uptimerobot is a Go library and command-line client for the Uptime Robot website monitoring service. It allows you to search for existing monitors, delete monitors, create new monitors, and also inspect your account details and alert contacts.
To install the client binary, run:
go get -u github.com/bitfield/uptimerobot
To use the client in a Docker container, run:
docker container run bitfield/uptimerobot
To see help on using the client, run:
uptimerobot -h
To use the client with your Uptime Robot account, you will need the Main API Key for the account. Go to the Uptime Robot Settings page and click 'Show/hide it' under the 'Main API Key' section.
There are three ways to pass your API key to the client: in a config file, in an environment variable, or on the command line.
The uptimerobot client will read a config file named .uptimerobot.yaml (or .uptimerobot.json, or any other extension that Viper supports) in your home directory, or in the current directory.
For example, you can put your API key in the file $HOME/.uptimerobot.yaml, and uptimerobot will find and read it automatically (replace XXX with your own API key):
apiKey: XXXuptimerobot will look for the API key in an environment variable named UPTIMEROBOT_API_KEY:
export UPTIMEROBOT_API_KEY=XXX
uptimerobot ...
(For historical reasons, the variable can also be named UPTIMEROBOT_APIKEY.)
You can also pass your API key to the uptimerobot client using the --apiKey flag like this:
uptimerobot --apiKey XXX ...
To test that your API key is correct and uptimerobot is reading it properly, run:
uptimerobot account
You should see your account details listed:
Email: j.random@example.com
Monitor limit: 300
Monitor interval: 1
Up monitors: 208
Down monitors: 2
Paused monitors: 0
If you get an error message, double-check you have the correct API key:
2018/07/12 16:04:26 API error: {
"message": "api_key not found.",
"parameter_name": "api_key",
"passed_value": "XXX",
"type": "invalid_parameter"
}
The uptimerobot contacts command will list your configured alert contacts by ID number:
uptimerobot contacts
ID: 0102759
Name: Jay Random
Type: 2
Status: 2
Value: j.random@example.com
ID: 2053888
Name: Slack
Type: 11
Status: 2
Value: https://hooks.slack.com/services/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
This will be useful when you create a new monitor, because you can add the contact IDs which should be alerted when the check fails (see 'Creating a new monitor' below).
Use uptimerobot search to list all monitors whose 'friendly name' or check URL match a certain string:
uptimerobot search www.example.com
ID: 780689017
Name: Example.com website
URL: https://www.example.com/
Status: Up
Type: HTTP
(Use uptimerobot monitors to list all existing monitors.)
If there are no monitors found matching your search, the exit status of the command will be 1. Otherwise it will be 0. (If you're checking whether a monitor already exists before creating it, try the ensure command instead.)
Note the ID number of the monitor you want to delete, and run uptimerobot delete:
uptimerobot delete 780689017
Monitor ID 780689017 deleted
Note the ID number of the monitor you want to pause, and run uptimerobot pause:
uptimerobot pause 780689017
Monitor ID 780689017 paused
To resume a paused monitor, run uptimerobot start with the monitor ID:
uptimerobot start 780689017
Monitor ID 780689017 started
Run uptimerobot new URL NAME to create a new monitor:
uptimerobot new https://www.example.com/ "Example.com website"
New monitor created with ID 780689018
To create a new monitor with alert contacts configured, use the -c flag followed by a comma-separated list of contact IDs, with no spaces:
uptimerobot new -c 0102759,2053888 https://www.example.com/ "Example.com website"
New monitor created with ID 780689019
Sometimes you want to create a new monitor only if a monitor doesn't already exist for the same URL. This is especially useful in automation.
To do this, run uptimerobot ensure URL NAME:
uptimerobot ensure https://www.example.com/ "Example.com website"
Monitor ID 780689018 ensured
If the monitor doesn't already exist, it will be created.
You can use the -c flag to add alert contacts, just as for the uptimerobot new command.
To see what version of the command-line client you're using, run uptimerobot version.
When things aren't going quite as they should, you can add the --debug flag to your command line to see a dump of the HTTP request and response from the server. This is helpful if you want to report problems with the client, for example.
If the command-line client doesn't do quite what you need, or if you want to use Uptime Robot API access in your own programs, import the library using:
import "github.com/bitfield/uptimerobot/pkg"Create a new Client object by calling uptimerobot.New() with an API key:
client = uptimerobot.New(apiKey)Once you have a client, you can use it to call various Uptime Robot API features:
monitors, err := client.AllMonitors()
if err != nil {
log.Fatal(err)
}
for _, m := range monitors {
fmt.Println(m)
fmt.Println()
}Most API operations use the Monitor struct, which looks like this:
type Monitor struct {
ID int64 `json:"id,omitempty"`
FriendlyName string `json:"friendly_name"`
URL string `json:"url"`
...
}For example, to delete a monitor, find the ID of the monitor you want to delete, and pass it to DeleteMonitor():
if err := client.DeleteMonitor(780689017); err != nil {
log.Fatal(err)
}To call an Uptime Robot API verb not implemented by the uptimerobot library, you can use the MakeAPICall() method directly, passing it some suitable JSON data:
r := uptimerobot.Response{}
data := []byte(fmt.Sprintf("{\"id\": \"%d\"}", m.ID))
if err := client.MakeAPICall("deleteMonitor", &r, data); err != nil {
log.Fatal(err)
}
fmt.Println(r.Monitor.ID)The API response is returned in the Response struct. If the call fails, MakeAPICall() will return the error message. Otherwise, the requested data will be available in the appropriate field of the Response struct:
type Response struct {
Stat string `json:"stat"`
Account Account `json:"account"`
Monitors []Monitor `json:"monitors"`
Monitor Monitor `json:"monitor"`
AlertContacts []AlertContact `json:"alert_contacts"`
Error Error `json:"error"`
}For example, when creating a new monitor, the ID of the created monitor will be returned as r.Monitor.ID.
If things aren't working as you expect, you can use the debug facility to dump the raw request and response data from every API call. To do this, set the environment variable UPTIMEROBOT_DEBUG, which will dump debug information to the standard output, or set client.Debug to any io.Writer to send output to that writer.
Here's an example of the debug output shown when creating a new monitor:
POST /v2/newMonitor HTTP/1.1
Host: api.uptimerobot.com
User-Agent: Go-http-client/1.1
Content-Length: 221
Content-Type: application/json
Accept-Encoding: gzip
{
"alert_contacts": "0335551_0_0-2416450_0_0",
"api_key": "XXX",
"format": "json",
"friendly_name": "Example check",
"port": 443,
"type": 1,
"url": "https://www.example.com"
}
HTTP/2.0 200 OK
Access-Control-Allow-Origin: *
Cf-Ray: 505422654b04dbf3-LHR
Content-Type: application/json; charset=utf-8
Date: Mon, 12 Aug 2019 17:22:57 GMT
Etag: W/"33-NlNt8dOhQvno31TtQYsI0xTJ9w"
Expect-Ct: max-age=604800, report-uri="https://report-uri.cloudflare.com/cdn-cgi/beacon/expect-ct"
Server: cloudflare
Set-Cookie: __cfduid=d9ec99b8a777d9f806956432718fb5c81565630577; expires=Tue, 11-Aug-20 17:22:57 GMT; path=/; domain=.uptimerobot.com; HttpOnly
Vary: Accept-Encoding
{"stat":"ok","monitor":{"id":783263671,"status":1}}If you find a bug in the uptimerobot client or library, please open an issue. Similarly, if you'd like a feature added or improved, let me know via an issue.
Not all the functionality of the Uptime Robot API is implemented yet.
Pull requests welcome!