logi - Logitech R800 to OSC translator

logi intercepts button presses from Logitech R800 remote control and translates them into OSC messages as follows:

Button	OSC message
<	/remote/logitech/r800/press prev
>	/remote/logitech/r800/press next
🞂	/remote/logitech/r800/press start
🞂	/remote/logitech/r800/press stop
⎚	/remote/logitech/r800/press black

NB: On each press the 🞂 button on R800 alternates between the start and the stop commands.

By default logi will send messages to an OSC server on IP address 127.0.0.1 and port 6260. These can be changed with the --address and --port options respectively.

In order to do that, you have to override them in the logi@.service file. For example:

sudo systemctl edit logi@.service

and add the following lines:

[Service]
Environment="args=--address=10.0.42.123 --port=4567"

Share and enjoy.

Installation

Binary

Requires libosc++ >= 1.0.

Debian/Ubuntu/etc:

$ p=logi v=3.2
$ wget https://github.com/dimitry-ishenko-casparcg/${p}/releases/download/v${v}/${p}_${v}_amd64.deb
$ sudo apt install ./${p}_${v}_amd64.deb

RaspberryPi:

$ p=logi v=3.2
$ wget https://github.com/dimitry-ishenko-casparcg/${p}/releases/download/v${v}/${p}_${v}_armhf.deb
$ sudo apt install ./${p}_${v}_armhf.deb

From source

Stable version (requires CMake >= 3.1, asio and libosc++-dev >= 1.0):

$ p=logi v=3.2
$ wget https://github.com/dimitry-ishenko-casparcg/${p}/releases/download/v${v}/${p}-${v}.tar.bz2
$ tar xjf ${p}-${v}.tar.bz2
$ mkdir ${p}-${v}/build
$ cd ${p}-${v}/build
$ cmake ..
$ make
$ sudo make install

Latest master (requires git, CMake >= 3.1, asio and libosc++-dev >= 1.0):

$ p=logi
$ git clone --recursive https://github.com/dimitry-ishenko-casparcg/${p}.git
$ mkdir ${p}/build
$ cd ${p}/build
$ cmake ..
$ make
$ sudo make install

Authors

• Dimitry Ishenko - dimitry (dot) ishenko (at) (gee) mail (dot) com

License

This project is distributed under the GNU GPL license. See the LICENSE.md file for details.