This is a selection of the parts used to design Music Thing modules
- Download using the Download ZIP button on the right -->
- Copy to your eagle Libraries folder
- Check back for upgrades regularly
- EURO POWER HEADER in three variants
- Regular
- Fat - with larger pads for easier soldering
- Fat Lock - with pads deliberately offset by 10mil to hold the part in place while soldering
- THONKICONN footprint for Thonkiconn 3.5mm sockets
- RESISTOR in three variants
- Vertical
- 7mm - a tight, neat grid. Slightly harder to put the resistors in, but finished boards are more compact
- 10mm a looser grid, slightly scruffy looking boards
- SMALL_DIODE for signal diodes like 1N4148
- VACTROL_4PIN for VTL5C3 and similar vactrols, will also fit the Silonex NSL-32SR3
- VACTROL_5PIN for VTL5C3/2 and similar five pin vactrols
- YAMAICHI_SD_CARD for YAMAICHI PJS008U-3000-0 vertical SD card from Radio Music
- 9MM_SNAP-IN_POT for Alpha vertical pots and similar
- 9MM_SNAP-IN_POT_CHASSIS for Alpha pots, contains a pin for the metal chassis for grounding
- BOURNS_3362P for PCB trimmer used in Radio Music
- D6_PUSH_SWITCH push button Buchla 200e - style switch used in Radio Music (improved footprint with larger pin holes)
- DAC0800 Digital Audio Converter chip used in Turing Machine, DIL and SMD versions
- TL072, TL074 standard dual and quad op amps, DIL and SMD versions
- Mini SPDT small right angle spdt switch like Apem MHSS1105
- ALPHA Illuminated faders in 30 and 20mm
