By Barak Shoshany
Email: baraksh@gmail.com
Website: https://baraksh.com/
GitHub: https://github.com/bshoshany
This is the complete documentation for v4.1.0 of the library, released on 2024-03-22.
- Introduction
- Getting started
- Submitting tasks to the queue
- Parallelizing loops
- Utility classes
- Managing tasks
- Optional features
- Testing the library
- Installing the library using package managers
- Complete library reference
- About the project
Multithreading is essential for modern high-performance computing. Since C++11, the C++ standard library has included built-in low-level multithreading support using constructs such as std::thread. However, std::thread creates a new thread each time it is called, which can have a significant performance overhead. Furthermore, it is possible to create more threads than the hardware can handle simultaneously, potentially resulting in a substantial slowdown.
The library presented here contains a C++ thread pool class, BS::thread_pool, which avoids these issues by creating a fixed pool of threads once and for all, and then continuously reusing the same threads to perform different tasks throughout the lifetime of the program. By default, the number of threads in the pool is equal to the maximum number of threads that the hardware can run in parallel.
The user submits tasks to be executed into a queue. Whenever a thread becomes available, it retrieves the next task from the queue and executes it. The pool automatically produces an std::future for each task, which allows the user to wait for the task to finish executing and/or obtain its eventual return value, if applicable. Threads and tasks are autonomously managed by the pool in the background, without requiring any input from the user aside from submitting the desired tasks.
The design of this library is guided by four important principles. First, compactness: the entire library consists of just one self-contained header file, with no other components or dependencies, aside from a small self-contained header file with optional utilities. Second, portability: the library only utilizes the C++17 standard library, without relying on any compiler extensions or 3rd-party libraries, and is therefore compatible with any modern standards-conforming C++17 compiler on any platform. Third, ease of use: the library is extensively documented, and programmers of any level should be able to use it right out of the box.
The fourth and final guiding principle is performance: each and every line of code in this library was carefully designed with maximum performance in mind, and performance was tested and verified on a variety of compilers and platforms. Indeed, the library was originally designed for use in the author's own computationally-intensive scientific computing projects, running both on high-end desktop/laptop computers and high-performance computing nodes.
Other, more advanced multithreading libraries may offer more features and/or higher performance. However, they typically consist of a vast codebase with multiple components and dependencies, and involve complex APIs that require a substantial time investment to learn. This library is not intended to replace these more advanced libraries; instead, it was designed for users who don't require very advanced features, and prefer a simple and lightweight library that is easy to learn and use and can be readily incorporated into existing or new projects.
- Fast:
- Built from scratch with maximum performance in mind.
- Suitable for use in high-performance computing nodes with a very large number of CPU cores.
- Compact code, to reduce both compilation time and binary size.
- Reusing threads avoids the overhead of creating and destroying them for individual tasks.
- A task queue ensures that there are never more threads running in parallel than allowed by the hardware.
- Lightweight:
- Single header file: simply
#include "BS_thread_pool.hpp"and you're all set! - Header-only: no need to install or build the library.
- Self-contained: no external requirements or dependencies.
- Portable: uses only the C++ standard library, and works with any C++17-compliant compiler.
- Only 304 lines of code, excluding comments, blank lines, and lines containing only a single brace, with all optional features disabled.
- Only 396 lines of code across both header files with all optional features enabled and including all optional utilities.
- Single header file: simply
- Easy to use:
- Very simple operation, using only a handful of member functions, with additional member functions for more advanced use.
- Every task submitted to the queue using the
submit_task()member function automatically generates anstd::future, which can be used to wait for the task to finish executing and/or obtain its eventual return value. - Loops can be automatically parallelized into any number of tasks using the
submit_loop()member function, which returns aBS::multi_futurethat can be used to track the execution of all parallel tasks at once. - If futures are not needed, tasks may be submitted using
detach_task(), and loops can be parallelized usingdetach_loop()- sacrificing convenience for even greater performance. In that case,wait(),wait_for(), andwait_until()can be used to wait for all the tasks in the queue to complete. - The code is thoroughly documented using Doxygen comments - not only the interface, but also the implementation, in case the user would like to make modifications.
- The included test program
BS_thread_pool_test.cppcan be used to perform exhaustive automated tests and benchmarks, and also serves as a comprehensive example of how to properly use the library. The included PowerShell scriptBS_thread_pool_test.ps1provides a portable way to run the tests with multiple compilers.
- Utility classes:
- The optional header file
BS_thread_pool_utils.hppcontains several useful utility classes. - Send simple signals between threads using the
BS::signallerutility class. - Synchronize output to a stream from multiple threads in parallel using the
BS::synced_streamutility class. - Easily measure execution time for benchmarking purposes using the
BS::timerutility class.
- The optional header file
- Additional features:
- Assign a priority to each task using the optional task priority feature. Tasks with higher priorities will be executed first.
- Submit a sequence of tasks enumerated by indices to the queue using
detach_sequence()andsubmit_sequence(). - Change the number of threads in the pool safely and on-the-fly as needed using the
reset()member function. - Monitor the number of queued and/or running tasks using the
get_tasks_queued(),get_tasks_running(), andget_tasks_total()member functions. - Get the current thread count of the pool using
get_thread_count(). - Freely pause and resume the pool using the
pause(),unpause(), andis_paused()member functions; when paused, threads do not retrieve new tasks out of the queue. - Purge all tasks currently waiting in the queue with the
purge()member function. - Catch exceptions thrown by tasks submitted using
submit_task()orsubmit_loop()from the main thread through their futures. - Run an initialization function in each thread before it starts to execute any submitted tasks.
- Get the pool index of the current thread using
BS::this_thread::get_index()and a pointer to the pool that owns the thread usingBS::this_thread::get_pool(). - Get the unique thread IDs for all threads in the pool using
get_thread_ids()or the implementation-defined thread handles using the optionalget_native_handles()member function. - Submit class member functions to the pool, either applied to a specific object or from within the object itself.
- Pass arguments to tasks by value, reference, or constant reference.
- Under continuous and active development. Bug reports and feature requests are welcome, and should be made via GitHub issues.
This library should successfully compile on any C++17 standard-compliant compiler, on all operating systems and architectures for which such a compiler is available. Compatibility was verified with a 24-core (8P+16E) / 32-thread Intel i9-13900K CPU using the following compilers and platforms:
- Windows 11 build 22631.2861:
- Clang v17.0.6
- GCC v13.2.0 (MSYS2 build)
- MSVC v19.38.33133
- Ubuntu 23.10:
In addition, this library was tested on a Digital Research Alliance of Canada node equipped with two 20-core / 40-thread Intel Xeon Gold 6148 CPUs (for a total of 40 cores and 80 threads), running CentOS Linux 7.9.2009, using GCC v13.2.0.
The test program BS_thread_pool_test.cpp was compiled without warnings (with the warning flags -Wall -Wextra -Wconversion -Wsign-conversion -Wpedantic -Weffc++ -Wshadow in GCC/Clang and /W4 in MSVC), executed, and successfully completed all automated tests and benchmarks using all of the compilers and systems mentioned above.
As this library requires C++17 features, the code must be compiled with C++17 support:
- For Clang or GCC, use the
-std=c++17flag. On Linux, you will also need to use the-pthreadflag to enable the POSIX threads library. - For MSVC, use
/std:c++17, and also/permissive-to ensure standards conformance.
For maximum performance, it is recommended to compile with all available compiler optimizations:
- For Clang or GCC, use the
-O3flag. - For MSVC, use
/O2.
As an example, to compile the test program BS_thread_pool_test.cpp with warnings and optimizations, it is recommended to use the following commands:
- On Linux with GCC:
g++ BS_thread_pool_test.cpp -std=c++17 -O3 -Wall -Wextra -Wconversion -Wsign-conversion -Wpedantic -Weffc++ -Wshadow -pthread -o BS_thread_pool_test - On Linux with Clang: replace
g++withclang++. - On Windows with GCC or Clang: replace
-o BS_thread_pool_testwith-o BS_thread_pool_test.exeand remove-pthread. - On Windows with MSVC:
cl BS_thread_pool_test.cpp /std:c++17 /permissive- /O2 /W4 /EHsc /Fo:BS_thread_pool_test.obj /Fe:BS_thread_pool_test.exe
To install BS::thread_pool, simply download the latest release from the GitHub repository, place the header file BS_thread_pool.hpp from the include folder in the desired folder, and include it in your program:
#include "BS_thread_pool.hpp"The thread pool will now be accessible via the BS::thread_pool class. For an even quicker installation, you can download the header file itself directly at this URL.
This library also comes with an independent utilities header file BS_thread_pool_utils.hpp, which is not required to use the thread pool, but provides some utility classes that may be helpful for multithreading. This header file also resides in the include folder. It can be downloaded directly at this URL.
This library is also available on various package managers and build system, including vcpkg, Conan, Meson, and CMake with CPM. Please see below for more details.
The default constructor creates a thread pool with as many threads as the hardware can handle concurrently, as reported by the implementation via std::thread::hardware_concurrency(). This is usually determined by the number of cores in the CPU. If a core is hyperthreaded, it will count as two threads. For example:
// Constructs a thread pool with as many threads as available in the hardware.
BS::thread_pool pool;Optionally, a number of threads different from the hardware concurrency can be specified as an argument to the constructor. However, note that adding more threads than the hardware can handle will not improve performance, and in fact will most likely hinder it. This option exists in order to allow using less threads than the hardware concurrency, in cases where you wish to leave some threads available for other processes. For example:
// Constructs a thread pool with only 12 threads.
BS::thread_pool pool(12);Usually, when the thread pool is used, a program's main thread should only submit tasks to the thread pool and wait for them to finish, and should not perform any computationally intensive tasks on its own. In that case, it is recommended to use the default value for the number of threads. This ensures that all of the threads available in the hardware will be put to work while the main thread waits.
The member function get_thread_count() returns the number of threads in the pool. This will be equal to std::thread::hardware_concurrency() if the default constructor was used.
It is generally unnecessary to change the number of threads in the pool after it has been created, since the whole point of a thread pool is that you only create the threads once. However, if needed, this can be done, safely and on-the-fly, using the reset() member function.
reset() will wait for all currently running tasks to be completed, but will leave the rest of the tasks in the queue. Then it will destroy the thread pool and create a new one with the desired new number of threads, as specified in the function's argument (or the hardware concurrency if no argument is given). The new thread pool will then resume executing the tasks that remained in the queue and any new submitted tasks.
If desired, the version of this library may be read during compilation time from the following three macros:
BS_THREAD_POOL_VERSION_MAJOR- indicates the major version.BS_THREAD_POOL_VERSION_MINOR- indicates the minor version.BS_THREAD_POOL_VERSION_PATCH- indicates the patch version.
std::cout << "Thread pool library version is " << BS_THREAD_POOL_VERSION_MAJOR << '.' << BS_THREAD_POOL_VERSION_MINOR << '.' << BS_THREAD_POOL_VERSION_PATCH << ".\n";Sample output:
Thread pool library version is 4.1.0.
This can be used, for example, to allow the same code base to work with several incompatible versions of the library using #if directives.
Note: This feature is only available starting with v4.0.1. Earlier releases of this library do not define these macros.
In this section we will learn how to submit a task with no arguments, but potentially with a return value, to the queue. Once a task has been submitted, it will be executed as soon as a thread becomes available. Tasks are executed in the order that they were submitted (first-in, first-out), unless task priority is enabled (see below).
For example, if the pool has 8 threads and an empty queue, and we submitted 16 tasks, then we should expect the first 8 tasks to be executed in parallel, with the remaining tasks being picked up by the threads one by one as each thread finishes executing its first task, until no tasks are left in the queue.
The member function submit_task() is used to submit tasks to the queue. It takes exactly one input, the task to submit. This task must be a function with no arguments, but it can have a return value. The return value is an std::future associated to the task.
If the submitted function has a return value of type T, then the future will be of type std::future<T>, and will be set to the return value when the function finishes its execution. If the submitted function does not have a return value, then the future will be an std::future<void>, which will not return any value but may still be used to wait for the function to finish.
Using auto for the return value of submit_task() means the compiler will automatically detect which instance of the template std::future to use. However, specifying the particular type std::future<T>, as in the examples below, is recommended for increased readability.
To wait until the task finishes, use the member function wait() of the future. To obtain the return value, use the member function get(), which will also automatically wait for the task to finish if it hasn't yet. Here is a simple example:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <future> // std::future
#include <iostream> // std::cout
int the_answer()
{
return 42;
}
int main()
{
BS::thread_pool pool;
std::future<int> my_future = pool.submit_task(the_answer);
std::cout << my_future.get() << '\n';
}In this example we submitted the function the_answer(), which returns an int. The member function submit_task() of the pool therefore returned an std::future<int>. We then used used the get() member function of the future to get the return value, and printed it out.
In addition to submitted a pre-defined function, we can also use a lambda expression to quickly define the task on-the-fly. Rewriting the previous example in terms of a lambda expression, we get:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <future> // std::future
#include <iostream> // std::cout
int main()
{
BS::thread_pool pool;
std::future<int> my_future = pool.submit_task([]{ return 42; });
std::cout << my_future.get() << '\n';
}Here, the lambda expression []{ return 42; } has two parts:
- An empty capture clause, denoted by
[]. This signifies to the compiler that a lambda expression is being defined. - A code block
{ return 42; }that simply returns the value42.
It is generally simpler and faster to submit lambda expressions rather than pre-defined functions, especially due to the ability to capture local variables, which we will discuss in the next section.
Of course, tasks do not have to return values. In the following example, we submit a function with no return value and then using the future to wait for it to finish executing:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <chrono> // std::chrono
#include <future> // std::future
#include <iostream> // std::cout
#include <thread> // std::this_thread
int main()
{
BS::thread_pool pool;
const std::future<void> my_future = pool.submit_task(
[]
{
std::this_thread::sleep_for(std::chrono::milliseconds(500));
});
std::cout << "Waiting for the task to complete... ";
my_future.wait();
std::cout << "Done." << '\n';
}Here we split the lambda into multiple lines to make it more readable. The command std::this_thread::sleep_for(std::chrono::milliseconds(500)) instructs the task to simply sleep for 500 milliseconds, simulating a computationally-intensive task.
As stated in the previous section, tasks submitted using submit_task() cannot have any arguments. However, it is easy to submit tasks with argument either by wrapping the function in a lambda or using lambda captures directly. Here are two examples.
The following is an example of submitting a pre-defined function with arguments by wrapping it with a lambda:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <future> // std::future
#include <iostream> // std::cout
double multiply(const double lhs, const double rhs)
{
return lhs * rhs;
}
int main()
{
BS::thread_pool pool;
std::future<double> my_future = pool.submit_task(
[]
{
return multiply(6, 7);
});
std::cout << my_future.get() << '\n';
}As you can see, to pass the arguments to multiply we simply called multiply(6, 7) explicitly inside a lambda. If the arguments are not literals, we need to use the lambda capture clause to capture the arguments from the local scope:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <future> // std::future
#include <iostream> // std::cout
double multiply(const double lhs, const double rhs)
{
return lhs * rhs;
}
int main()
{
BS::thread_pool pool;
constexpr double first = 6;
constexpr double second = 7;
std::future<double> my_future = pool.submit_task(
[first, second]
{
return multiply(first, second);
});
std::cout << my_future.get() << '\n';
}We could even get rid of the multiply function entirely and put everything inside a lambda, if desired:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <future> // std::future
#include <iostream> // std::cout
int main()
{
BS::thread_pool pool;
constexpr double first = 6;
constexpr double second = 7;
std::future<double> my_future = pool.submit_task(
[first, second]
{
return first * second;
});
std::cout << my_future.get() << '\n';
}Usually, it is best to submit a task to the queue using submit_task(). This allows you to wait for the task to finish and/or get its return value later. However, sometimes a future is not needed, for example when you just want to "set and forget" a certain task, or if the task already communicates with the main thread or with other tasks without using futures, such as via condition variables.
In such cases, you may wish to avoid the overhead involved in assigning a future to the task in order to increase performance. This is called "detaching" the task, as the task detaches from the main thread and runs independently.
Detaching tasks is done using the detach_task() member function, which allows you to detach a task to the queue without generating a future for it. The task can have any number of arguments, but it cannot have a return value, as there would be no way for the main thread to retrieve that value.
Since detach_task() does not return a future, there is no built-in way for the user to know when the task finishes executing. You must manually ensure that the task finishes executing before trying to use anything that depends on its output. Otherwise, bad things will happen!
BS::thread_pool provides the member function wait() to facilitate waiting for all of the tasks in the queue to complete, whether they were detached or submitted with a future. The wait() member function works similarly to the wait() member function of std::future. Consider, for example, the following code:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <chrono> // std::chrono
#include <iostream> // std::cout
#include <thread> // std::this_thread
int main()
{
BS::thread_pool pool;
int result = 0;
pool.detach_task(
[&result]
{
std::this_thread::sleep_for(std::chrono::milliseconds(100));
result = 42;
});
std::cout << result << '\n';
}This program first defines a local variable named result and initializes it to 0. It then detaches a task in the form of a lambda expression. Note that the lambda captures result by reference, as indicated by the & in front of it. This means that the task can modify result, and any such modification will be reflected in the main thread. The task changes result to 42, but it first sleeps for 100 milliseconds. When the main thread prints out the value of result, the task has not yet had time to modify its value, since it is still sleeping. Therefore, the program will print out the initial value 0.
To wait for the task to complete, we must use the wait() member function after detaching it:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <chrono> // std::chrono
#include <iostream> // std::cout
#include <thread> // std::this_thread
int main()
{
BS::thread_pool pool;
int result = 0;
pool.detach_task(
[&result]
{
std::this_thread::sleep_for(std::chrono::milliseconds(100));
result = 42;
});
pool.wait();
std::cout << result << '\n';
}Now the program will print out the value 42, as expected. Note, however, that wait() will wait for all the tasks in the queue, including any other tasks that were potentially submitted before or after the one we care about. If we want to wait for just one task, submit_task() would be a better choice.
Sometimes you may wish to wait for the tasks to complete, but only for a certain amount of time, or until a specific point in time. For example, if the tasks have not yet completed after some time, you may wish to let the user know that there is a delay.
For task submitted with futures using submit_task(), this can be achieved using two member functions of std::future:
wait_for()waits for the task to be completed, but stops waiting after the specified duration, given as an argument of typestd::chrono::duration, has passed.wait_until()waits for the task to be completed, but stops waiting after the specified time point, given as an argument of typestd::chrono::time_point, has been reached.
In both cases, the functions will return future_status::ready if the future is ready, meaning the task is finished and its return value, if any, has been obtained. However, it will return std::future_status::timeout if the future is not yet ready by the time the timeout has expired.
Here is an example:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <chrono> // std::chrono
#include <future> // std::future
#include <iostream> // std::cout
#include <thread> // std::this_thread
int main()
{
BS::thread_pool pool;
const std::future<void> my_future = pool.submit_task(
[]
{
std::this_thread::sleep_for(std::chrono::milliseconds(1000));
std::cout << "Task done!\n";
});
while (true)
{
if (my_future.wait_for(std::chrono::milliseconds(200)) != std::future_status::ready)
std::cout << "Sorry, the task is not done yet.\n";
else
break;
}
}The output should look similar to this:
Sorry, the task is not done yet.
Sorry, the task is not done yet.
Sorry, the task is not done yet.
Sorry, the task is not done yet.
Task done!
For detached tasks, since we do not have a future for them, we cannot use this method. However, BS::thread_pool has two member functions, also named wait_for() and wait_until(), which similarly wait for a specified duration or until a specified time point, but do so for all tasks (whether submitted or detached). Instead of an std::future_status, the thread pool's wait functions returns true if all tasks finished running, or false if the duration expired or the time point was reached but some tasks are still running.
Here is the same example as above, using detach_task() and pool.wait_for():
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <chrono> // std::chrono
#include <iostream> // std::cout
#include <thread> // std::this_thread
int main()
{
BS::thread_pool pool;
pool.detach_task(
[]
{
std::this_thread::sleep_for(std::chrono::milliseconds(1000));
std::cout << "Task done!\n";
});
while (true)
{
if (!pool.wait_for(std::chrono::milliseconds(200)))
std::cout << "Sorry, the task is not done yet.\n";
else
break;
}
}Let us consider the following program:
#include <iostream> // std::cout, std::boolalpha
class flag_class
{
public:
[[nodiscard]] bool get_flag() const
{
return flag;
}
void set_flag(const bool arg)
{
flag = arg;
}
private:
bool flag = false;
};
int main()
{
flag_class flag_object;
flag_object.set_flag(true);
std::cout << std::boolalpha << flag_object.get_flag() << '\n';
}This program creates a new object flag_object of the class flag_class, sets the flag to true using the setter member function set_flag(), and then prints out the flag's value using the getter member function get_flag().
What if we want to submit the member function set_flag() as a task to the thread pool? We simply wrap the entire statement flag_object.set_flag(true); from line in a lambda, and pass flag_object to the lambda by reference, as in this example:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <iostream> // std::cout, std::boolalpha
class flag_class
{
public:
[[nodiscard]] bool get_flag() const
{
return flag;
}
void set_flag(const bool arg)
{
flag = arg;
}
private:
bool flag = false;
};
int main()
{
BS::thread_pool pool;
flag_class flag_object;
pool.submit_task(
[&flag_object]
{
flag_object.set_flag(true);
})
.wait();
std::cout << std::boolalpha << flag_object.get_flag() << '\n';
}Of course, this will also work with detach_task(), if we call wait() on the pool itself instead of on the returned future.
Note that in this example, instead of getting a future from submit_task() and then waiting for that future, we simply called wait() on that future straight away. This is a common way of waiting for a task to complete if we have nothing else to do in the meantime. Note also that we passed flag_object by reference to the lambda, since we want to set the flag on that same object, not a copy of it (passing by value wouldn't have worked anyway, since variables captured by value are implicitly const).
Another thing you might want to do is call a member function from within the object itself, that is, from another member function. This follows a similar syntax, except that you must also capture this (i.e. a pointer to the current object) in the lambda. Here is an example:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <iostream> // std::cout, std::boolalpha
BS::thread_pool pool;
class flag_class
{
public:
[[nodiscard]] bool get_flag() const
{
return flag;
}
void set_flag(const bool arg)
{
flag = arg;
}
void set_flag_to_true()
{
pool.submit_task(
[this]
{
set_flag(true);
})
.wait();
}
private:
bool flag = false;
};
int main()
{
flag_class flag_object;
flag_object.set_flag_to_true();
std::cout << std::boolalpha << flag_object.get_flag() << '\n';
}Note that in this example we defined the thread pool as a global object, so that it is accessible outside the main() function.
One of the most common and effective methods of parallelization is splitting a loop into smaller loops and running them in parallel. It is most effective in "embarrassingly parallel" computations, such as vector or matrix operations, where each iteration of the loop is completely independent of every other iteration.
For example, if we are summing up two vectors of 1000 elements each, and we have 10 threads, we could split the summation into 10 blocks of 100 elements each, and run all the blocks in parallel, potentially increasing performance by up to a factor of 10.
BS::thread_pool can automatically parallelize loops. To see how this works, consider the following generic loop:
for (T i = start; i < end; ++i)
loop(i);where:
Tis any signed or unsigned integer type.- The loop is over the range
[start, end), i.e. inclusive ofstartbut exclusive ofend. loop()is an operation performed for each loop indexi, such as modifying an array withend - startelements.
This loop may be automatically parallelized and submitted to the thread pool's queue using the member function submit_loop(), which has the follows syntax:
pool.submit_loop(start, end, loop, num_blocks);where:
startis the first index in the range.endis the index after the last index in the range, such that the full range is[start, end). In other words, the loop will be equivalent to the one above ifstartandendare the same.startandendmust both be of the same integer typeT. See below for examples of what to do when they are not of the same type.- Note that if
end <= start, nothing will happen.
loop()is the function that should run in every iteration of the loop, and takes one argument, the loop index.num_blocksis the number of blocks of the form[a, b)to split the loop into. For example, if the range is[0, 9)and there are 3 blocks, then the blocks will be the ranges[0, 3),[3, 6), and[6, 9).- The internal algorithm ensures that each of the blocks has one of two sizes, differing by 1, with the larger blocks always first, so that the tasks are as evenly distributed as possible. For example, if the range
[0, 100)is split into 15 blocks, the result will be 10 blocks of size 7, which will be executed first, and 5 blocks of size 6. - This argument can be omitted, in which case the number of blocks will be the number of threads in the pool.
- The internal algorithm ensures that each of the blocks has one of two sizes, differing by 1, with the larger blocks always first, so that the tasks are as evenly distributed as possible. For example, if the range
Each block will be submitted to the thread pool's queue as a separate task. Therefore, a loop that is split into 3 blocks will be split into 3 individual tasks, which may run in parallel. If there is only one block, then the entire loop will run as one task, and no parallelization will take place.
To parallelize the generic loop above, we use the following commands:
BS::multi_future<void> loop_future = pool.submit_loop(start, end, loop, num_blocks);
loop_future.wait();submit_loop() returns an object of the helper class template BS::multi_future. This is essentially a specialization of std::vector<std::future<T>> with additional member functions. Each of the num_blocks blocks will have an std::future assigned to it, and all these futures will be stored inside the returned BS::multi_future. When loop_future.wait() is called, the main thread will wait until all tasks generated by submit_loop() finish executing, and only those tasks - not any other tasks that also happen to be in the queue. This is essentially the role of the BS::multi_future class: to wait for a specific group of tasks, in this case the tasks running the loop blocks.
What value should you use for num_blocks? Omitting this argument, so that the number of blocks will be equal to the number of threads in the pool, is typically a good choice. For best performance, it is recommended to do your own benchmarks to find the optimal number of blocks for each loop (you can use the BS::timer utility class). Using fewer tasks than there are threads may be preferred if you are also running other tasks in parallel. Using more tasks than there are threads may improve performance in some cases, but parallelization with too many tasks will suffer from diminishing returns.
As a simple example, the following code calculates and prints a table of squares of all integers from 0 to 99:
#include <iomanip> // std::setw
#include <iostream> // std::cout
int main()
{
constexpr unsigned int max = 100;
unsigned int squares[max];
for (unsigned int i = 0; i < max; ++i)
squares[i] = i * i;
for (unsigned int i = 0; i < max; ++i)
std::cout << std::setw(2) << i << "^2 = " << std::setw(4) << squares[i] << ((i % 5 != 4) ? " | " : "\n");
}We can parallelize it as follows:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <iomanip> // std::setw
#include <iostream> // std::cout
int main()
{
BS::thread_pool pool(10);
constexpr unsigned int max = 100;
unsigned int squares[max];
const BS::multi_future<void> loop_future = pool.submit_loop<unsigned int>(0, max,
[&squares](const unsigned int i)
{
squares[i] = i * i;
});
loop_future.wait();
for (unsigned int i = 0; i < max; ++i)
std::cout << std::setw(2) << i << "^2 = " << std::setw(4) << squares[i] << ((i % 5 != 4) ? " | " : "\n");
}Since there are 10 threads, and we omitted the num_blocks argument, the loop will be divided into 10 blocks, each calculating 10 squares.
Note that submit_loop() was executed with the explicit template parameter <unsigned int>. The reason is that the two loop indices must be of the same type. However, here max is a unsigned int, while 0 is a (signed) int, so the types do not match, and the code will not compile unless we force the 0 to be of the right type. This can be done most elegantly by specifying the type of the indices explicitly using the template parameter.
The reason this is not done automatically (e.g. using std::common_type is that it may result in accidentally casting negative indices to an unsigned type, or integer indices to a too narrow integer type, which may lead to an incorrect loop range.
We could also cast the 0 explicitly to unsigned int, but that doesn't look as nice:
pool.submit_loop(static_cast<unsigned int>(0), max, /* ... */);Or we could use a C-style cast:
pool.submit_loop((unsigned int)(0), max, /* ... */);Or we could use an integer literal suffix:
pool.submit_loop<size_t>(0U, max, ...);As a side note, notice that here we parallelized the calculation of the squares, but we did not parallelize printing the results. This is for two reasons:
- We want to print out the squares in ascending order, and we have no guarantee that the blocks will be executed in the correct order. This is very important; you must never expect that the parallelized loop will execute at the same order as the non-parallelized loop.
- If we did print out the squares from within the parallel tasks, we would get a huge mess, since all 10 blocks would print to the standard output at once. Later we will see how to synchronize printing to a stream from multiple tasks at the same time.
Just as in the case of detach_task() vs. submit_task(), sometimes you may want to parallelize a loop, but you don't need it to return a BS::multi_future. In this case, you can save the overhead of generating the futures (which can be significant, depending on the number of blocks) by using detach_loop() instead of submit_loop(), with the same arguments.
For example, we could detach the loop of squares example above as follows:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <iomanip> // std::setw
#include <iostream> // std::cout
int main()
{
BS::thread_pool pool(10);
constexpr unsigned int max = 100;
unsigned int squares[max];
pool.detach_loop<unsigned int>(0, max,
[&squares](const unsigned int i)
{
squares[i] = i * i;
});
pool.wait();
for (unsigned int i = 0; i < max; ++i)
std::cout << std::setw(2) << i << "^2 = " << std::setw(4) << squares[i] << ((i % 5 != 4) ? " | " : "\n");
}Warning: Since detach_loop() does not return a BS::multi_future, there is no built-in way for the user to know when the loop finishes executing. You must use either wait() as we did here, or some other method such as condition variables, to ensure that the loop finishes executing before trying to use anything that depends on its output. Otherwise, bad things will happen!
We have seen that detach_loop() and submit_loop() execute the function loop(i) for each index i in the loop. However, behind the scenes, the loop is split into blocks, and each block executes the loop() function multiple times. Each block has an internal loop of the form (where T is the type of the indices):
for (T i = start; i < end; ++i)
loop(i);The start and end indices of each block are determined automatically by the pool. For example, in the previous section, the loop from 0 to 100 was split into 10 blocks of 10 indices each: start = 0 to end = 10, start = 10 to end = 20, and so on; the blocks are not inclusive of the last index, since the for loop has the condition i < end and not i <= end.
However, this also means that the loop() function is executed multiple times per block. This generates additional overhead due to the multiple function calls. For short loops, this should not affect performance. However, for very long loops, with millions of indices, the performance cost may be significate.
For this reason, the thread pool library provides two additional member functions for parallelizing loops: detach_blocks() and submit_blocks(). While detach_loop() and submit_loop() execute a function loop(i) once per index but multiple times per block, detach_blocks() and submit_blocks() execute a function block(start, end) once per block.
The main advantage of this method is increased performance, but the main disadvantage is slightly more complicated code. In particular, the user must define the loop from start to end manually within each block. Here is the previous example using detach_blocks():
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <iomanip> // std::setw
#include <iostream> // std::cout
int main()
{
BS::thread_pool pool(10);
constexpr unsigned int max = 100;
unsigned int squares[max];
pool.detach_blocks<unsigned int>(0, max,
[&squares](const unsigned int start, const unsigned int end)
{
for (unsigned int i = start; i < end; ++i)
squares[i] = i * i;
});
pool.wait();
for (unsigned int i = 0; i < max; ++i)
std::cout << std::setw(2) << i << "^2 = " << std::setw(4) << squares[i] << ((i % 5 != 4) ? " | " : "\n");
}Note how the block function takes two arguments, and includes the internal loop.
Generally, compiler optimizations should be able to make detach_loop() and submit_loop() perform roughly the same as detach_blocks() and submit_blocks(). However, you should perform your own benchmarks to see which option works best for your particular use case.
Unlike submit_task(), the member function submit_loop() only takes loop functions with no return values. The reason is that it wouldn't make sense to return a future for every single index of the loop. However, submit_blocks() does allow the block function to have a return value, as the number of blocks will generally not be too large, unlike the number of indices.
The block function will be executed once for each block, but the blocks are managed by the thread pool, with the user only able to select the number of blocks, but not the range of each block. Therefore, there is limited usability in returning one value per block. However, for cases where this is desired, such as for summation or some sorting algorithms, submit_blocks() does accept functions with return values, in which case it returns a BS::multi_future<T> object where T is the type of the return values.
Here's an example of a function template summing all elements of type T in a given range:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <cstdint> // std::uint64_t
#include <future> // std::future
#include <iostream> // std::cout
BS::thread_pool pool;
template <typename T>
T sum(T min, T max)
{
BS::multi_future<T> loop_future = pool.submit_blocks<T>(
min, max + 1,
[](const T start, const T end)
{
T block_total = 0;
for (T i = start; i < end; ++i)
block_total += i;
return block_total;
},
100);
T result = 0;
for (std::future<T>& future : loop_future)
result += future.get();
return result;
}
int main()
{
std::cout << sum<std::uint64_t>(1, 1'000'000);
}Here we used the fact that BS::multi_future<T> is a specialization of std::vector<std::future<T>>, so we can use a range-based for loop to iterate over the futures, and use the get() member function of each future to get its value. The values of the futures will be the partial sums from each block, so when we add them up, we will get the total sum. Note that we divided the loop into 100 blocks, so there will be 100 futures in total, each with the partial sum of 10,000 numbers.
The range-based for loop will likely start before the loop finished executing, and each time it calls a future, it will get the value of that future if it is ready, or it will wait until the future is ready and then get the value. This increases performance, since we can start summing the results without waiting for the entire loop to finish executing first - we only need to wait for individual blocks.
If we did want to wait until the entire loop finishes before summing the results, we could have used the get() member function of the BS::multi_future<T> object itself, which returns an std::vector<T> with the values obtained from each future. In that case, the sum could be obtained after calling submit_blocks() as follows:
std::vector<T> partial_sums = loop_future.get();
T result = std::reduce(partial_sums.begin(), partial_sums.end());
return result;The member functions detach_loop(), submit_loop(), detach_blocks(), and submit_blocks() parallelize a loop by splitting it into blocks, and submitting each block as an individual task to the queue, with each such task iterating over all the indices in the corresponding block's range, which can be numerous. However, sometimes we have loops with few indices, or more generally, a sequence of tasks enumerated by some index. In such cases, we can avoid the overhead of splitting into blocks and simply submit each individual index as its own independent task to the pool's queue.
This can be done with detach_sequence() and submit_sequence(). The syntax of these functions is similar to detach_loop() and submit_loop(), except that they don't have the num_blocks argument at the end. The sequence function must take only one argument, the index. As usual, detach_sequence() detaches the tasks and does not return a future, while submit_sequence() returns a BS::multi_future. If the tasks in the sequence return values, then the futures will contain those values, otherwise they will be void futures.
Here is a simple example:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <cstdint> // std::uint64_t
#include <iostream> // std::cout
#include <vector> // std::vector
using ui64 = std::uint64_t;
ui64 factorial(const ui64 n)
{
ui64 result = 1;
for (ui64 i = 2; i <= n; ++i)
result *= i;
return result;
}
int main()
{
BS::thread_pool pool;
constexpr ui64 max = 20;
BS::multi_future<ui64> sequence_future = pool.submit_sequence<ui64>(0, max + 1, factorial);
std::vector<ui64> factorials = sequence_future.get();
for (ui64 i = 0; i < max + 1; ++i)
std::cout << i << "! = " << factorials[i] << '\n';
}The helper class template BS::multi_future<T>, which we have been using throughout this section, provides a convenient way to collect and access groups of futures. This class is a specialization of std::vector<T>, so it should be used in a similar way:
- When you create a new object, either use the default constructor to create an empty object and add futures to it later, or pass the desired number of futures to the constructor in advance.
- Use the
[]operator to access the future at a specific index, or thepush_back()member function to append a new future to the list. - The
size()member function tells you how many futures are currently stored in the object.
However, BS::multi_future<T> also has additional member functions that are aimed specifically at handling futures:
- Once all the futures are stored, you can use
wait()to wait for all of them at once orget()to get anstd::vector<T>with the results from all of them. - You can check how many futures are ready using
ready_count(). - You can check if all the stored futures are valid using
valid(). - You can wait for all the stored futures for a specific duration with
wait_for()or wait until a specific time withwait_until(). These functions returntrueif all futures have been waited for before the duration expired or the time point was reached, andfalseotherwise.
Aside from using BS::multi_future<T> to track the execution of parallelized loops, it can also be used, for example, whenever you have several different groups of tasks and you want to track the execution of each group individually.
The optional header file BS_thread_pool_utils.hpp contains several useful utility classes. These are not necessary for using the thread pool itself; BS_thread_pool.hpp is the only header file required. However, the utility classes can make writing multithreading code more convenient.
As with the main header file, the version of the utilities header file can be found by checking three macros:
BS_THREAD_POOL_UTILS_VERSION_MAJOR- indicates the major version.BS_THREAD_POOL_UTILS_VERSION_MINOR- indicates the minor version.BS_THREAD_POOL_UTILS_VERSION_PATCH- indicates the patch version.
When printing to an output stream from multiple threads in parallel, the output may become garbled. For example, consider this code:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <iostream> // std::cout
BS::thread_pool pool;
int main()
{
pool.detach_sequence(0, 5,
[](int i)
{
std::cout << "Task no. " << i << " executing.\n";
});
}The output will be a mess similar to this:
Task no. Task no. Task no. 3 executing.
0 executing.
Task no. 41 executing.
Task no. 2 executing.
executing.
The reason is that, although each individual insertion to std::cout is thread-safe, there is no mechanism in place to ensure subsequent insertions from the same thread are printed contiguously.
The utility class BS::synced_stream is designed to eliminate such synchronization issues. The constructor takes one optional argument, specifying the output stream to print to. If no argument is supplied, std::cout will be used:
// Construct a synced stream that will print to std::cout.
BS::synced_stream sync_out;
// Construct a synced stream that will print to the output stream my_stream.
BS::synced_stream sync_out(my_stream);The member function print() takes an arbitrary number of arguments, which are inserted into the stream one by one, in the order they were given. println() does the same, but also prints a newline character \n at the end, for convenience. A mutex is used to synchronize this process, so that any other calls to print() or println() using the same BS::synced_stream object must wait until the previous call has finished.
As an example, this code:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
BS::synced_stream sync_out;
BS::thread_pool pool;
int main()
{
pool.detach_sequence(0, 5,
[](int i)
{
sync_out.println("Task no. ", i, " executing.");
});
}Will print out:
Task no. 0 executing.
Task no. 1 executing.
Task no. 2 executing.
Task no. 3 executing.
Task no. 4 executing.
Warning: Always create the BS::synced_stream object before the BS::thread_pool object, as we did in this example. When the BS::thread_pool object goes out of scope, it waits for the remaining tasks to be executed. If the BS::synced_stream object goes out of scope before the BS::thread_pool object, then any tasks using the BS::synced_stream will crash. Since objects are destructed in the opposite order of construction, creating the BS::synced_stream object before the BS::thread_pool object ensures that the BS::synced_stream is always available to the tasks, even while the pool is destructing.
Most stream manipulators defined in the headers <ios> and <iomanip>, such as std::setw (set the character width of the next output), std::setprecision (set the precision of floating point numbers), and std::fixed (display floating point numbers with a fixed number of digits), can be passed to print() and println() just as you would pass them to a stream.
The only exceptions are the flushing manipulators std::endl and std::flush, which will not work because the compiler will not be able to figure out which template specializations to use. Instead, use BS::synced_stream::endl and BS::synced_stream::flush. Here is an example:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
#include <cmath> // std::sqrt
#include <iomanip> // std::setprecision, std::setw
#include <ios> // std::fixed
BS::synced_stream sync_out;
BS::thread_pool pool;
int main()
{
sync_out.print(std::setprecision(10), std::fixed);
pool.detach_sequence(0, 16,
[](int i)
{
sync_out.print("The square root of ", std::setw(2), i, " is ", std::sqrt(i), ".", BS::synced_stream::endl);
});
}Note, however, that BS::synced_stream::endl should only be used if flushing is desired; otherwise, a newline character should be used instead.
If you are using a thread pool, then your code is most likely performance-critical. Achieving maximum performance requires performing a considerable amount of benchmarking to determine the optimal settings and algorithms. Therefore, it is important to be able to measure the execution time of various computations and operations under different conditions.
The utility class BS::timer provides a simple way to measure execution time. It is very straightforward to use:
- Create a new
BS::timerobject. - Immediately before you execute the computation that you want to time, call the
start()member function. - Immediately after the computation ends, call the
stop()member function. - Use the member function
ms()to obtain the elapsed time for the computation in milliseconds. - Alternatively, use the member function
current_ms()to obtain the elapsed time so far but keep the timer ticking.
For example:
BS::timer tmr;
tmr.start();
do_something();
tmr.stop();
std::cout << "The elapsed time was " << tmr.ms() << " ms.\n";A practical application of the BS::timer class can be found in the benchmark portion of the test program BS_thread_pool_test.cpp.
BS::signaller is a utility class which can be used to allow simple signalling between threads. To use it, construct an object and then pass it to the different threads. Multiple threads can call the wait() member function of the signaller. When another thread calls the ready() member function, the waiting threads will stop waiting.
That's really all there is to it; BS::signaller is really just a convenient wrapper around std::promise, which contains both the promise and its future. For usage examples, please see the test program BS_thread_pool_test.cpp.
Sometimes you may wish to monitor what is happening with the tasks you submitted to the pool. This may be done using three member functions:
get_tasks_queued()gets the number of tasks currently waiting in the queue to be executed by the threads.get_tasks_running()gets the number of tasks currently being executed by the threads.get_tasks_total()gets the total number of unfinished tasks: either still in the queue, or running in a thread.- Note that
get_tasks_total() == get_tasks_queued() + get_tasks_running().
These functions are demonstrated in the following program:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
#include <chrono> // std::chrono
#include <thread> // std::this_thread
BS::synced_stream sync_out;
BS::thread_pool pool(4);
void sleep_half_second(const int i)
{
std::this_thread::sleep_for(std::chrono::milliseconds(500));
sync_out.println("Task ", i, " done.");
}
void monitor_tasks()
{
sync_out.println(pool.get_tasks_total(), " tasks total, ", pool.get_tasks_running(), " tasks running, ", pool.get_tasks_queued(), " tasks queued.");
}
int main()
{
pool.wait();
pool.detach_sequence(0, 12, sleep_half_second);
monitor_tasks();
std::this_thread::sleep_for(std::chrono::milliseconds(750));
monitor_tasks();
std::this_thread::sleep_for(std::chrono::milliseconds(500));
monitor_tasks();
std::this_thread::sleep_for(std::chrono::milliseconds(500));
monitor_tasks();
}Assuming you have at least 4 hardware threads (so that 4 tasks can run concurrently), the output should be similar to:
12 tasks total, 0 tasks running, 12 tasks queued.
Task 0 done.
Task 1 done.
Task 2 done.
Task 3 done.
8 tasks total, 4 tasks running, 4 tasks queued.
Task 4 done.
Task 5 done.
Task 6 done.
Task 7 done.
4 tasks total, 4 tasks running, 0 tasks queued.
Task 8 done.
Task 9 done.
Task 10 done.
Task 11 done.
0 tasks total, 0 tasks running, 0 tasks queued.
The reason we called pool.wait() in the beginning is that when the thread pool is created, an initialization task runs in each thread, so if we don't wait, the first line will say there are 16 tasks in total, including the 4 initialization tasks. See below for more details.
Consider a situation where the user cancels a multithreaded operation while it is still ongoing. Perhaps the operation was split into multiple tasks, and half of the tasks are currently being executed by the pool's threads, but the other half are still waiting in the queue.
The thread pool cannot terminate the tasks that are already running, as the C++17 standard does not provide that functionality (and in any case, abruptly terminating a task while it's running could have extremely bad consequences, such as memory leaks and data corruption). However, the tasks that are still waiting in the queue can be purged using the purge() member function.
Once purge() is called, any tasks still waiting in the queue will be discarded, and will never be executed by the threads. Please note that there is no way to restore the purged tasks; they are gone forever.
Consider for example the following program:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
#include <chrono> // std::chrono
#include <thread> // std::this_thread
BS::synced_stream sync_out;
BS::thread_pool pool(4);
int main()
{
for (size_t i = 0; i < 8; ++i)
{
pool.detach_task(
[i]
{
std::this_thread::sleep_for(std::chrono::milliseconds(100));
sync_out.println("Task ", i, " done.");
});
}
std::this_thread::sleep_for(std::chrono::milliseconds(50));
pool.purge();
pool.wait();
}The program submit 8 tasks to the queue. Each task waits 100 milliseconds and then prints a message. The thread pool has 4 threads, so it will execute the first 4 tasks in parallel, and then the remaining 4. We wait 50 milliseconds, to ensure that the first 4 tasks have all started running. Then we call purge() to purge the remaining 4 tasks. As a result, these tasks never get executed. However, since the first 4 tasks are still running when purge() is called, they will finish uninterrupted; purge() only discards tasks that have not yet started running. The output of the program therefore only contains the messages from the first 4 tasks:
Task 0 done.
Task 1 done.
Task 2 done.
Task 3 done.
submit_task() catches any exceptions thrown by the submitted task and forwards them to the corresponding future. They can then be caught when invoking the get() member function of the future. For example:
#include "BS_thread_pool.hpp"
BS::synced_stream sync_out;
BS::thread_pool pool;
double inverse(const double x)
{
if (x == 0)
throw std::runtime_error("Division by zero!");
else
return 1 / x;
}
int main()
{
constexpr double num = 0;
std::future<double> my_future = pool.submit_task(inverse, num);
try
{
const double result = my_future.get();
sync_out.println("The inverse of ", num, " is ", result, ".");
}
catch (const std::exception& e)
{
sync_out.println("Caught exception: ", e.what());
}
}The output will be:
Caught exception: Division by zero!
However, if you change num to any non-zero number, no exceptions will be thrown and the inverse will be printed.
It is important to note that wait() does not throw any exceptions; only get() does. Therefore, even if your task does not return anything, i.e. your future is an std::future<void>, you must still use get() on the future obtained from it if you want to catch exceptions thrown by it. Here is an example:
#include "BS_thread_pool.hpp"
BS::synced_stream sync_out;
BS::thread_pool pool;
void print_inverse(const double x)
{
if (x == 0)
throw std::runtime_error("Division by zero!");
else
sync_out.println("The inverse of ", x, " is ", 1 / x, ".");
}
int main()
{
constexpr double num = 0;
std::future<void> my_future = pool.submit_task(print_inverse, num);
try
{
my_future.get();
}
catch (const std::exception& e)
{
sync_out.println("Caught exception: ", e.what());
}
}When using BS::multi_future to handle multiple futures at once, exception handling works the same way: if any of the futures may throw exceptions, you may catch these exceptions when calling get(), even in the case of BS::multi_future<void>.
If you do not require exception handling, or if exceptions are explicitly disabled in your codebase, you can define the macro BS_THREAD_POOL_DISABLE_EXCEPTION_HANDLING before including BS_thread_pool.hpp, which will disable exception handling in submit_task(). Note that if the feature-test macro __cpp_exceptions is undefined, BS_THREAD_POOL_DISABLE_EXCEPTION_HANDLING will be automatically defined.
BS::thread_pool comes with a variety of methods to obtain information about the threads in the pool:
- The namespace
BS::this_threadprovides functionality similar tostd::this_thread. If the current thread belongs to aBS::thread_poolobject, thenBS::this_thread::get_index()can be used to get the index of the current thread, andBS::this_thread::get_pool()can be used to get the pointer to the thread pool that owns the current thread. Please see the reference below for more details. - The member function
get_thread_ids()returns a vector containing the unique identifiers for each of the pool's threads, as obtained bystd::thread::get_id(). These values are not so useful on their own, but can be used for whatever the user wants to use them for. - The optional member function
get_native_handles(), if enabled, returns a vector containing the underlying implementation-defined thread handles for each of the pool's threads, as obtained bystd::thread::native_handle(). For more information, see the relevant section below.
Sometimes, it is necessary to initialize the threads before they run any tasks. This can be done by submitting a proper initialization function to the constructor or to reset(), either as the only argument or as the second argument after the desired number of threads. The thread initialization must take no arguments and have no return value. However, if needed, the function can use BS::this_thread::get_index() and BS::this_thread::get_pool() to figure out which thread and pool it belongs to.
The thread initialization function is submitted as a set of special tasks, one per thread, which bypass the queue, but still count towards the number of running tasks, which means get_tasks_total() and get_tasks_running() will report that these tasks are running if they are checked immediately after the pool is initialized.
This is done so that the user has the option to either wait for the initialization tasks to finish, by calling wait() on the pool, or just keep going. In either case, the initialization tasks will always finish executing before any tasks are picked out of the queue, so there is no reason to wait for them to finish unless they have some side-effects that affect the main thread.
Here is a simple example:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
#include <random> // std::mt19937_64, std::random_device
BS::synced_stream sync_out;
thread_local std::mt19937_64 twister;
int main()
{
BS::thread_pool pool(
[]
{
twister.seed(std::random_device()());
});
pool.submit_sequence(0, 4,
[](int)
{
sync_out.println("I generated a random number: ", twister());
})
.wait();
}In this example, we create a thread_local Mersenne twister engine, meaning that each thread has its own independent engine. However, we did not seed the engine, so each thread will generate the exact same sequence of pseudo-random numbers. To remedy this, we pass an initialization function to the BS::thread_pool constructor which seeds the twister in each thread with the (hopefully) non-deterministic random number generator std::random_device.
In C++, it is often crucial to pass function arguments by reference or constant reference, instead of by value. This allows the function to access the object being passed directly, rather than creating a new copy of the object. We have already seen that submitting an argument by reference is a simple matter of capturing it with a & in the lambda capture list. To submit as constant reference, we can use std::as_const as in the following example:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
#include <utility> // std::as_const
BS::synced_stream sync_out;
void increment(int& x)
{
++x;
}
void print(const int& x)
{
sync_out.println(x);
}
int main()
{
BS::thread_pool pool;
int n = 0;
pool.submit_task(
[&n]
{
increment(n);
})
.wait();
pool.submit_task(
[&n = std::as_const(n)]
{
print(n);
})
.wait();
}The increment() function takes a reference to an integer, and increments that integer. Passing the argument by reference guarantees that n itself, in the scope of main(), will be incremented - rather than a copy of it in the scope of increment().
Similarly, the print() function takes a constant reference to an integer, and prints that integer. Passing the argument by constant reference guarantees that the variable will not be accidentally modified by the function, even though we are accessing n itself, rather than a copy. If we replace print with increment, the program won't compile, as increment cannot take constant references.
Generally, it is not really necessary to pass arguments by constant reference, but it is more "correct" to do so, if we would like to guarantee that the variable being referenced is indeed never modified. This section is therefore included here for completeness.
Sometimes you may wish to temporarily pause the execution of tasks, or perhaps you want to submit tasks to the queue in advance and only start executing them at a later time. You can do this using the member functions pause(), unpause(), and is_paused().
However, these functions are disabled by default, and must be explicitly enabled by defining the macro BS_THREAD_POOL_ENABLE_PAUSE before including BS_thread_pool.hpp. The reason is that pausing the pool adds additional checks to the waiting and worker functions, which have a very small but non-zero overhead.
When you call pause(), the workers will temporarily stop retrieving new tasks out of the queue. However, any tasks already executed will keep running until they are done, since the thread pool has no control over the internal code of your tasks. If you need to pause a task in the middle of its execution, you must do that manually by programming your own pause mechanism into the task itself. To resume retrieving tasks, call unpause(). To check whether the pool is currently paused, call is_paused().
Here is an example:
#define BS_THREAD_POOL_ENABLE_PAUSE
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
#include <chrono> // std::chrono
#include <thread> // std::this_thread
BS::synced_stream sync_out;
BS::thread_pool pool(4);
void sleep_half_second(const int i)
{
std::this_thread::sleep_for(std::chrono::milliseconds(500));
sync_out.println("Task ", i, " done.");
}
void check_if_paused()
{
if (pool.is_paused())
sync_out.println("Pool paused.");
else
sync_out.println("Pool unpaused.");
}
int main()
{
pool.detach_sequence(0, 8, sleep_half_second);
sync_out.println("Submitted 8 tasks.");
std::this_thread::sleep_for(std::chrono::milliseconds(250));
pool.pause();
check_if_paused();
std::this_thread::sleep_for(std::chrono::milliseconds(1000));
sync_out.println("Still paused...");
std::this_thread::sleep_for(std::chrono::milliseconds(1000));
pool.detach_sequence(8, 12, sleep_half_second);
sync_out.println("Submitted 4 more tasks.");
sync_out.println("Still paused...");
std::this_thread::sleep_for(std::chrono::milliseconds(1000));
pool.unpause();
check_if_paused();
}Assuming you have at least 4 hardware threads, the output should be similar to:
Submitted 8 tasks.
Pool paused.
Task 0 done.
Task 1 done.
Task 2 done.
Task 3 done.
Still paused...
Submitted 4 more tasks.
Still paused...
Pool unpaused.
Task 4 done.
Task 5 done.
Task 6 done.
Task 7 done.
Task 8 done.
Task 9 done.
Task 10 done.
Task 11 done.
Here is what happened. We initially submitted a total of 8 tasks to the queue. Since we waited for 250ms before pausing, the first 4 tasks have already started running, so they kept running until they finished. While the pool was paused, we submitted 4 more tasks to the queue, but they just waited at the end of the queue. When we unpaused, the remaining 4 initial tasks were executed, followed by the 4 new tasks.
While the workers are paused, wait() will wait for the running tasks instead of all tasks (otherwise it would wait forever). This is demonstrated by the following program:
#define BS_THREAD_POOL_ENABLE_PAUSE
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
#include <chrono> // std::chrono
#include <thread> // std::this_thread
BS::synced_stream sync_out;
BS::thread_pool pool(4);
void sleep_half_second(const int i)
{
std::this_thread::sleep_for(std::chrono::milliseconds(500));
sync_out.println("Task ", i, " done.");
}
void check_if_paused()
{
if (pool.is_paused())
sync_out.println("Pool paused.");
else
sync_out.println("Pool unpaused.");
}
int main()
{
pool.detach_sequence(0, 8, sleep_half_second);
sync_out.println("Submitted 8 tasks. Waiting for them to complete.");
pool.wait();
pool.detach_sequence(8, 20, sleep_half_second);
sync_out.println("Submitted 12 more tasks.");
std::this_thread::sleep_for(std::chrono::milliseconds(250));
pool.pause();
check_if_paused();
sync_out.println("Waiting for the ", pool.get_tasks_running(), " running tasks to complete.");
pool.wait();
sync_out.println("All running tasks completed. ", pool.get_tasks_queued(), " tasks still queued.");
std::this_thread::sleep_for(std::chrono::milliseconds(1000));
sync_out.println("Still paused...");
std::this_thread::sleep_for(std::chrono::milliseconds(1000));
sync_out.println("Still paused...");
std::this_thread::sleep_for(std::chrono::milliseconds(1000));
pool.unpause();
check_if_paused();
std::this_thread::sleep_for(std::chrono::milliseconds(250));
sync_out.println("Waiting for the remaining ", pool.get_tasks_total(), " tasks (", pool.get_tasks_running(), " running and ", pool.get_tasks_queued(), " queued) to complete.");
pool.wait();
sync_out.println("All tasks completed.");
}The output should be similar to:
Submitted 8 tasks. Waiting for them to complete.
Task 0 done.
Task 1 done.
Task 2 done.
Task 3 done.
Task 4 done.
Task 5 done.
Task 6 done.
Task 7 done.
Submitted 12 more tasks.
Pool paused.
Waiting for the 4 running tasks to complete.
Task 8 done.
Task 9 done.
Task 10 done.
Task 11 done.
All running tasks completed. 8 tasks still queued.
Still paused...
Still paused...
Pool unpaused.
Waiting for the remaining 8 tasks (4 running and 4 queued) to complete.
Task 12 done.
Task 13 done.
Task 14 done.
Task 15 done.
Task 16 done.
Task 17 done.
Task 18 done.
Task 19 done.
All tasks completed.
The first wait(), which was called while the pool was not paused, waited for all 8 tasks, both running and queued. The second wait(), which was called after pausing the pool, only waited for the 4 running tasks, while the other 8 tasks remained queued, and were not executed since the pool was paused. Finally, the third wait(), which was called after unpausing the pool, waited for the remaining 8 tasks, both running and queued.
Warning: If the thread pool is destroyed while paused, any tasks still in the queue will never be executed!
Consider the following program:
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <iostream> // std::cout
int main()
{
BS::thread_pool pool;
pool.detach_task(
[&pool]
{
pool.wait();
std::cout << "Done waiting.\n";
});
}This program creates a thread pool, and then detaches a task that waits for tasks in the same thread pool to complete. If you run this program, it will never print the message "Done waiting", because the task will wait for itself to complete. This causes a deadlock, and the program will wait forever.
Usually, in simple programs, this will never happen. However, in more complicated programs, perhaps ones running multiple thread pools in parallel, wait deadlocks could potentially occur. In such cases, the macro BS_THREAD_POOL_ENABLE_WAIT_DEADLOCK_CHECK can be defined before including BS_thread_pool.hpp. wait() will then check whether the user tried to call it from within a thread of the same pool, and if so, it will throw the exception BS::thread_pool::wait_deadlock instead of waiting. This check is disabled by default because wait deadlocks are not something that happens often, and the check adds a small but non-zero overhead every time wait() is called.
Here is an example:
#define BS_THREAD_POOL_ENABLE_WAIT_DEADLOCK_CHECK
#include "BS_thread_pool.hpp" // BS::thread_pool
#include <iostream> // std::cout
int main()
{
BS::thread_pool pool;
pool.detach_task(
[&pool]
{
try
{
pool.wait();
std::cout << "Done waiting.\n";
}
catch (const BS::thread_pool::wait_deadlock&)
{
std::cout << "Error: Deadlock!\n";
}
});
}This time, wait() will detect the deadlock, and will throw an exception, causing the output to be "Error: Deadlock!".
Note that if the feature-test macro __cpp_exceptions is undefined, BS_THREAD_POOL_ENABLE_WAIT_DEADLOCK_CHECK will be automatically undefined.
The BS::thread_pool member function get_native_handles() returns a vector containing the underlying implementation-defined thread handles for each of the pool's threads. These can then be used in an implementation-specific way to manage the threads at the OS level
However, note that this will generally not be portable code. Furthermore, this feature uses std::thread::native_handle(), which is in the C++ standard library, but is not guaranteed to be present on all systems. Therefore, this feature is turned off by default, and must be turned on by defining the macro BS_THREAD_POOL_ENABLE_NATIVE_HANDLES before including BS_thread_pool.hpp.
Here is an example:
#define BS_THREAD_POOL_ENABLE_NATIVE_HANDLES
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
#include <thread> // std::thread
#include <vector> // std::vector
BS::synced_stream sync_out;
BS::thread_pool pool(4);
int main()
{
std::vector<std::thread::native_handle_type> handles = pool.get_native_handles();
for (BS::concurrency_t i = 0; i < handles.size(); ++i)
sync_out.println("Thread ", i, " native handle: ", handles[i]);
}The output will depend on your compiler and operating system. Here is an example:
Thread 0 native handle: 000000F4
Thread 1 native handle: 000000F8
Thread 2 native handle: 000000EC
Thread 3 native handle: 000000FC
Defining the macro BS_THREAD_POOL_ENABLE_PRIORITY before including BS_thread_pool.hpp enables task priority. The priority of a task or group of tasks may then be specified as an additional argument (at the end of the argument list) to detach_task(), submit_task(), detach_blocks(), submit_blocks(), detach_loop(), submit_loop(), detach_sequence(), and submit_sequence(). If the priority is not specified, the default value will be 0.
The priority is a number of type BS::priority_t, which is a signed 16-bit integer, so it can have any value between -32,768 and 32,767. The tasks will be executed in priority order from highest to lowest. If priority is assigned to the block/loop/sequence parallelization functions, which submit multiple tasks, then all of these tasks will have the same priority.
The namespace BS::pr contains some pre-defined priorities for users who wish to avoid magic numbers and enjoy better future-proofing. In order of decreasing priority, the pre-defined priorities are: BS::pr::highest, BS::pr::high, BS::pr::normal, BS::pr::low, and BS::pr::lowest.
Here is a simple example:
#define BS_THREAD_POOL_ENABLE_PRIORITY
#include "BS_thread_pool.hpp" // BS::thread_pool
#include "BS_thread_pool_utils.hpp" // BS::synced_stream
BS::synced_stream sync_out;
BS::thread_pool pool(1);
int main()
{
pool.detach_task([] { sync_out.println("This task will execute third."); }, BS::pr::normal);
pool.detach_task([] { sync_out.println("This task will execute fifth."); }, BS::pr::lowest);
pool.detach_task([] { sync_out.println("This task will execute second."); }, BS::pr::high);
pool.detach_task([] { sync_out.println("This task will execute first."); }, BS::pr::highest);
pool.detach_task([] { sync_out.println("This task will execute fourth."); }, BS::pr::low);
}This program will print out the tasks in the correct priority order. Note that for simplicity, we used a pool with just one thread, so the tasks will run one at a time. In a pool with 5 or more threads, all 5 tasks will actually run more or less at the same time, because, for example, the task with the second-highest priority will be picked up by another thread while the task with the highest priority is still running.
Of course, this is just a pedagogical example. In a realistic use case we may want, for example, to submit tasks that must be completed immediately with high priority so they skip over other tasks already in the queue, or background non-urgent tasks with low priority so they evaluate only after higher-priority tasks are done.
Here are some subtleties to note when using task priority:
- Task priority is facilitated using
std::priority_queue, which has O(log n) complexity for storing new tasks, but only O(1) complexity for retrieving the next (i.e. highest-priority) task. This is in contrast withstd::queue, used if priority is disabled, which both stores and retrieves with O(1) complexity. - Due to this, enabling the priority queue can incur a very slight decrease in performance, depending on the specific use case, which is why this feature is disabled by default. As usual, there is a trade-off here, where you get functionality in exchange for performance. However, the difference in performance is never substantial, and compiler optimizations can often reduce it to a negligible amount.
- When using the priority queue, tasks will not necessarily be executed in the same order they were submitted, even if they all have the same priority. This is due to the implementation of
std::priority_queueas a binary heap, which means tasks are stored as a binary tree instead of sequentially. To execute tasks in submission order, give them monotonically decreasing priorities. - Technically,
BS::priority_tis defined to be (std::int_least16_t), since this type is guaranteed to be present on all systems, rather thanstd::int16_t, which is optional in the C++ standard. This means that on some exotic systemsBS::priority_tmay actually have more than 16 bits. However, the pre-defined priorities are 100% portable, and will always have the same values (e.g.:BS::pr::highest = 32767) regardless of the actual bit width.
The file BS_thread_pool_test.cpp in the tests folder of the GitHub repository will perform automated tests of all aspects of the library. The output will be printed both to std::cout and to a file with the same name as the executable and the suffix -yyyy-mm-dd_hh.mm.ss.log based on the current date and time. In addition, the code is meant to serve as an extensive example of how to properly use the library.
Please make sure to:
- Compile
BS_thread_pool_test.cppwith optimization flags enabled (e.g.-O3on GCC / Clang or/O2on MSVC). - Run the test without any other applications, especially multithreaded applications, running in parallel.
The test program also takes command line arguments for automation purposes:
help: Show a help message and exit. Any other arguments will be ignored.log: Create a log file.tests: Perform standard tests.deadlockPerform long deadlock tests.benchmarks: Perform benchmarks.
If no options are entered, the default is: log tests benchmarks.
By default, the test program enables all the optional features by defining the suitable macros, so it can test them. However, if the macro BS_THREAD_POOL_LIGHT_TEST is defined during compilation, the optional features will not be tested.
A PowerShell script, BS_thread_pool_test.ps1, is provided for your convenience in the tests folder to make running the test on multiple compilers and operating systems easier. Since it is written in PowerShell, it is fully portable and works on Windows, Linux, and macOS. The script will automatically detect if Clang, GCC, and/or MSVC are available, and compile the test program using each available compiler twice - with and without all the optional features. It will then run each compiled test program and report on any errors.
If any of the tests fail, please submit a bug report including the exact specifications of your system (OS, CPU, compiler, etc.) and the generated log file.
If all checks passed, BS_thread_pool_test.cpp performs simple benchmarks by filling a very large vector with values using detach_blocks(). The program decides what the size of the vector should be by testing how many elements are needed to reach a certain target duration when parallelizing using a number of blocks equal to the number of threads. This ensures that the test takes approximately the same amount of time on all systems, and is thus more consistent and portable.
Once the appropriate size of the vector has been determined, the program allocates the vector and fills it with values, calculated according to a fixed prescription. This operation is performed both single-threaded and multithreaded, with the multithreaded computation spread across multiple tasks submitted to the pool.
Several different multithreaded tests are performed, with the number of tasks either equal to, smaller than, or larger than the pool's thread count. Each test is repeated multiple times, with the run times averaged over all runs of the same test. The program keeps increasing the number of blocks by a factor of 2 until diminishing returns are encountered. The run times of the tests are compared, and the maximum speedup obtained is calculated.
As an example, here are the results of the benchmarks from a Digital Research Alliance of Canada node equipped with two 20-core / 40-thread Intel Xeon Gold 6148 CPUs (for a total of 40 cores and 80 threads), running CentOS Linux 7.9.2009. The tests were compiled using GCC v13.2.0 with the -O3 and -march=native flags. The output was as follows:
======================
Performing benchmarks:
======================
Using 80 threads.
Determining the number of elements to generate in order to achieve an approximate mean execution time of 50 ms with 80 tasks...
Each test will be repeated up to 30 times to collect reliable statistics.
Generating 27962000 elements:
[......]
Single-threaded, mean execution time was 2815.2 ms with standard deviation 3.5 ms.
[......]
With 2 tasks, mean execution time was 1431.3 ms with standard deviation 10.1 ms.
[.......]
With 4 tasks, mean execution time was 722.1 ms with standard deviation 11.4 ms.
[..............]
With 8 tasks, mean execution time was 364.9 ms with standard deviation 10.9 ms.
[............................]
With 16 tasks, mean execution time was 181.9 ms with standard deviation 8.0 ms.
[..............................]
With 32 tasks, mean execution time was 110.6 ms with standard deviation 1.8 ms.
[..............................]
With 64 tasks, mean execution time was 64.0 ms with standard deviation 6.3 ms.
[..............................]
With 128 tasks, mean execution time was 59.8 ms with standard deviation 0.8 ms.
[..............................]
With 256 tasks, mean execution time was 59.0 ms with standard deviation 0.0 ms.
[..............................]
With 512 tasks, mean execution time was 52.8 ms with standard deviation 0.4 ms.
[..............................]
With 1024 tasks, mean execution time was 50.7 ms with standard deviation 0.9 ms.
[..............................]
With 2048 tasks, mean execution time was 50.0 ms with standard deviation 0.5 ms.
[..............................]
With 4096 tasks, mean execution time was 49.4 ms with standard deviation 0.5 ms.
[..............................]
With 8192 tasks, mean execution time was 50.2 ms with standard deviation 0.4 ms.
Maximum speedup obtained by multithreading vs. single-threading: 56.9x, using 4096 tasks.
+++++++++++++++++++++++++++++++++++++++
Thread pool performance test completed!
+++++++++++++++++++++++++++++++++++++++
These two CPUs have 40 physical cores in total, with each core providing two separate logical cores via hyperthreading, for a total of 80 threads. Without hyperthreading, we would expect a maximum theoretical speedup of 40x. With hyperthreading, one might naively expect to achieve up to an 80x speedup, but this is in fact impossible, as each pair of hyperthreaded logical cores share the same physical core's resources. However, generally we would expect at most an estimated 30% additional speedup from hyperthreading, which amounts to around 52x in this case. The speedup of 56.9x in our performance test exceeds this estimate.
If you are using the vcpkg C/C++ package manager, you can easily install BS::thread_pool with the following commands:
On Linux/macOS:
./vcpkg install bshoshany-thread-pool
On Windows:
.\vcpkg install bshoshany-thread-pool:x86-windows bshoshany-thread-pool:x64-windows
To update the package to the latest version, run:
vcpkg upgrade
If you are using the Conan C/C++ package manager, you can easily integrate BS::thread_pool into your project by adding the following lines to your conanfile.txt:
[requires]
bshoshany-thread-pool/4.1.0To update the package to the latest version, simply change the version number. Please refer to this package's page on ConanCenter for more information.
If you are using the Meson build system, you can install BS::thread_pool from WrapDB. To do so, create a subprojects folder in your project (if it does not already exist) and run the following command:
meson wrap install bshoshany-thread-pool
Then, use dependency('bshoshany-thread-pool') in your meson.build file to include the package. To update the package to the latest version, run:
meson wrap update bshoshany-thread-pool
If you are using CMake, you can install BS::thread_pool with CPM. If CPM is already installed, simply add the following to your project's CMakeLists.txt:
CPMAddPackage(
NAME BS_thread_pool
GITHUB_REPOSITORY bshoshany/thread-pool
VERSION 4.1.0)
add_library(BS_thread_pool INTERFACE)
target_include_directories(BS_thread_pool INTERFACE ${BS_thread_pool_SOURCE_DIR}/include)This will automatically download the indicated version of the package from the GitHub repository and include it in your project.
It is also possible to use CPM without installing it first, by adding the following lines to CMakeLists.txt before CPMAddPackage:
set(CPM_DOWNLOAD_LOCATION "${CMAKE_BINARY_DIR}/cmake/CPM.cmake")
if(NOT(EXISTS ${CPM_DOWNLOAD_LOCATION}))
message(STATUS "Downloading CPM.cmake")
file(DOWNLOAD https://github.com/cpm-cmake/CPM.cmake/releases/latest/download/CPM.cmake ${CPM_DOWNLOAD_LOCATION})
endif()
include(${CPM_DOWNLOAD_LOCATION})Here is an example of a complete CMakeLists.txt for a project named my_project consisting of a single source file main.cpp which uses BS_thread_pool.hpp:
cmake_minimum_required(VERSION 3.19)
project(my_project LANGUAGES CXX)
set(CMAKE_CXX_STANDARD 17)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
set(CMAKE_CXX_EXTENSIONS OFF)
set(CPM_DOWNLOAD_LOCATION "${CMAKE_BINARY_DIR}/cmake/CPM.cmake")
if(NOT(EXISTS ${CPM_DOWNLOAD_LOCATION}))
message(STATUS "Downloading CPM.cmake")
file(DOWNLOAD https://github.com/cpm-cmake/CPM.cmake/releases/latest/download/CPM.cmake ${CPM_DOWNLOAD_LOCATION})
endif()
include(${CPM_DOWNLOAD_LOCATION})
CPMAddPackage(
NAME BS_thread_pool
GITHUB_REPOSITORY bshoshany/thread-pool
VERSION 4.1.0)
add_library(BS_thread_pool INTERFACE)
target_include_directories(BS_thread_pool INTERFACE ${BS_thread_pool_SOURCE_DIR}/include)
add_executable(my_project main.cpp)
target_link_libraries(my_project BS_thread_pool)With both CMakeLists.txt and main.cpp in the same folder, type the following commands to build the project:
cmake -S . -B build
cmake --build build
This section provides a complete reference to classes, member functions, objects, and macros available in this library, along with other important information. Member functions are given here with simplified prototypes (e.g. removing const) for ease of reading.
More information can be found in the provided Doxygen comments. Any modern IDE, such as Visual Studio Code, can use the Doxygen comments to provide automatic documentation for any class and member function in this library when hovering over code with the mouse or using auto-complete.
The class BS::thread_pool is the main thread pool class. It can be used to create a pool of threads and submit tasks to a queue. When a thread becomes available, it takes a task from the queue and executes it. The member functions that are available by default, when no macros are defined, are:
- Constructors:
thread_pool(): Construct a new thread pool. The number of threads will be the total number of hardware threads available, as reported by the implementation. This is usually determined by the number of cores in the CPU. If a core is hyperthreaded, it will count as two threads.thread_pool(BS::concurrency_t num_threads): Construct a new thread pool with the specified number of threads.thread_pool(std::function<void()>& init_task): Construct a new thread pool with the specified initialization function.thread_pool(BS::concurrency_t num_threads, std::function<void()>& init_task): Construct a new thread pool with the specified number of threads and initialization function.
- Resetters:
void reset(): Reset the pool with the total number of hardware threads available, as reported by the implementation. Waits for all currently running tasks to be completed, then destroys all threads in the pool and creates a new thread pool with the new number of threads. Any tasks that were waiting in the queue before the pool was reset will then be executed by the new threads. If the pool was paused before resetting it, the new pool will be paused as well.void reset(BS::concurrency_t num_threads): Reset the pool with a new number of threads.void reset(std::function<void()>& init_task)Reset the pool with the total number of hardware threads available, as reported by the implementation, and a new initialization function.void reset(BS::concurrency_t num_threads, std::function<void()>& init_task): Reset the pool with a new number of threads and a new initialization function.
- Getters:
size_t get_tasks_queued(): Get the number of tasks currently waiting in the queue to be executed by the threads.size_t get_tasks_running(): Get the number of tasks currently being executed by the threads.size_t get_tasks_total(): Get the total number of unfinished tasks: either still waiting in the queue, or running in a thread. Note thatget_tasks_total() == get_tasks_queued() + get_tasks_running().BS::concurrency_t get_thread_count(): Get the number of threads in the pool.std::vector<std::thread::id> get_thread_ids(): Get a vector containing the unique identifiers for each of the pool's threads, as obtained bystd::thread::get_id().
- Task submission without futures (
TandFare template parameters):void detach_task(F&& task): Submit a function with no arguments and no return value into the task queue. To push a function with arguments, enclose it in a lambda expression. Does not return a future, so the user must usewait()or some other method to ensure that the task finishes executing, otherwise bad things will happen.void detach_blocks(T first_index, T index_after_last, F&& block, size_t num_blocks = 0): Parallelize a loop by automatically splitting it into blocks and submitting each block separately to the queue. Theblockfunction takes two arguments, the start and end of the block, so that it is only called only once per block, but it is up to the user make sure the block function correctly deals with all the indices in each block. Does not return aBS::multi_future, so the user must usewait()or some other method to ensure that the loop finishes executing, otherwise bad things will happen.void detach_loop(T first_index, T index_after_last, F&& loop, size_t num_blocks = 0): Parallelize a loop by automatically splitting it into blocks and submitting each block separately to the queue. Theloopfunction takes one argument, the loop index, so that it is called many times per block. Does not return aBS::multi_future, so the user must usewait()or some other method to ensure that the loop finishes executing, otherwise bad things will happen.void detach_sequence(T first_index, T index_after_last, F&& sequence): Submit a sequence of tasks enumerated by indices to the queue. Does not return aBS::multi_future, so the user must usewait()or some other method to ensure that the sequence finishes executing, otherwise bad things will happen.
- Task submission with futures (
T,F, andRare template parameters):std::future<R> submit_task(F&& task): Submit a function with no arguments into the task queue. To submit a function with arguments, enclose it in a lambda expression. If the function has a return value, get a future for the eventual returned value. If the function has no return value, get anstd::future<void>which can be used to wait until the task finishes.BS::multi_future<R> submit_blocks(T first_index, T index_after_last, F&& block, size_t num_blocks = 0): Parallelize a loop by automatically splitting it into blocks and submitting each block separately to the queue. Theblockfunction takes two arguments, the start and end of the block, so that it is only called only once per block, but it is up to the user make sure the block function correctly deals with all the indices in each block. Returns aBS::multi_futurethat contains the futures for all of the blocks.BS::multi_future<void> submit_loop(T first_index, T index_after_last, F&& loop, size_t num_blocks = 0): Parallelize a loop by automatically splitting it into blocks and submitting each block separately to the queue. Theloopfunction takes one argument, the loop index, so that it is called many times per block. It must have no return value. Returns aBS::multi_futurethat contains the futures for all of the blocks.BS::multi_future<R> submit_sequence(T first_index, T index_after_last, F&& sequence): Submit a sequence of tasks enumerated by indices to the queue. Returns aBS::multi_futurethat contains the futures for all of the tasks.
- Task management:
void purge(): Purge all the tasks waiting in the queue. Tasks that are currently running will not be affected, but any tasks still waiting in the queue will be discarded, and will never be executed by the threads. Please note that there is no way to restore the purged tasks.
- Waiting for tasks (
RandP,C, andDare template parameters):void wait(): Wait for tasks to be completed. Normally, this function waits for all tasks, both those that are currently running in the threads and those that are still waiting in the queue. However, if the pool is paused, this function only waits for the currently running tasks (otherwise it would wait forever). Note: To wait for just one specific task, usesubmit_task()instead, and call thewait()member function of the generated future.bool wait_for(std::chrono::duration<R, P>& duration): Wait for tasks to be completed, but stop waiting after the specified duration has passed. Returnstrueif all tasks finished running,falseif the duration expired but some tasks are still running.bool wait_until(std::chrono::time_point<C, D>& timeout_time): Wait for tasks to be completed, but stop waiting after the specified time point has been reached. Returnstrueif all tasks finished running,falseif the time point was reached but some tasks are still running.
When a BS::thread_pool object goes out of scope, the destructor first waits for all tasks to complete, then destroys all threads. Note that if the pool is paused, then any tasks still in the queue will never be executed.
The thread pool has several optional features that must be explicitly enabled using macros.
- Task priority: Enabled by defining the macro
BS_THREAD_POOL_ENABLE_PRIORITY.- When enabled, the priority of a task or group of tasks may be specified as an additional argument (at the end of the argument list) to
detach_task(),submit_task(),detach_blocks(),submit_blocks(),detach_loop(),submit_loop(),detach_sequence(), andsubmit_sequence(). If the priority is not specified, the default value will be 0. - The priority is a number of type
BS::priority_t, which is a signed 16-bit integer, so it can have any value between -32,768 and 32,767. The tasks will be executed in priority order from highest to lowest. - The namespace
BS::prcontains some pre-defined priorities:BS::pr::highest,BS::pr::high,BS::pr::normal,BS::pr::low, andBS::pr::lowest.
- When enabled, the priority of a task or group of tasks may be specified as an additional argument (at the end of the argument list) to
- Pausing: Enabled by defining the macro
BS_THREAD_POOL_ENABLE_PAUSE. Adds the following member functions:void pause(): Pause the pool. The workers will temporarily stop retrieving new tasks out of the queue, although any tasks already executed will keep running until they are finished.void unpause(): Unpause the pool. The workers will resume retrieving new tasks out of the queue.bool is_paused(): Check whether the pool is currently paused.
- Getting the native handles of the threads: Enabled by defining the macro
BS_THREAD_POOL_ENABLE_NATIVE_HANDLES. Adds the following member function:std::vector<std::thread::native_handle_type> get_native_handles(): Get a vector containing the underlying implementation-defined thread handles for each of the pool's threads.
- Wait deadlock checks: Enabled by defining the macro
BS_THREAD_POOL_ENABLE_WAIT_DEADLOCK_CHECK.- When enabled,
wait(),wait_for(), andwait_until()will check whether the user tried to call them from within a thread of the same pool, which would result in a deadlock. If so, they will throw the exceptionBS::thread_pool::wait_deadlockinstead of waiting.
- When enabled,
- Disabling exception handling: Achieved by defining the macro
BS_THREAD_POOL_DISABLE_EXCEPTION_HANDLING.- This can be used to disable exception handling in
submit_task()if it is not needed, or if exceptions are explicitly disabled in the codebase. - Note that this macro can be defined independently of
BS_THREAD_POOL_ENABLE_WAIT_DEADLOCK_CHECK. Disabling exception handling removes thetry-catchblock fromsubmit_task(), while enabling wait deadlock checks adds athrowexpression towait(),wait_for(), andwait_until(). - If the feature-test macro
__cpp_exceptionsis undefined,BS_THREAD_POOL_DISABLE_EXCEPTION_HANDLINGis automatically defined, andBS_THREAD_POOL_ENABLE_WAIT_DEADLOCK_CHECKis automatically undefined.
- This can be used to disable exception handling in
The namespace BS::this_thread provides functionality similar to std::this_thread. It contains the following function objects:
BS::this_thread::get_index()can be used to get the index of the current thread. If this thread belongs to aBS::thread_poolobject, it will have an index from 0 toBS::thread_pool::get_thread_count() - 1. Otherwise, for example if this thread is the main thread or an independentstd::thread,std::nulloptwill be returned.BS::this_thread::get_pool()can be used to get the pointer to the thread pool that owns the current thread. If this thread belongs to aBS::thread_poolobject, a pointer to that object will be returned. Otherwise,std::nulloptwill be returned.- In both cases, an
std::optionalobject will be returned, of typeBS::this_thread::optional_indexorBS::this_thread::optional_poolrespectively. Unless you are 100% sure this thread is in a pool, first usestd::optional::has_value()to check if it contains a value, and if so, usestd::optional::value()to obtain that value.
BS::multi_future<T> is a helper class used to facilitate waiting for and/or getting the results of multiple futures at once. It is defined as a specialization of std::vector<std::future<T>>. This means that all of the member functions that can be used on an std::vector can also be used on a BS::multi_future. For example, you may use a range-based for loop with a BS::multi_future, since it has iterators.
In addition to inherited member functions, BS::multi_future has the following specialized member functions (R and P, C, and D are template parameters):
[void or std::vector<T>] get(): Get the results from all the futures stored in thisBS::multi_future, rethrowing any stored exceptions. If the futures returnvoid, this function returnsvoidas well. If the futures return a typeT, this function returns a vector containing the results.size_t ready_count(): Check how many of the futures stored in thisBS::multi_futureare ready.bool valid(): Check if all the futures stored in thisBS::multi_futureare valid.void wait(): Wait for all the futures stored in thisBS::multi_future.bool wait_for(std::chrono::duration<R, P>& duration): Wait for all the futures stored in thisBS::multi_future, but stop waiting after the specified duration has passed. Returnstrueif all futures have been waited for before the duration expired,falseotherwise.bool wait_until(std::chrono::time_point<C, D>& timeout_time): Wait for all the futures stored in thismulti_futureobject, but stop waiting after the specified time point has been reached. Returnstrueif all futures have been waited for before the time point was reached,falseotherwise.
BS::signaller is a utility class which can be used to allow simple signalling between threads. This class is really just a convenient wrapper around std::promise, which contains both the promise and its future. It has the following member functions:
signaller(): Construct a new signaller.void wait(): Wait until the signaller is ready.void ready(): Inform any waiting threads that the signaller is ready.
BS::synced_stream is a utility class which can be used to synchronize printing to an output stream by different threads. It has the following member functions (T is a template parameter pack):
synced_stream(std::ostream& stream = std::cout): Construct a new synced stream which prints to the given output stream.void print(T&&... items): Print any number of items into the output stream. Ensures that no other threads print to this stream simultaneously, as long as they all exclusively use the samesynced_streamobject to print.void println(T&&... items): Print any number of items into the output stream, followed by a newline character.
In addition, the class comes with two stream manipulators, which are meant to help the compiler figure out which template specializations to use with the class:
BS::synced_stream::endl: An explicit cast ofstd::endl. Prints a newline character to the stream, and then flushes it. Should only be used if flushing is desired, otherwise a newline character should be used instead.BS::synced_stream::flush: An explicit cast ofstd::flush. Used to flush the stream.
BS::timer is a utility class which can be used to measure execution time for benchmarking purposes. It has the following member functions:
timer(): Construct a new timer and immediately start measuring time.void start(): Start (or restart) measuring time. Note that the timer starts ticking as soon as the object is created, so this is only necessary if we want to restart the clock later.void stop(): Stop measuring time and store the elapsed time since the object was constructed or sincestart()was last called.std::chrono::milliseconds::rep current_ms(): Get the number of milliseconds that have elapsed since the object was constructed or sincestart()was last called, but keep the timer ticking.std::chrono::milliseconds::rep ms(): Get the number of milliseconds stored whenstop()was last called.
This library is under continuous and active development. If you encounter any bugs, or if you would like to request any additional features, please feel free to open a new issue on GitHub and I will look into it as soon as I can.
Contributions are always welcome. However, I release my projects in cumulative updates after editing and testing them locally on my system, so my policy is not to accept any pull requests. If you open a pull request, and I decide to incorporate your suggestion into the project, I will first modify your code to comply with the project's coding conventions (formatting, syntax, naming, comments, programming practices, etc.), and perform some tests to ensure that the change doesn't break anything. I will then merge it into the next release of the project, possibly together with some other changes. The new release will also include a note in CHANGELOG.md with a link to your pull request, and modifications to the documentation in README.md as needed.
Many GitHub users have helped improve this project, directly or indirectly, via issues, pull requests, comments, and/or personal correspondence. Please see CHANGELOG.md for links to specific issues and pull requests that have been the most helpful. Thank you all for your contribution! :)
If you found this project useful, please consider starring it on GitHub! This allows me to see how many people are using my code, and motivates me to keep working to improve it.
Copyright (c) 2024 Barak Shoshany. Licensed under the MIT license.
If you use this C++ thread pool library in software of any kind, please provide a link to the GitHub repository in the source code and documentation.
If you use this library in published research, please cite it as follows:
- Barak Shoshany, "A C++17 Thread Pool for High-Performance Scientific Computing", doi:10.1016/j.softx.2024.101687, SoftwareX 26 (2024) 101687, arXiv:2105.00613
You can use the following BibTeX entry:
@article{Shoshany2024_ThreadPool,
archiveprefix = {arXiv},
author = {Barak Shoshany},
doi = {10.1016/j.softx.2024.101687},
eprint = {2105.00613},
journal = {SoftwareX},
pages = {101687},
title = {{A C++17 Thread Pool for High-Performance Scientific Computing}},
url = {https://www.sciencedirect.com/science/article/pii/S235271102400058X},
volume = {26},
year = {2024}
}Please note that the papers on SoftwareX and arXiv are not up to date with the latest version of the library. These publications are only intended to facilitate discovery of this library by scientists, and to enable citing it in scientific research. Documentation for the latest version is provided only by the README.md file in the GitHub repository.
Beginner C++ programmers may be interested in my lecture notes for a course taught at McMaster University, which teach modern C and C++ from scratch, including some of the advanced techniques and programming practices used in developing this library.