esp32_idf_camera_app

ESP32 camera firmware that support various camera models

Camera with Web Server

Preparation

To run this example, you need ESP-IDF

Quick Start

After you've completed the hardware settings, please follow the steps below:

1. Connect the camera to ESP32 module;
2. Configure the example through make menuconfig
   or the faster idf.py menuconfig if you are using ESP-IDF v3.2 or above, that support Cmake;
3. Build the applicationmake all or the faster idf.py build;
4. Flash the applicationmake flash or idf.py flash;
5. Open Your Browser and point it to http://[ip-of-esp32]/;
   If you use AP mode, first connect to AccessPoint created by ESP32 then open http://192.168.4.1/;
6. To Get Image press Get Still, Start Stream or Start Stream;
   stream is activated by default on http://192.168.4.1:81/stream
7. Use The Options to enable/disable Face Detection, Face Recognition and more;