewTCVersion = TRUE;
$tlCfg->testcase_cfg->freezeTCVRelationsOnNewTCVersion = TRUE;

// Because: 
// The Relation must be frozen (cannot be deleted) when 
// a new version of the test case is created.
//
// It seems confusing that relation can be added, then
// this new configuration will allow this operation
// only on latest test case version
// 
$tlCfg->testcase_cfg->addTCVRelationsOnlyOnLatestTCVersion = TRUE;


// Not Already Implemented
//$tlCfg->testcase_cfg->allowAddTCVRelationsOnOldTCVersion = TRUE;

//$tlCfg->testcase_cfg->frozenNotExecutedTCVDelAttachtments = FALSE;
//$tlCfg->testcase_cfg->frozenNotExecutedTCVAddAttachtments = FALSE;
//$tlCfg->testcase_cfg->frozenNotExecutedTCVAddTCVRel = FALSE;
//$tlCfg->testcase_cfg->frozenNotExecutedTCVDelTCVRel = FALSE;
//$tlCfg->testcase_cfg->frozenNotExecutedTCVAddREQVLink = FALSE;
//$tlCfg->testcase_cfg->frozenNotExecutedTCVDelREQVLink = FALSE;


// Change order using CSS flexbox model
// @used-by tcEdit.tpl
$tlCfg->testcase_cfg->viewerFieldsOrder = new stdClass();
$tlCfg->testcase_cfg->viewerFieldsOrder->summary = 3;
$tlCfg->testcase_cfg->viewerFieldsOrder->spaceOne = 2;
$tlCfg->testcase_cfg->viewerFieldsOrder->preconditions = 1;





// Effects on Req Version to TCVersion LINK 
// when a new version of a linked Test Case is created
// If LINK is frozen, then this means that link can not be deleted.
// $tlCfg->reqTCLinks->freezeLinkOnNewTCVersion = FALSE;
//
// Important Notice:
// Req Version to TCVersion Link can be done ONLY TO LATEST TCV.
// 
// This means that :
// 
// on GUI on the Requirements Area on TEST CASE Specification Feature:
// this option has NO EFFECT 
//
// on GUI on the Coverage Area on REQUIREMENT Specification Feature:
// this option has EFFECT
//
// on GUI on the Assign Requirements Feature:
// this option has EFFECT
//
$tlCfg->reqTCLinks->freezeLinkOnNewTCVersion = TRUE;

// Effects on Req Version to TCVersion LINK 
// when a new version of a linked Req Version is created
$tlCfg->reqTCLinks->freezeLinkOnNewREQVersion = TRUE;


// Effects on BOTH ends of Req Version to TCVersion LINK 
// when a new version of a linked TC Version is created
$tlCfg->reqTCLinks->freezeBothEndsOnNewTCVersion = TRUE;

// Effects on BOTH ends of Req Version to TCVersion LINK 
// when a new version of a linked REQ Version is created
$tlCfg->reqTCLinks->freezeBothEndsOnNewREQVersion = TRUE;


// Effects on REQ Version N when REQ Version N+1 is created 
$tlCfg->req_cfg->freezeREQVersionOnNewREQVersion = TRUE;


/** text template for a new items:
    Test Case: summary, steps, expected_results, preconditions

*/
// object members has SAME NAME that FCK editor objects.
// the logic present on tcEdit.php is dependent of this rule.
// every text object contains an object with following members: type and value
//
// Possible values for type member:
// none: template will not be used, default will be a clean editor screen.
//
// string: value of value member is assigned to FCK object
// string_id: value member is used in a lang_get() call, and return value
//       is assigned to FCK object. Configure string_id on custom_strings.txt
// value: value member is used as file name.
//       file is readed and it's contains assigned to FCK object
//
// any other value for type, results on '' assigned to FCK object

$tlCfg->testcase_template = new stdClass();

$tlCfg->testcase_template->summary = new stdClass();
$tlCfg->testcase_template->summary->type = 'none';
$tlCfg->testcase_template->summary->value = '';

$tlCfg->testcase_template->steps = new stdClass();
$tlCfg->testcase_template->steps->type = 'none';
$tlCfg->testcase_template->steps->value = '';

$tlCfg->testcase_template->expected_results = new stdClass();
$tlCfg->testcase_template->expected_results->type = 'none';
$tlCfg->testcase_template->expected_results->value = '';

$tlCfg->testcase_template->preconditions = new stdClass();
$tlCfg->testcase_template->preconditions->type = 'none';
$tlCfg->testcase_template->preconditions->value = '';


/** text template for a new Test Suite description */
$tlCfg->testsuite_template = new stdClass();
$tlCfg->testsuite_template->details = new stdClass();
$tlCfg->testsuite_template->details->type = 'none';
$tlCfg->testsuite_template->details->value = '';

$tlCfg->project_template = new stdClass();
$tlCfg->project_template->notes  = new stdClass();
$tlCfg->project_template->notes->type = 'none';
$tlCfg->project_template->notes->value = '';

$tlCfg->testplan_template = new stdClass();
$tlCfg->testplan_template->notes = new stdClass();
$tlCfg->testplan_template->notes->type = 'none';
$tlCfg->testplan_template->notes->value = '';

$tlCfg->execution_template = new stdClass();
$tlCfg->execution_template->bulk_exec_notes = new stdClass();
$tlCfg->execution_template->bulk_exec_notes->type = 'none';
$tlCfg->execution_template->bulk_exec_notes->value = '';

$tlCfg->execution_template->notes = new stdClass();
$tlCfg->execution_template->notes->type = 'none';
$tlCfg->execution_template->notes->value = '';

$tlCfg->build_template = new stdClass();
$tlCfg->build_template->notes = new stdClass();
$tlCfg->build_template->notes->type = 'none';
$tlCfg->build_template->notes->value = '';

$tlCfg->requirement_template = new stdClass();
$tlCfg->requirement_template->scope = new stdClass();
$tlCfg->requirement_template->scope->type = 'none';
$tlCfg->requirement_template->scope->value = '';

$tlCfg->req_spec_template = new stdClass();
$tlCfg->req_spec_template->scope = new stdClass();
$tlCfg->req_spec_template->scope->type = 'none';
$tlCfg->req_spec_template->scope->value = '';

$tlCfg->role_template = new stdClass();
$tlCfg->role_template->notes = new stdClass();
$tlCfg->role_template->notes->type = 'none';
$tlCfg->role_template->notes->value = '';


$tlCfg->platform_template = new stdClass();
$tlCfg->platform_template->notes = new stdClass();
$tlCfg->platform_template->notes->type = 'none';
$tlCfg->platform_template->notes->value = '';

// ----------------------------------------------------------------------------
/* [ATTACHMENTS] */

/** Attachment feature availability */
$tlCfg->attachments = new stdClass();
$tlCfg->attachments->enabled = TRUE;

// TRUE -> when you upload a file you can give no title
$tlCfg->attachments->allow_empty_title = TRUE;

// $tlCfg->attachments->allow_empty_title == TRUE, you can ask the system
// to do something
//
// 'none'         -> just write on db an empty title
// 'use_filename' -> use filename as title
//$tlCfg->attachments->action_on_save_empty_title='use_filename';
//
$tlCfg->attachments->action_on_save_empty_title = 'none';

// Remember that title is used as link description for download
// then if title is empty, what the system has to do when displaying ?
// 'show_icon'  -> the $tlCfg->attachments->access_icon will be used.
// 'show_label' -> the value of $tlCfg->attachments->access_string will be used .
$tlCfg->attachments->action_on_display_empty_title = 'show_icon';

// Set display order of uploaded files 
$tlCfg->attachments->order_by = " ORDER BY date_added DESC ";


// need to be moved AFTER include of custom_config
//
// $tlCfg->attachments->access_icon = '<img src="' . $tlCfg->theme_dir . 'images/new_f2_16.png" style="border:none" />';
$tlCfg->attachments->access_string = "[*]";

/**
 * Files that are allowed.  Separate items by commas.
 * eg. 'doc,xls,gif,png,jpg'
 */
$tlCfg->attachments->allowed_files = 'doc,xls,gif,png,jpg,xlsx,csv';


/**
 * Process filename against XSS
 * Thanks to http://owasp.org/index.php/Unrestricted_File_Upload
 *   '/^[a-zA-Z0-9]{1,20}\.[a-zA-Z0-9]{1,10}$/'; 
 *   added - and _.
 * 
 * NO CHECK if -> $g_attachments->allowed_filenames_regexp = '';
 *
 */
$tlCfg->attachments->allowed_filenames_regexp = '/^[a-zA-Z0-9_-]{1,20}\.[a-zA-Z0-9]{1,10}$/';


/** the type of the repository can be database or filesystem
 * TL_REPOSITORY_TYPE_DB => database
 * TL_REPOSITORY_TYPE_FS => filesystem
 **/
$g_repositoryType = TL_REPOSITORY_TYPE_FS;

/**
 * TL_REPOSITORY_TYPE_FS: the where the filesystem repository should be located
 * We recommend to change the directory for security reason.
 * (see http://itsecuritysolutions.org/2012-08-13-TestLink-1.9.3-multiple-vulnerabilities/)
 * Put it out of reach via web or configure access denied.
 *
 **/
$g_repositoryPath = '/var/testlink/upload_area/';  /* unix example */
if (($upa = getenv('TESTLINK_UPLOAD_AREA'))) {
  $g_repositoryPath = trim($upa);
}

/**
 * compression used within the repository
 * TL_REPOSITORY_COMPRESSIONTYPE_NONE => no compression
 * TL_REPOSITORY_COMPRESSIONTYPE_GZIP => gzip compression
 */
$g_repositoryCompressionType = TL_REPOSITORY_COMPRESSIONTYPE_NONE;

// the maximum allowed file size for each repository entry, default 1MB.
// Also check your PHP settings (default is usually 2MBs)
$tlCfg->repository_max_filesize = 1; //MB




// ----------------------------------------------------------------------------
/* [Requirements] */

// HAS TO BE REMOVED - > req_doc_id UNIQUE INSIDE test project
// true : you want req_doc_id UNIQUE IN THE WHOLE DB (system_wide)
// false: you want req_doc_id UNIQUE INSIDE a SRS
// $tlCfg->req_cfg->reqdoc_id->is_system_wide = FALSE;

$tlCfg->req_cfg->monitor_enabled = true;

// truncate log message to this amount of chars for reqCompareVersions
$tlCfg->req_cfg->log_message_len = 200;

/**
 * Test Case generation from Requirements - use_req_spec_as_testsuite_name
 *  FALSE => test cases are created and assigned to a test suite
 *           with name $tlCfg->req_cfg->default_testsuite_name
 *  TRUE  => REQuirement Specification Title is used as testsuite name
 */
$tlCfg->req_cfg->use_req_spec_as_testsuite_name = TRUE;
$tlCfg->req_cfg->default_testsuite_name = "Auto-created Test cases";
$tlCfg->req_cfg->testsuite_details = "Test Cases in the Test Suite are generated from Requirements. " .
                                "A refinement of test scenario is highly recommended.";
$tlCfg->req_cfg->testcase_summary_prefix = "<b>The Test Case was generated from the assigned requirement.</b><br />";


// If the following value is enabled, then the summary prefix string will include the
// title and version number of the assigned requirement.
$tlCfg->req_cfg->use_testcase_summary_prefix_with_title_and_version = ENABLED;

// If above option is enabled, the following string will be used as a template for the tc summary prefix.
// It has to include four variables in the form of "%s". The first and second one will be used internally by the system.
// The third one will then be replaced by the title of the originating Requirement,
// the fourth one by its version number.
// Attention: If there aren't exactly three variables in it, the operation will fail.
$tlCfg->req_cfg->testcase_summary_prefix_with_title_and_version = "<b>The Test Case was generated from the assigned" .
    " requirement <a href=\"javascript:openLinkedReqVersionWindow(%s,%s)\">\"%s\" (version %s)</a>.</b><br />";

/**
 * ENABLED: When generating Test Cases from Requirements, copy the scope of the Requirement
 * to the summary of the newly created Test Case.
 */
$tlCfg->req_cfg->copy_req_scope_to_tc_summary = DISABLED;


// To avoid perfomance problems on search Requirements feature,
// we can decide when to inform user that results can not be displayed
// due to too many results.
$tlCfg->req_cfg->search=new stdClass();
$tlCfg->req_cfg->search->max_qty_for_display=200;


// ENABLED: allow N level depth tree
// DISABLED: just one level
$tlCfg->req_cfg->child_requirements_mgmt = ENABLED;


// ENABLED: ask for this value on user interface and use on several features
// DISABLED: do not ask, do not use
$tlCfg->req_cfg->expected_coverage_management = ENABLED;

// Show Child Requirements on Requirement Specification Print View
// ENABLED: Requirement Specification including Child Requirements are shown
// DIABLED: ONLY Requirement Specification is shown
$tlCfg->req_cfg->show_child_reqs_on_reqspec_print_view = DISABLED;

// 
// Order of test cases status in this array, is used to undestand
// to what status set requirement in the requirements report.
// Standard algorithm, present in getReqCoverage(), is:
//
// if at least one of Test Cases linked to Requirement has status FAILED
//    Requirement Coverage Status = FAILED
// else if at least one of Test Cases linked to Requirement has status BLOCKED
//    Requirement Coverage Status = BLOCKED
// else if ALL Test Cases linked to Requirement has status NOT RUN
//    Requirement Coverage Status = NOT RUN
// else if ALL Test Cases linked to Requirement has status PASSED
//    Requirement Coverage Status = PASSED
// else
//    Requirement Coverage Status = Partially Passed
//
// This logic is implemented using following config parameter
$tlCfg->req_cfg->coverageStatusAlgorithm['checkOrder']=array('atLeastOne','all');
$tlCfg->req_cfg->coverageStatusAlgorithm['checkType']['atLeastOne']=array('failed','blocked');
$tlCfg->req_cfg->coverageStatusAlgorithm['checkType']['all']=array('passed');

// Configure here what status has to get requirement when check of type 'all' fails like
// in following situation (Mantis 2171)
//
// If particular requirement has assigned more than one test cases, and:
// - at least one of assigned test cases was not yet executed
// - the rest of assigned test cases was executed and passed
// then on the "Requirements based report" this particular requirement is not shown at all (in any section).
//
// $tlCfg->req_cfg->coverageStatusAlgorithm['checkFail']['all']='partially_passed';
// $tlCfg->req_cfg->coverageStatusAlgorithm['displayOrder']=array('passed','failed',
//                                                                'blocked','not_run','partially_passed');
// 20100819 - asimon - fix not needed anymore after rewrite of req based report
//$tlCfg->req_cfg->coverageStatusAlgorithm['checkFail']['all']='failed';
//$tlCfg->req_cfg->coverageStatusAlgorithm['displayOrder']=array('passed','failed','blocked','not_run');




// truncate log message to this amount of chars for reqSpecCompareRevisions
$tlCfg->req_spec_cfg->log_message_len = 200;


// Linking between requirements/requirement specifications
//
$tlCfg->internal_links =  new stdClass();

//
// TRUE: links to other requirements/requirement specifications are
//       automatically generated from the corresponding Document ID, enclosed by tags (like BBCode).
//
// Usage:
// link to requirements: [req]req_doc_id[/req]
// link to requirement specifications: [req_spec]req_spec_doc_id[/req_spec]
//
// The test project of the requirement / requirement specification and an anchor
// to jump to can also be specified:
// [req tproj=<tproj_prefix> anchor=<anchor_name>]req_doc_id[/req]
// This syntax also works for requirement specifications.
//
// FALSE: no links are automatically created. 
//
$tlCfg->internal_links->enable =  TRUE;

// how a linked document (requirement/requirement specification) should be displayed.
// posible values:
//                'window': new window/tab will be used (depending on browser configuration)
//                'frame' : same frame as the clicked link
//                'popup' (default): popup window  (ATTENTION to browser pop-up block).
//
$tlCfg->internal_links->target = 'popup';

// title for automatically created link
// possible values:
//                 'string': lang_get() will be used to localize
//                 'none': no title will be generated, only link with ID
//                 'item' (default): localized type of item (e.g. "Requirement: ",  "Req Spec")
//                                   will be used as title for the generated link
//
$tlCfg->internal_links->req_link_title = new stdClass();
$tlCfg->internal_links->req_link_title->type = 'item';
$tlCfg->internal_links->req_link_title->value = '';

$tlCfg->internal_links->req_spec_link_title = new stdClass();
$tlCfg->internal_links->req_spec_link_title->type = 'item';
$tlCfg->internal_links->req_spec_link_title->value = '';


// Relations between requirement documents:
//
// The relation types have to be configured in cfg/const.inc.php
// and their respective localization values in locale strings.txt.

// There are some preconfigured standard types which you can use,
// additionally you can configure your own types.
$tlCfg->req_cfg->relations = new stdClass();
$tlCfg->req_cfg->relations->enable = TRUE;
$tlCfg->req_cfg->relations->interproject_linking = FALSE;

// Requirement/testcase diff
// default value of lines to show before and after each difference
$tlCfg->diffEngine->context = 5;


// Configuration for Requirement Import using DOCBOOK format
$tlCfg->req_cfg->importDocBook = new stdClass();
$tlCfg->req_cfg->importDocBook->requirement= "sect3";
$tlCfg->req_cfg->importDocBook->title= "title";
$tlCfg->req_cfg->importDocBook->paragraph= "para";
$tlCfg->req_cfg->importDocBook->ordered_list="orderedlist";
$tlCfg->req_cfg->importDocBook->list_item="listitem";
$tlCfg->req_cfg->importDocBook->table="informaltable";
$tlCfg->req_cfg->importDocBook->table_group="tgroup";
$tlCfg->req_cfg->importDocBook->table_head="thead";
$tlCfg->req_cfg->importDocBook->table_body="tbody";
$tlCfg->req_cfg->importDocBook->table_row="row";
$tlCfg->req_cfg->importDocBook->table_entry="entry";
$tlCfg->req_cfg->importDocBook->list_item_children = array('para','title');
$tlCfg->req_cfg->importDocBook->table_entry_children = array('para');


// If an external tool is used for requirement management, enable this setting.
// You will get an additional field on requirement specifications where you
// can enter the total count of requirements so that external requirements
// are also counted for metrics/statistics. 
$tlCfg->req_cfg->external_req_management = DISABLED;


//If enabled an icon next to Document ID field will show up that allows
//to insert the last defined Requirement Document ID within the same Project
//into Document ID field
$tlCfg->req_cfg->allow_insertion_of_last_doc_id = DISABLED;


// used ONLY to configure the mask (text) .
// algorithm type is fixed HARDCODED
//
$tlCfg->req_cfg->duplicated_name_algorithm = new stdClass();
$tlCfg->req_cfg->duplicated_name_algorithm->text = " (%s)";

$tlCfg->req_cfg->duplicated_docid_algorithm = new stdClass();
$tlCfg->req_cfg->duplicated_docid_algorithm->text = " (%s)";


// ----------------------------------------------------------------------------
/* [TREE FILTER CONFIGURATION] */

/* In the following section, you can configure which filters shall be used
 * in combination with the tree view for testcases and requirements.
 * There are five available filter modes (four for the testcase tree,
 * one for requirement documents), which are used for the different features
 * as listed here:
 *
 * For Test Cases:
 * --> execution_mode
 *    execution of testcases
 * --> edit_mode
 *    create and edit testcases
 *    assign keywords to testcases
 *    assign requirements to testcases
 * --> plan_mode
 *    assign testcase execution to users
 *    update linked versions for testplan
 *    set urgent testcases
 * --> plan_add_mode
 *    add/remove testcases to/from testplan
 *
 * For Requirements:
 * There are no modes defined, there is only one filter configuration.
 * The filters configured here will be used for requirement editing.
 */
$tlCfg->tree_filter_cfg = new stdClass();
$tlCfg->tree_filter_cfg->testcases = new stdClass();
$tlCfg->tree_filter_cfg->requirements = new stdClass();

// These are the available filter modes for testcases:
$tlCfg->tree_filter_cfg->testcases->execution_mode = new stdClass();
$tlCfg->tree_filter_cfg->testcases->edit_mode = new stdClass();
$tlCfg->tree_filter_cfg->testcases->plan_mode = new stdClass();
$tlCfg->tree_filter_cfg->testcases->plan_add_mode = new stdClass();

// If you disable one of these items here, you switch
// the complete filter panel off for a specific mode/feature.
// You should rather do this here instead of individually disabling all the filters,
// if you don't want to have any filters at all for a given feature.
$tlCfg->tree_filter_cfg->testcases->execution_mode->show_filters = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->show_filters = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->show_filters = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->show_filters = ENABLED;
$tlCfg->tree_filter_cfg->requirements->show_filters = ENABLED;

// Detailed settings for each mode.
// Here, the single filter fields can be disabled if not wanted.
// Also, the choice of advanced filter mode can be disabled.
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_tc_id = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_testcase_name = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_toplevel_testsuite = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_keywords = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_priority = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_execution_type = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_assigned_user = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_custom_fields = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_result = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->filter_bugs = ENABLED;
$tlCfg->tree_filter_cfg->testcases->execution_mode->advanced_filter_mode_choice = ENABLED;

$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_tc_id = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_testcase_name = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_toplevel_testsuite = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_keywords = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_platforms = ENABLED;

$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_active_inactive = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_importance = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_execution_type = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_custom_fields = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->filter_workflow_status = ENABLED;
$tlCfg->tree_filter_cfg->testcases->edit_mode->advanced_filter_mode_choice = ENABLED;

$tlCfg->tree_filter_cfg->testcases->edit_mode
      ->filter_workflow_status_values = array();

$tlCfg->tree_filter_cfg->testcases->plan_mode->filter_tc_id = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->filter_testcase_name = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->filter_toplevel_testsuite = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->filter_keywords = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->filter_priority = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->filter_execution_type = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->filter_assigned_user = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->filter_custom_fields = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->filter_result = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->advanced_filter_mode_choice = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_mode->setting_build_inactive_out = FALSE;
$tlCfg->tree_filter_cfg->testcases->plan_mode->setting_build_close_out = FALSE;


$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_tc_id = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_testcase_name = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_toplevel_testsuite = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_keywords = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_active_inactive = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_importance = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_execution_type = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_workflow_status = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_custom_fields = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->advanced_filter_mode_choice = ENABLED;
$tlCfg->tree_filter_cfg->testcases->plan_add_mode->filter_platforms = ENABLED;


$tlCfg->tree_filter_cfg->requirements->filter_doc_id = ENABLED;
$tlCfg->tree_filter_cfg->requirements->filter_title = ENABLED;
$tlCfg->tree_filter_cfg->requirements->filter_status = ENABLED;
$tlCfg->tree_filter_cfg->requirements->filter_type = ENABLED;
$tlCfg->tree_filter_cfg->requirements->filter_spec_type = ENABLED;
$tlCfg->tree_filter_cfg->requirements->filter_coverage = ENABLED;
$tlCfg->tree_filter_cfg->requirements->filter_relation = ENABLED;
$tlCfg->tree_filter_cfg->requirements->filter_tc_id = ENABLED;
$tlCfg->tree_filter_cfg->requirements->filter_custom_fields = ENABLED;
$tlCfg->tree_filter_cfg->requirements->advanced_filter_mode_choice = ENABLED;

// ENABLED -> Every time the user does some operation on requirement spec,
//            the tree will be updated on screen. [DEFAULT]
// DISABLED -> The tree will not be updated automatically, but  the user can update it manually.
//             On graphical user interface any user will is able to change this setting.
$tlCfg->tree_filter_cfg->requirements->automatic_tree_refresh = ENABLED;



/* [Assign test cases to test plan] */
$tlCfg->tplanDesign->hideTestCaseWithStatusIn = array($tlCfg->testCaseStatus['obsolete'] => 'obsolete',
                            $tlCfg->testCaseStatus['future'] => 'future' );

// ----------------------------------------------------------------------------
/* [MISC FUNCTIONALITY] */

/** Maximum uploadfile size to importing stuff in TL */
// Also check your PHP settings (default is usually 2MBs)
// unit BYTES is required by MAX_FILE_SIZE HTML option
$tlCfg->import_file_max_size_bytes = '800000';

/** Maximum line size of the imported file */
$tlCfg->import_max_row = '10000'; // in chars

/** Set the default role used for new users */
// - created from the login page.
// - created using user management features
$tlCfg->default_roleid = TL_ROLES_GUEST;

// only show custom fields if their value isn't empty
$tlCfg->custom_fields->show_custom_fields_without_value = true;

/** used to check size in char for TEXT AREA type custom fields */
// can not be greater that column definition on DB
// 0 => do not check.
$tlCfg->custom_fields->max_length = 255;

// sizes for HTML INPUTS
// for list, multiselection list 
//  - MAXIMUM number of items displayed at once
//  
// for checkbox,radio is useless
// Hint: more than 120 produce weird effects on user interface
//
$tlCfg->custom_fields->sizes = array('string' => 100,
                                     'numeric' => 10,
                                     'float' => 10,
                                     'email' => 100,
                                     'list' => 1,
                                     'multiselection list' => 5,
                                     'text area' => array('rows' => 6, 'cols' => 80),
                                     'script' => 100,
                                     'server' => 100);

// Use this variable (on custom_config.inc.php) to define new Custom Field types.
// IMPORTANT:
//           check $custom_field_types property on cfield_mgr.class.php
//           to avoid overwrite of standard types.
//
$tlCfg->gui->custom_fields->types = null;

// Use this variable (on custom_config.inc.php)
// to define possible values behaviour for new Custom Field types.
//
// IMPORTANT:
//           check $possible_values_cfg property on cfield_mgr.class.php
//           to avoid overwrite of standard values.
//
$tlCfg->gui->custom_fields->possible_values_cfg = null;


/**
 * Check unique titles of Test Project, Test Suite and Test Case
 *  ENABLED  => Check              [STANDARD BEHAVIOUR]
 *  DISABLED => don't check
 **/
$tlCfg->check_names_for_duplicates = ENABLED;

/**
 * Action for duplication check (only if check_names_for_duplicates=ENABLED)
 * 'allow_repeat' => allow the name to be repeated (backward compatibility)
 * 'generate_new' => generate a new name using $g_prefix_name_for_copy
 * 'block'        => return with an error
 **/
$tlCfg->action_on_duplicate_name = 'generate_new';

/**
 * String checking and conversions
 * Allow automatically convert www URLs and email adresses into clickable links
 * used by function string_display_links() for example by custom fields.
 * Valid values = ENABLED/DISABLED.
 **/
$tlCfg->html_make_links = ENABLED;

/**
 * Define the valid html tags for "content driven" single-line and multi-line fields.
 * Do NOT include tags with parameters (eg. <font face="arial">), img and href.
 * It's used by function string_display_links() for example by custom fields.
 */
$tlCfg->html_valid_tags = 'p, li, ul, ol, br, pre, i, b, u, em';
$tlCfg->html_valid_tags_single_line = 'i, b, u, em';

/**
 * Defines the threshold values for filtering TC by a priority according to the formula
 * LOW  => all Tc's with (urgency*importance) < LOW_Threshold
 * HIGH   => all Tc's with (urgency*importance) >= HIGH_Threshold
 * MEDIUM  => all Tc's with (urgency*importance) >= LOW_Threshold AND (urgency*importance) < HIGH_Threshold
 */
$tlCfg->urgencyImportance = new stdClass();
$tlCfg->urgencyImportance->threshold['low'] = 3;
$tlCfg->urgencyImportance->threshold['high'] = 6;

/**
 * @var boolean Demo mode disables some functionality
 * user edit disable
 * role create ENABLED
 * user create ENABLED
 * special users manage DISABLE
 */
$tlCfg->demoMode = OFF;
$tlCfg->demoSpecialUsers = array('admin');

/**
 * If enabled, every Ext JS table in TestLink will offer an export button,
 * which generates a file with the contents of the table.
 * ATTENTION: This feature is fully experimental. Enable at your own risk!
 *            Enabling it can cause broken tables.
 */
$tlCfg->enableTableExportButton = DISABLED;


/**
 * Taken from Mantis to implement better login security
 * and solve TICKET 4342.
 */
$tlCfg->auth_cookie = $tlCfg->cookie->prefix . 
                      "TESTLINK_USER_AUTH_COOKIE";

/** 
Used when creating a Test Suite using copy
and you have choose  $g_action_on_duplicate_name = 'generate_new'
if the name exist.
*/
$g_prefix_name_for_copy = date("Y-m-d-H:i:s", time());


/** 
 * Configurable templates this can help if you want to use a non standard template.
 * i.e. you want to develop a new one without loosing the original template.
 * key: original TL template name WITHOUT extension
 * value: whatever name you want, only constrain you have to copy your template
 *        ON SAME FOLDER where original template is. 
 * See example below        
 */
$g_tpl = array('inc_exec_controls' => 'inc_exec_img_controls.tpl');
//$g_tpl = array('inc_exec_controls' => 'inc_exec_controls.tpl');
$g_tpl['login'] = 'login/login-model-marcobiedermann.tpl'; 

// Example 
// $g_tpl = array('tcView'  => 'custom_tcView.tpl',
//                 'tcSearchView' => 'myOwnTCSearchView.tpl',
//                 'tcEdit' => 'tcEdit_ultraCool.tpl');

/** Add o replace images */
$tlCfg->images = array();

// ----------------------------------------------------------------------------
/* [REST API using Slim - Begin] */
$tlCfg->restAPI = new stdClass();

// CRITIC 
// This will work if your url to test link 
// is something like
//
// https://testlink.antartic.org/
//
$tlCfg->restAPI->basePath = "/lib/api/rest/v3";

// If your URL is like this
//   https://myserver.ibiza.org/testlink/
// You need to use:
//   $basePath = "/testlink/lib/api/rest/v3";
//
// The standard .htaccess provided with testlink, 
// that is similar to the .htaccess provided by MantisBT
// it's ok!!!
// No need to proceed as detailed in this documentation
// - https://www.slimframework.com/docs/v4/start/web-servers.html 
//   Section: Running in a sub-directory
//
// - https://akrabat.com/running-slim-4-in-a-subdirectory/
//   BUT this is a good example to understand how to configure 
//
/* [REST API using Slim - End] */



// ----------------------------------------------------------------------------
/* [PROXY] */
/* Used only */ 
/* mantissoapInterface.class.php */
/* jirasoapInterface.class.php */
/* jirarestInterface.class.php */
$tlCfg->proxy->host = null;
$tlCfg->proxy->port = null;
$tlCfg->proxy->login = null;
$tlCfg->proxy->password = null;


/** Plugins feature */
define('TL_PLUGIN_PATH', dirname(__FILE__) . DIRECTORY_SEPARATOR . 'plugins' . DIRECTORY_SEPARATOR);

// ----- End of Config ------------------------------------------------------------------
// --------------------------------------------------------------------------------------
// DO NOT DO CHANGES BELOW
// --------------------------------------------------------------------------------------

/** Functions for check request status */
require_once('configCheck.php');


if( !defined('TL_JQUERY') )
{
  define('TL_JQUERY','jquery-2.2.4.min.js' );
}

if( !defined('TL_DATATABLES_DIR') )
{
  define('TL_DATATABLES_DIR','DataTables-1.10.24' );
}

/** root of testlink directory location seen through the web server */
/*  20070106 - franciscom - this statement it's not 100% right
    better use $_SESSION['basehref'] in the scripts. */
define('TL_BASE_HREF', get_home_url(array('force_https' => $tlCfg->force_https)));

clearstatcache();
if ( file_exists( TL_ABS_PATH . 'custom_config.inc.php' ) )
{
  require_once( TL_ABS_PATH . 'custom_config.inc.php' );
}


if( !isset($tlCfg->attachments->access_icon) ) {
  $tlCfg->attachments->access_icon = 
    '<img src="' . $tlCfg->theme_dir . 
    'images/new_f2_16.png" style="border:none" />';
}


// Important to do this only after custom_* to use (if exists) redefinition of
// $tlCfg->results['status_label_for_exec_ui']
$tlCfg->reportsCfg->exec_status = $tlCfg->results['status_label_for_exec_ui'];


/** Support for localization */
//  @TODO move the code out of config and do it only once and 
//  not always in any include!
//  @TODO a better parsing function should be include
$serverLanguage = false;
if (isset($_SERVER['HTTP_ACCEPT_LANGUAGE']))
{
  @list($code) = explode(",",$_SERVER['HTTP_ACCEPT_LANGUAGE']);
  @list($a,$b) = explode("-",$code);
  if ($a && $b)
  {
    $a = strtolower($a);
    $b = strtoupper($a);
    $serverLanguage = $a."_".$b;
  }
}

if(false !== $serverLanguage)
{
  if (array_key_exists($serverLanguage,$tlCfg->locales))
  { 
    $tlCfg->default_language = $serverLanguage;
  } 
}
define ('TL_DEFAULT_LOCALE', $tlCfg->default_language);

// Reverted execution status is used for two applications.
// 1. To map code to CSS, Please if you add an status you need to add a corresponding CSS Class
//    in the CSS files (see the gui directory)
// 2. to decode from code to some more human oriented to use in code
//
/** Revered list of Test Case execution results */
$tlCfg->results['code_status'] = array_flip($tlCfg->results['status_code']);

// Enable CSRF global protection
$tlCfg->csrf_filter_enabled = TRUE;

// ---------------------------------------------------------------------------------
/** Converted and derived variables (Users should not modify this section) */
define('REFRESH_SPEC_TREE',$tlCfg->spec_cfg->automatic_tree_refresh ? 1 : 0);
define('TL_SORT_TABLE_ENGINE',$g_sort_table_engine);
define("TL_REPOSITORY_MAXFILESIZE", 1024*1024*$tlCfg->repository_max_filesize);

define('TL_XMLEXPORT_HEADER', "<?xml version=\"1.0\" encoding=\"" . $tlCfg->charset . "\"?>\n");



// ---------------------------------------------------------------------------------
// when a role is deleted, a new role must be assigned to all users
// having role to be deleted
// A right choice seems to be using $g_default_roleid.
// You can change this adding a config line in custom_config.inc.php
// @TODO martin: remove - use directly $tlCfg->default_roleid;
$g_role_replace_for_deleted_roles = $tlCfg->default_roleid;


/**
 * Using "|" in the testsuite name causes malformed URLs
 * regexp used to check for chars not allowed in:
 * test project, test suite and testcase names.
 * @TODO martin: encode harm characters @see http://cz.php.net/urlencode (and remove the parameter)
 *
 * now is preg pattern
 */
$g_ereg_forbidden = "/[|]/i";



/**
 * @TODO remove from TL - unfinished refactorization;
 * use $tlCfg instead of old variables and constants
 */
define('TL_IMPORT_ROW_MAX', $tlCfg->import_max_row);
define('TL_TPL_CHARSET', $tlCfg->charset);
define('TITLE_SEP',$tlCfg->gui_title_separator_1);
define('TITLE_SEP_TYPE2',$tlCfg->gui_title_separator_2);
define('TITLE_SEP_TYPE3',$tlCfg->gui_title_separator_2); // obsolete: use type 1,2
define('TL_FRMWORKAREA_LEFT_FRAME_WIDTH', $tlCfg->frame_workarea_default_width);
define('TL_TEMP_PATH', $tlCfg->temp_dir);

$tlCfg->gui->title_separator_1 =  $tlCfg->gui_title_separator_1;
$tlCfg->gui->title_separator_2 =  $tlCfg->gui_title_separator_2;
$tlCfg->gui->role_separator_open =  $tlCfg->gui_separator_open;
$tlCfg->gui->role_separator_close = $tlCfg->gui_separator_close;

$tlCfg->gui->version_separator_open =  $tlCfg->gui_separator_open;
$tlCfg->gui->version_separator_close = $tlCfg->gui_separator_close;


/**
 * Globals for Events storage
 */
$g_event_cache = array();

/**
 * Globals for Plugins
 */
$g_plugin_config_cache = array();

// ----- END OF FILE --------------------------------------------------------------------