A GPIB client based on KISS principle.
Input an string and press Enter to write it to GPIB device. Press Enter directly (an empty input) to read device's response.
Use -? to get help on command line options.
There are two implementations.
GPIB.c uses NI's classic APIs, ibrd, ibwrt, etc. GCC can be used to build this.
GPIB client command options:
-port as an Erlang port
-board <N> (LAN) board index
-ip 'IP addr' (LAN) IP address string
-name <Name> (LAN) device name
-gpib <N> (GPIB) board handle
-pad <N> (GPIB) primary address
-sad <N> (GPIB) secondery address
-ls list all instruments on a board and quit
-shutup suppress all error/debug prints
-help/-? show this information
GPIB.c uses VISA APIs, viRead, viWrite, etc. GCC can't be used to build this, while VC is OK.
This version supports both GPIB and LAN-GPIB (VXI 11.3).
GPIB client command options:
-port as an Erlang port
-board <N> (LAN) board index
-ip 'IP addr' (LAN) IP address string
-name <Name> (LAN) device name
-gpib <N> (GPIB) board handle
-pad <N> (GPIB) primary address
-sad <N> (GPIB) secondery address
-ls list all instruments on a board and quit
-shutup suppress all error/debug prints
-help/-? show this information
NOTE:
- ./ni: Copyright 2001 National Instruments Corporation
- ./visa: Distributed by IVI Foundation Inc., Contains National Instruments extensions.