AdditiveFOAM is a free, open source heat and mass transfer software for simulations of Additive Manufacturing (AM) released by Oak Ridge National Laboratory. It is built upon OpenFOAM, a free, open source computational fluid dynamics (CFD) software package released by the OpenFOAM Foundation.
If you use AdditiveFoam in your work, please cite the source code. Also, please consider citing relevant AdditiveFOAM Publications.
Some select publications using AdditiveFOAM are provided:
- Coleman et al. "Sensitivity of Thermal Predictions to Uncertain Surface Tension Data in Laser Additive Manufacturing", J. Heat Transfer (2020) HT-19-1539
- Knapp et al. "Calibrating uncertain parameters in melt pool simulations of additive manufacturing", Comp. Mat. Sci. (2023) 111904
- Rolchigo et al. "ExaCA: A performance portable exascale cellular automata application for alloy solidification modeling", Comp. Mat. Sci. (2022) 111692
Link | Description |
---|---|
solver | Development version of the solver |
utilities | Utilities for post-processing and code wrappers |
tutorials | Tutorial cases based on NIST AMB2018 single tracks |
AdditiveFOAM is built on source code released by the OpenFOAM Foundation openfoam.org, which is available in public OpenFOAM repositories. The current supported version is OpenFOAM-10.
spack provides a simple way to install AdditiveFOAM. spack develop
is currently required:
spack install additivefoam
Alternatively, a Docker container with pre-built OpenFOAM-10 can be used:
docker pull openfoam/openfoam10-paraview510
docker run -it openfoam/openfoam10-paraview510
or instead OpenFOAM-10 can be compiled from source code following the steps provided by the OpenFOAM Foundation Documentation.
Once OpenFOAM-10 is available on your system, perform the following steps:
-
Clone the AdditiveFOAM repository into the OpenFOAM project installation directory
WM_PROJECT_USER_DIR
:cd $WM_PROJECT_USER_DIR git clone https://github.com/ORNL/AdditiveFOAM.git
If
git
is not available on your system (in the case of the OpenFOAM docker container) you can instead use:wget https://github.com/ORNL/AdditiveFOAM/archive/refs/heads/main.tar.gz mkdir AdditiveFOAM tar xzvf main.tar.gz -C AdditiveFOAM --strip-components=1
-
Build the
movingHeatSource
library and theadditiveFoam
executable:cd $WM_PROJECT_USER_DIR/AdditiveFOAM/applications/solvers/additiveFoam/movingHeatSource wmake libso cd $WM_PROJECT_USER_DIR/AdditiveFOAM/applications/solvers/additiveFoam wmake
To run an AdditiveFOAM simulation, it is recommended to perform the following steps:
-
Prepare the case directory structure using a provided template:
mkdir -p $FOAM_RUN/additivefoam cd $FOAM_RUN/additivefoam cp -r $WM_PROJECT_USER_DIR/AdditiveFOAM/tutorials/AMB2018-02-B userCase cd userCase
-
Modify the necessary input files according to your simulation requirements. These files include:
-
constant/
: Contains configuration and settings that define geometric and material conditions, including:-
transportProperties
: Sets the transport properties of the material. The thermal conductivitykappa
and specific heatCp
are given as temperature dependent second-order polynomials for each phase in the material.The available phases are:
- solid
- liquid
- powder
The remaining properties are all assumed constant throughout the simulation.
-
heatSourceDict
: Defines number, types, and paths of moving heat sources in the simulation.The available heat sources are:
- superGaussian
- modifiedSuperGaussian
The available absorption models are:
- constant
- Kelly
Each heat source model has the ability to be update the depth of the heat source for keyhole modeling, by setting the
transient
flag toTrue
and defining anisoValue
to track the depth of an isotherm contained within the heat source radius. An example of this usage is provided in the multiBeam tutorial.
-
-
0/
: Contains the initial fields. The available fields are provided in the files:T
: temperatureU
: velocityp_rgh
: reduced pressurealpha.solid
: solid volume fractionalpha.powder
: powder volume fraction
-
system/
: Contains simulation configuration files.controlDict
: Set simulation time settings and numerical parameters.fvSchemes
: Set the discretization schemes used to solve the governing equationsfvSolution
: Set solution algorithms and convergence criterias. Note: fluid flow can be turned off by settingnOuterCorrectors
to0
in the PIMPLE dictionary.
-
-
Run the simulation: An example run script which creates a mesh, decomposes the mesh across multiple processors, and runs the AdditiveFOAM case in parallel using MPI is provided in tutorial
Allrun
script. -
Visualize and post-process the results using ParaView
touch case.foam paraview case.foam
AdditiveFOAM supports a scan path file format that decomposes the laser path into segments that are either a) line sources or b) point sources.
Column | Description |
---|---|
Column 1 | mode = 0 for line source, mode = 1 for point source |
Columns 2-4 | (x,y,z) coordinates in meters. For a line (mode = 0), this is the final position of the line raster. For a spot (mode = 1), this is the constant position of the laser |
Column 5 | Value for laser power in watts |
Column 6 | For a line (mode = 0), this is the velocity of the laser in meters/second. For a point (mode = 1), this is the dwell time of the laser in seconds |
One feature of AdditiveFOAM is its ability to export thermal information to ExaCA, a cellular automata (CA) code for grain growth under additive manufacturing conditions. This feature is enabled using the execute
flag in the constant/foamToExaCADict
file. The solidification conditions at the specified isotherm
is tracked in the represenative volume element defined by box
and a resolution defined by dx
. It is recommended to track the liquidus isotherm. Users should be warned that this interpolation may cause a significant load-balancing issues if the resolution of the ExaCA data is much finer than that of the AdditiveFOAM mesh, and therefore, this feature should be used selectively.
AdditiveFOAM is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. See the file LICENSE
in this directory or http://www.gnu.org/licenses/, for a description of the GNU General Public License terms under which you can copy the files.
For any questions, issues, or suggestions regarding AdditiveFOAM, you can reach out to the project maintainers through the GitHub repository's issue tracker or by contacting the development team.
We encourage you to contribute to AdditiveFOAM! Please check the guidelines on how to do so.
We appreciate your interest in AdditiveFOAM and look forward to your contributions!