emu8086 and Proteus Temperature Control

In this project, It can be controlled the temperature on any room-place using with emulator 8086. (using Assembly Language and Proteus) . In [23-32] degrees are the control fan motor doesn't working. It works outside[23,32] degrees. Because it is not necesarry, it is good for room temperature from 23 to 32 degrees.

There are few instructions below, they represented project working scheme and screen shots.

Program files and project created with Proteus software and emu8086. They should be installed for execute the files.

Note: I have prepared explanation video to understanding easly of my project https://disk.yandex.com.tr/i/x6q5UAOW2R7MMQ

Note: I have prepared paper with my teammate, you can reach it with below the link https://drive.google.com/file/d/11QLuVCG1ewLyfp19VEWnpBzKTZ1a-hVj/view?usp=sharing

Screenshots

Using & Run

Clone the project

  git clone https://github.com/egemengulpinar/emu8086-Temperature-Control.git

Follow the explanation video, then select same option and setting to execute project.

• Open emu8086 and import temperature.asm file. Save assembly file on emu8086 with .com file format.

• Open Proteus Software and import 17-155-014 temperature control project.pdsprj project file.

• Click 8086 program and select "Edit Component" settings on the Proteus software, open previous .com file and click OK

• Then click start button on project diagram in Proteus Software

• You can change the temperature with CONTROL-TEMPERATURE part.

When the program was executed (if temperature > 33° or temperature < 23°), the control fan motor will working succesfully.