This is the main Git repository for the ARC GNU toolchain. It contains documentation & various supplementary materials required for development, verification & releasing of pre-built toolchain artifacts.
Branches in this repository are:
arc-releasesis the stable branch for the toolchain release. Head of this branch is a latest stable release. It is a branch recommended for most usersarc-devis the development branch for the current toolchain release
While the top of development branches should build and run reliably, there
is no guarantee of this. Users who encountered an error are welcomed to create
a new bug report at GitHub Issues for this toolchain project.
There are several documentation sites for ARC GNU toolchain:
- GNU toolchain documentation site - the documentation site for ARC Classic targets.
- ARC-V Processors Getting Started - the documentation for ARC-V targets.
- Old GNU toolchain documentation site - the documentation site for ARC Classic targets for release 2023.03 and earlier.
The toolchain building is being done by Crosstool-NG and so we inherit all the capabilities provided by that powerful and flexible tool. We recommend those interested in rebuilding of ARc GNU tools to become familiar with Crosstool-NG documentation available here: https://crosstool-ng.github.io/docs to better understand its capabilities and limitations. But in a nutshell, when all the environment is set (that's described in details below) what needs to be done is as easy as:
./ct-ng sample_name
./ct-ng buildCrosstool-NG is meant to be used in a Unix-like environment and so the best user experience could be achieved in up-to-date mainstream Linux distributions, which have all needed tools in their repositories.
Also Crosstool-NG is known to work on macOS with Intel processors and hopefully will soon be usable on macOS with ARM processors as well. That said ARC GNU cross-toolchain for macOS might be built natively on macOS. Or it's possible to build it in a canadian cross manner (see https://crosstool-ng.github.io/docs/toolchain-types) on a Linux host with the use of OSXCross as a cross-toolchain for macOS.
There're ways to build ARC GNU cross-toolchain on Windows as well, and the most convenient would be use of Windows Subsystem for Linux v2, WSL2 or any other full-scale virtual machine with Linux inside. Fortunately, though, it's possible to use the canadian-cross approach for Windows as well with use of MinGW cross-toolchain on Linux host. Moreover, even MinGW cross-toolchain might be built with Crosstool-NG right in place, limiting amount of external dependencies.
So our recommendation is to either use a pre-built toolchain for Linux, Windows or macOS (could be found on releases page) or build in a true Linux environment, be it a real Linux host or a virtual machine.
And due to requirements of some toolchain components for building from source as well as for execution of a prebuilt toolchain it's necessary to use up-to-date Linux distribution.
As of today, the oldest supported distributions are:
- CentOS/RHEL 7
- Ubuntu 18.04 LTS
GNU toolchain for ARC has the same standard prerequisites as an upstream GNU toolchain as documented in the GNU toolchain user guide or on the GCC website
Starting from version 2023.03, Crosstool-NG which is used for building toolchains, requires Autoconf 2.71 instead of 2.67. It may not be available on old Linux distributions. In this case you can build it manually (use your own prefix):
wget https://ftp.gnu.org/gnu/autoconf/autoconf-2.71.tar.gz
tar -xf autoconf-2.71.tar.gz
cd autoconf-2.71
./configure --prefix=/tools/autoconf2.71
make
make installThen configure your environment:
export PATH="/tools/autoconf2.71/bin:$PATH"sudo apt update
sudo apt install -y autoconf help2man libtool libtool-bin texinfo byacc flex libncurses5-dev zlib1g-dev \
libexpat1-dev texlive build-essential git wget gawk libncursesw5 \
bison xz-utils make python3 rsync localessudo yum install -y autoconf bison bzip2 file flex gcc-c++ git gperf \
help2man libtool make ncurses-devel patch \
perl-Thread-Queue python3 rsync texinfo unzip wget \
which xzThe latest Crosstool-NG may require building tools newer than tools which are shipped
with CentOS 7 by default (for example, there are GCC 4.8.5 and Make 3.82). At least
it's not enough anymore for building ARC toolchain for Windows hosts. In this
case consider using centos-release-scl repository to install the latest tools:
# Install fresh tools
sudo yum install centos-release-scl
sudo yum install devtoolset-9
# Enable them in a new Bash session
scl enable devtoolset-9 bashSome packages like gperf, help2man & texinfo are not available in a base
package repositories, instead they are distributed via so-called "PowerTools Repository",
to enable it, do the following:
sudo dnf -y install dnf-plugins-core
sudo dnf config-manager --set-enabled powertoolsThen install all the packages in the same way as it is done for Fedora in the next section.
sudo dnf install -y autoconf bison bzip2 diffutils file flex gcc-c++ git \
gperf help2man libtool make ncurses-devel patch \
perl-Thread-Queue python3 rsync texinfo unzip wget \
which xzFor building uClibc it is required to have en_US.UTF-8 locale installed on the
build host (otherwise build fails, for details see #207). In case
en_US.UTF-8 is missing the following needs to be done:
-
Install package with locales. In case of Debian or Debian-based Linux distributions it is
locales. -
Enable & generate
en_US.UTF-8locale# sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen && locale-gen
To simplify toolchain building process we use a powerful, flexible and rather user-friendly tool called "Crosstool-NG. In its nature it's a mixture of Makefiles and bash scripts which hide all the magic & complexity needed to properly configure, build & install all the components of the GNU toolchain.
Still, Crosstool-NG is distributed in sources and needs to be built before use. Though it is as simple as:
# Get the sources
git clone https://github.com/foss-for-synopsys-dwc-arc-processors/crosstool-ng.git
# Step into the just obtained source tree
cd crosstool-ng
# Optionally select its version of choice, for example the one used for creation of `arc-2021.09` release
git checkout arc-2021.09-release
# Configure & build Crosstool-NG
./bootstrap && ./configure --enable-local && makeOnce Crosstool-NG is built and ready for use it's very easy to get a toolchain of choice to be built. One just needs to decide on configuration options to be used for toolchain building or use one of the existing pre-defined settings (which mirror configuration of pre-built toolchains we distribute via https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases).
The following pre-defined configurations (they are called "samples" on Crosstool's parlance) are available at the moment:
snps-arc-arc700-linux-uclibc- Linux uClibc cross-toolchain for ARC700 processors for 64-bit Linux hostssnps-arceb-arc700-linux-uclibc- Linux uClibc cross-toolchain for ARC700 processors (big endian) for 64-bit Linux hostssnps-arc-archs-linux-gnu- Linux glibc cross-toolchain for ARC HS3x & HS4x processors for 64-bit Linux hostssnps-arceb-archs-linux-gnu- Linux glibc cross-toolchain for ARC HS3x & HS4x processors (big endian) for 64-bit Linux hostssnps-arc-archs-linux-uclibc- Linux uClibc cross-toolchain for ARC HS3x & HS4x processors for 64-bit Linux hostssnps-arceb-archs-linux-uclibc- Linux uClibc cross-toolchain for ARC HS3x & HS4x processors (big endian) for 64-bit Linux hostssnps-arc-archs-native-gnu- Linux glibc "native" toolchain from ARC HS3x & ARC HS4x processorssnps-arc-elf32-win- Bare-metal cross-toolchain for wide range of ARCompact & ARCv2 processors (ARC600, ARC700, AEC EM & HS) for 64 -bit Windows hostssnps-arceb-elf32-win- Bare-metal cross-toolchain for wide range of ARCompact & ARCv2 processors (ARC600, ARC700, AEC EM & HS - big endian) for 64 -bit Windows hostssnps-arc-multilib-elf32- Bare-metal cross-toolchain for wide range of ARCompact & ARCv2 processors (ARC600, ARC700, AEC EM & HS) for 64-bit Linux hostssnps-arceb-multilib-elf32- Bare-metal cross-toolchain for wide range of ARCompact & ARCv2 processors (ARC600, ARC700, AEC EM & HS - big endian) for 64-bit Linux hostssnps-arc32-linux-uclibc- Linux uClibc cross-toolchain for ARC HS5x processors for 64-bit Linux hostssnps-arc32-native-uclibc- Linux uClibc "native" toolchain from ARC HS5x processorssnps-arc64-snps-linux-gnu- Linux glibc cross-toolchain for for ARC HS6x processors for 64-bit Linux hostssnps-arc64-snps-native-gnu- Linux glibc "native" toolchain from ARC HS6x processorssnps-arc64-unknown-elf- Bare-metal cross-toolchain for ARC HS6x processors for 64-bit Linux hostssnps-riscv64-unknown-elf- Bare-metal cross-toolchain for ARC-V processors for 64-bit Linux hostssnps-riscv64-win-elf- Bare-metal cross-toolchain for ARC-V processors for 64-bit Windows hosts
And to get Crosstool-NG configured with either of those samples just say: ./ct-ng sample_name. For example, to get bare-metal toolchain for ARCompact/ARCv2 processors say: ./ct-ng snps-arc-multilib-elf32.
⚠️ Please note though, all of these samples are meant to be used for building on a Linux host. And while some samples will work perfectly fine if they are used for Crosstool-NG configuration on say macOS host, those which employ so-called "canadian cross" build methodology (see ifCT_CANADIAN=yis defined in the sample'scrosstool.config) won't work on non-Linux hosts as they use existing cross-toolchain for the target host (MinGW32 if we build a cross-toolchain for Windows hosts or OSXCross if we build for macOS hosts).
If pre-defined "sample" doesn't meet one's requirements, it's possible to either fine-tune some existing sample or start over from scratch
and make all the settings manually. For that just say ./ct-ng menuconfig and use menuconfig interface in the same way as it's done in many other projects like the Linux kernel, uClibc, Buildroot and many others.
⚠️ To start configuration from scratch, make sure.configfile doesn't exist in the Crosstool's root directory or say./ct-ng distclean.
The most interesting options for toolchain users might be:
- Selection of the default target CPU model. To change it go to
Target options -> Emit assembly for CPUand specify one of the possible values for GCC's-mcpuoption (refer to documentation for details). - Selection of ARC64 processors. For that go to
Target options -> Bitnessand select64-bit. CFLAGSto be used for compilation of libraries for the target. Those might be set inTarget options -> Target CFLAGS.
All the information above was on how to get Crosstool-NG prepared for operation and how to get it configured to perform a toolchain build with needed settings. And now, when all the preparations are done, it's required only to start build process with:
./ct-ng build
⚠️ There is set of samples which correspond to native toolchains. Such toolchains are used inside of ARC targets. If you want to build a native toolchain then a corresponding cross-toolchain must be presented inPATH. E.g., if you want to buildsnps-arc64-snps-native-gnusample for a native toolchain then you need to buildsnps-arc64-snps-linux-gnusample for a cross-compiler first and addbindirectory of this cross-compiler toPATH.
To build a toolchain for Windows hosts it is recommended to do a "Canadian cross-compilation" on Linux, that is a toolchain for ARC targets that runs on Windows hosts is built on Linux host. Build scripts expected to be run in Unix-like environment, so it is often faster and easier to build toolchain on Linux, than do this on Windows using environments like Cygwin and MSYS. While those allow toolchain to be built on Windows natively this way is not officially supported and not recommended by Synopsys, due to severe performance penalty of those environments on build time and possible compatibility issue.
Some limitations apply:
- Only bare metal toolchain can be built this way.
- It is required to have toolchain for Linux hosts in the
PATHfor Canadian cross-build to succeed - it will be used to compile standard library of toolchain.
To do a canadian-cross toolchain on Linux, MinGW toolchain must be installed on the build host. There're muliple ways to get MinGW installed:
-
On Ubuntu 18.04 & 20.04 that can be done with:
sudo apt install mingw-w64 -
On CentOS/RHEL 8.x it's a bit more challenging:
sudo dnf -y install dnf-plugins-core sudo dnf config-manager --set-enabled powertools sudo dnf install -y mingw32-gcc
-
Or it could be built with help of that same Crosstool-NG:
./ct-ng x86_64-w64-mingw32 ./ct-ng build
Please note, due to recent changes in Crosstool-NG it's required to
do a tiny change in its configuration to escape a problem of
missing libwinpthread-1.dll, see Crosstool-NG issue #1869
for more details. And required change consists of removal of CT_THREADS_POSIX option,
i.e. in Crosstools-NG's menuconfig deselect it.
Once the MinGW is available on the build host just make sure its binaries
are avaialble via a standard system path, or otherwise add path to them in
local PATH environment variable and use snps-arc-elf32-win sample for
Crosstool-NG configuration.
Alternatively it's possible to start from one of the other existing samples
(for example snps-arc64-unknown-elf) and build it in a canadian cross manner with
the following simple changes.
Run ./ct-ng menuconfig and select CT_CANADIAN=y as well as set
CT_HOST="i686-w64-mingw32".
Then build the toolchain as usual with ./ct-ng build.
In all of the following examples, it is expected that GNU toolchain for ARC has
been added to the user's PATH environment variable. Please note that built toolchain by default gets installed in the current users's ~/x-tools/TOOLCHAIN_TUPLE folder, where TOOLCHAIN_TUPLE is by default dynamically generated based on the toolchain type (bare-metal, glibc or uclibc), CPU's bitness (32- or 64-bit), provided vendor name etc.
For example:
- With
snps-arc-multilib-elf32sample built toolchain will be installed in~/x-tools/arc-snps-elf - With
snps-arc64-unknown-elfsample built toolchain will be installed in~/x-tools/arc64-snps-elf
Prefixes which start with arc- correspond to little endian toolchains. Prefixes which start with
arceb- correspond to big endian toolchains. E.g., GDB for big endian ARCv2 baremetal toolchain is
arceb-elf32-gdb. However, big endian tools are not available for ARCv3 yet.
You can find more information about variants of toolchains, -mcpu values
and matching TCF files on Toolchains for ARC Processors page.
Refer to nSIM page of the documentation for details. Refer to GNU tools for ARC-V for details regarding running ARC-V applications on simulators.
nSIM simulator supports GNU IO hostlink used by the libc library of bare metal
GNU toolchain for ARC. nSIM option nsim_emt=1 enables GNU IO hostlink. nSIM
simulator also supports semihosting, which is essential for ARC-V targets, more
details can be found in nSIM documentation.
To start nSIM in gdbserver mode for ARC EM6:
$ $NSIM_HOME/bin/nsimdrv -gdb -port 51000 \
-tcf $NSIM_HOME/etc/tcf/templates/em6_gp.tcf -on nsim_emtAnd in second console (GDB output is omitted):
$ arc-elf32-gcc -mcpu=arcem -g --specs=nsim.specs hello_world.c
$ arc-elf32-gdb --quiet a.out
(gdb) target remote :51000
(gdb) load
(gdb) break main
(gdb) break exit
(gdb) continue
(gdb) continue
(gdb) quitGDB also might execute commands in a batch mode so that it could be done automatically:
$ arc-elf32-gdb -nx --batch -ex 'target remote :51000' -ex 'load' \
-ex 'break main' -ex 'break exit' \
-ex 'continue' -ex 'continue' -ex 'quit' a.outIf one of the HS TCFs is used, then it is required to add -on nsim_isa_ll64_option to nSIM options, because GCC for ARC automatically
generates double-world memory operations, which are not enabled in TCFs
supplied with nSIM:
$ $NSIM_HOME/bin/nsimdrv -gdb -port 51000 \
-tcf $NSIM_HOME/etc/tcf/templates/hs36.tcf -on nsim_emt \
-on nsim_isa_ll64_optionnSIM distribution doesn't contain big-endian TCFs, so -on nsim_isa_big_endian should be added to nSIM options to simulate big-endian
cores:
$ $NSIM_HOME/bin/nsimdrv -gdb -port 51000 \
-tcf $NSIM_HOME/etc/tcf/templates/em6_gp.tcf -on nsim_emt \
-on nsim_isa_big_endianDefault linker script of GNU Toolchain for ARC is not compatible with memory maps of cores that only has CCM memory (EM4, EM5D, HS34), thus to run application on nSIM with those TCFs it is required to link application with linker script appropriate for selected core.
When application is simulated on nSIM gdbserver all input and output happens on the side of host that runs gdbserver, so in "hello world" example string will be printed in the console that runs nSIM gdbserver.
Note the usage of nsim.specs specification file. This file specifies that
applications should be linked with nSIM IO hostlink library libnsim.a, which is
implemented in libgloss - part of newlib project. libnsim provides several
functions that are required to link C applications - those functions a
considered board/OS specific, hence are not part of the normal libc.a. To link
application without nSIM IO hostlink support use nosys.specs file - note that
in this case system calls are either not available or have stub
implementations. One reason to prefer nsim.specs over nosys.specs even when
developing for hardware platform which doesn't have hostlink support is that
nsim will halt target core on call to function "exit" and on many errors,
while exit functions nosys.specs is an infinite loop. For more details
please see documentation.
Refer to Getting OpenOCD and Using OpenOCD pages of the documentation for details regarding OpenOCD. Refer to Baremetal Targets regarding building and running applications on boards.
To run OpenOCD:
openocd -f board/snps_hsdk.cfgCompile test application and run:
$ arc-elf32-gcc -mcpu=hs38_linux -specs=hsdk.specs -g simple.c
$ arc-elf32-gdb --quiet a.out
(gdb) target remote :3333
(gdb) load
(gdb) break main
(gdb) continue
(gdb) step
(gdb) next
(gdb) break exit
(gdb) continue
(gdb) quitCompile application:
arc-linux-gcc -g -o hello_world hello_world.cCopy it to the NFS share, or place it in rootfs, or make it available to target system in any way other way. Start gdbserver on target system:
[ARCLinux] # gdbserver :51000 hello_worldStart GDB on the host:
$ arc-linux-gdb --quiet hello_world
(gdb) set sysroot <buildroot/output/target>
(gdb) target remote 192.168.218.2:51000
(gdb) break main
(gdb) continue
(gdb) continue
(gdb) quitFor all inquiries Synopsys customers are advised to use SolvNet. Everyone is welcome to open an issue against toolchain repository on GitHub.