Handwritten (long) numbers recognition

Build a Neural Network capable of recognize long handwritten numbers via the use of a webcam.

The aim of this project is to build a CNN model trained on MNIST dataset and to exploit its classification capabilities to recognize a sequence of several single handwritten digits (that can be considered as a long number) given as an input image that the user can take from the webcam.

STRONG ASSUMPTION: the input image must have homogeneous white background, and the digits must be written in dark color (or at least there must be a good constrast between the background and the foreground).

Table of contents

Project description
Download and setup
Usage example
Future developments
Directory structure
Documentation
Info

Project description

Workflow

As the picture shows, the project may be divided into three main phases:

Phase 1: Training of the model
Phase 2: Input image segmentation and digits extraction
Phase 3: Long number recognition

In a nutshell: the CNN model is trained on the MNIST dataset (with data augmentation techniques and without them) in order to obtain a trained model. Once the trained model is ready, it can be fed with the input image (taken from the webcam) which has been preprocessed and segmented accordingly. At this point the model can classify all the single digits written on the input image and returns the whole long number.

Phase 1: Training of the model

This phase takes care of several tasks:

MNIST dataset decoding and management
CNN model implementation
Training of the model

MNIST dataset decoding and management

(a detailed explanation is given here)

The MNIST dataset comes from the original source in the .IDX format which has a particular encoding (well explained in the official website and in the notebook).
Its decoding and management is handled by the modules.dataset module and, in particular by the modules.dataset.MNIST() class, built as follows:

__init__(): class constructor
- downloads the training dataset (train==True) or the test dataset (train==False) if specified (download_dataset==True) and if it is not already downloaded by exploiting the modules.dataset.download() function
- leaves the dataset empty if specified (empty==True) or stores the data and the labels in the corresponding torch.tensor by exploiting the modules.dataset.store_to_tensor() function
set_preprocess(): sets a custom preprocess operation to be applied to each data sample
splits(): splits the dataset according to the provided proportions and returns training and validation sets
- if shuffle==True the dataset is randomly shuffled before being split
get_loader(): returns the torch.utils.data.DataLoader for the current dataset
- provides an iterable over the dataset
- iterates over a number of samples given by batch_size
- exploits a number of workers (num_workers) to load the samples
- if shuffle==True, data is randomly shuffled at every iteration
classes_distribution(): returns the distribution of the classes of the current dataset
statistics(): prints some statistics of the current dataset

CNN model implementation

For the purpose of this project, the network used for the digit recognition task is a Convolutional Neural Network (CNN). The architecture of the model is the one shown below.

The input image (which has a shape of 1x28x28) is fed into the first convolutional layer (having 12 output channels, 5x5 kernel and stride equal to 1), it is then passed through a ReLU function and a max pooling layer (having a 2x2 kernel and a stride equal to 2). This procedure is repeated (the only difference is the number of output channel of the new convolutional layer, which are 24), thus obtaining a 24x4x4 image. A flatten layer is applied, then a linear layer and another ReLu. In order to make the training phase more robust, the dropout technique is used, and another linear layer is applied at the end letting us obtain 10 output neurons of which we take the one having maximum value (softmax is applied).

This entire procedure is handled by the modules.cnn module and, in particular, by the modules.cnn.CNN() class, built as follows:

__init__(): class constructor
- builds the CNN model (the one shown in the figure above)
- moves the model to the selected device (cpu, cuda:0, ...)
- defines the preprocess operation (data_augmentation==True) to be performed on the samples of the dataset while iterating over it or leaves the image

NOTE 1: in this project the data augmentation technique consists of a random rotation (between -30° and +30°), followed by a crop of random scale (between 0.9 and 1.1) and of random ratio (between 3/4 and 4/3) of the original size which is then resized to the original 28x28 size.

NOTE 2: higher degrees of rotation may lead to unwanted behaviours (MNIST is not rotation-invariant: 6 -> 9)

save() and load(): saves and loads, respectively, the classifier's state_dict which maps each layer (having learnable parameters) to its parameters tensor
forward(): computes the output of the network (implicitly builds the computational graph)
- computes the non-normalized output (logits) of the network
- applies the softmax function to the logits, obtaining the normalized (between 0 and 1) output
__decision(): chooses the output neuron having maximum value among all the others (applies argmax)
__loss() function: applies the torch.nn.functional.cross_entropy loss to the output (before softmax)
- a weights tensor is also provided to the function in order to weight the slight unbalance between classes
__performance(): computes the accuracy (correct decisions over all made decisions)
train_cnn(): training procedure
- exploits the get_loader() function to get the DataLoaders of training and validation set with the provided batch_size
- iterates over the epochs and applies the forward() procedure to each mini-batch
- computes the loss and backpropagates it using the backward() method, which stores the gradients for each model parameter (after zeroed them with zero_grad())
- uses Adam optimizer's step() method to update all the (learnable) parameters
- evaluates the performances on the current mini-batch (by first switching off the autograd engine) and accumulates the accuracies and the losses
- save the best model found so far
eval_cnn(): evaluates the accuracy over the provided dataset by forwarding it (batch by batch) through the model and accumulating the accuracies on each mini-batch
classify(): forwards an input sample (or batch of samples) through the model and makes a decision
__plot(): plots the validation and training accuracies over the epochs (used by train_cnn() method)

Training of the model

The training procedure is performed both with data augmentation and without it, by the modules.utils.train() function inside the modules.utils module.

NOTE 1: in this project the data augmentation technique consists of a random rotation (between -30° and +30°), followed by a crop of random scale (between 0.9 and 1.1) and of random ratio (between 3/4 and 4/3) of the original size which is then resized to the original 28x28 size.

NOTE 2: higher degrees of rotation may lead to unwanted behaviours (MNIST is not rotation-invariant: 6 -> 9)

(more details about the usage of the script are provided in usage example)

The script works as follows:

initializes the CNN classifier
prepares the MNIST dataset into training, validation and test sets
trains the classifier by means of the train_cnn() function of the CNN() class

For the training phase, several parameters can be chosen such as:

the splits proportions
the learning rate
the number of epochs
the mini-batch size
the number of workers
the device used

Phase 2: Input image segmentation and digits extraction

This phase takes care of several tasks:

Webcam image capture
Image segmentation
Digits extraction

Webcam capture

This task is performed by the modules.utils.webcam_capture() function inside modules.utils module. It exploits the OpenCV library in the following way:

opens the webcam (cv2.VideoCapture(0))
shows the captured frames in a while loop until:
- SPACE key is pressed: take a snapshot
- ESC key is pressed: close webcam and exit
once the snapshot is taken, it is directly send to the CNN model in order to be classified

Image segmentation

(a detailed explanation is given here)

In this project, the image segmentation task, is computed by exploiting the Graph-based image segmentation algortihm proposed by Felzenszwalb et. al. (paper). In the aforementioned paper and notebook, more details are provided about the algorithm functioning.

This procedure is handled by the modules.segmentation module and, in particular by the module.segmentation.GraphBasedSegmentation() class, built as follows:

__init__(): class contructor
- takes an input image (PIL.Image or numpy.ndarray)
- sets width and height
__preprocessing(): applies preprocessing operations to the input image
- converts it to grayscale
- applies a gaussian blur filter (default radius is 2.3)
- applies a constrast enhancement (default factor is 1.5)
- resizes the image in order to speed the process up (less node in the graph)
__get_diff(): returns the difference (in terms of intensity) between two pixels of an image
__create_edge(): creates the graph edge between two pixels of the image (the associated weight is given by __get_diff())
__threshold(): defines the threshold for a subset of a given cardinality, which will be used in segment() to decide whether to merge two subsets
__build_graph(): builds the graph connecting the pixels (__create_edge()) according to their eight neighbors
__sort(): sorts the edges of the graphs (a.k.a. connection between pixels of the image) according to the connection weights, in non-decreasing order which is what is required by the algorithm
segment(): segment the graph based on the algorithm using some tuning parameters (k and min_size)
- applies the preprocessing operations (if preprocessing==True) to the image
- initializes the disjoint-set forest data structure (see below, DisjointSetForest() class)
- builds the graph (__build_graph()) and sorts it (__sort())
- applies the algorithm by iterating over all the sorted weights and merging the correspondent nodes if they belongs to different components and if the difference between components is greater than the minimum internal difference (__threshold() is used here, along with the tuning parameter k)
- remove components having size less than min_size by merging them with one of the neighbor components
__create_segmented_arr(): creates the array having same shape (height,width) in which each element represents the component the corresponding pixel belogs to
generate_image(): generates the segmented image by giving random colors to the pixels of the various regions (a.k.a. components)
__find_boundaries(): finds the boundaries of the segmented regions by looping over the image array and setting the min_col, min_row, max_col and max_row for each region
digits_boxes_and_areas(): draws the boxes around the segmented regions exploiting the found boundaries and computes the areas of each region
extract_digits(): extract a torch.tensor of the segmented digits (see next step)

The GraphBasedSegmentation() class is based on the modules.segmentation.DisjointSetForest() class, which represents the data-structure used by the algorithm (this class is only used within the GraphBasedSegmentation() class).

Digits extraction

(a detailed explanation is given here)

The digit extraction procedure is carried out by the extract_digits() method of the GraphBasedSegmentation() class.
Once the regions' boundaries are found:

the regions are sliced out from the original image
the slices are resized according to the MNIST dataset samples dimensions (28x28)
the resized slices are modified in order to obtain an image which is as close as possible to the one that the network saw in training phase
the modified slices are converted into a torch.tensor which will be used as input to the network

Phase 3: Long number recognition

This phase, is simpler than the others, and can be split into three steps:

Input of the network: extracted digits
Output of the network: long number
Results

Input of the network: extracted digits

This task is mainly handled by the modules.utils.classify() function inside the modules.utils module. It works as follows:

starts the webcam image capture procedure (if image_path is None) or takes an input image from a folder defined by the user (if image_path is not None)
initializes the CNN classifier
loads the pre-trained model with data augmentation (if augmentation==True) or the one without data augmentation (if augmentation==False) or loads a user-trained model (if model is not None)
segments the image via the segment() method of the GraphBasedSegmentation() class
extracts the digits via the extract_digits() method of the GraphBasedSegmentation() class

Output of the network: long number

As for the previous step, this task is handled by the modules.utils.classify() function.

After the digits have been extracted, they are shown as a batch to the network.
The last step is the following:

classify each single digit exploiting the classify() method of the CNN() class

The result of this procedure is a torch.tensor which stores the recognize number

The recognized number is: 345678

Results

For the training procedure, several models have been tried. In the following table the accuracies for each model are reported:

model	test acc.	validation acc.	training acc.
CNN-128b-60e-0.001l-a	99.03	99.11	99.05
CNN-128b-60e-0.001l	98.80	98.82	99.94
CNN-128b-60e-0.0001l-a	99.49	99.23	99.29
CNN-128b-60e-0.0001l	99.18	98.99	100.0
CNN-128b-60e-0.00001l-a	98.60	98.56	97.80
CNN-128b-60e-0.00001l	98.57	98.36	99.63

As we can see, the models trained with data augmentation techniques show a better behaviour on the test set compared to the ones trained without data augmentation. The latters fit the training set in a better way and that is reasonable since the training phase is less hard with respect to the training phase with augmentation. The choice of the learning rate seems to be in favour of 0.0001, although the model with learning rate of 0.00001 may have performed better if the number of epochs had been greater.

During the recognition task (performed using the CNN-128b-60e-0.0001l-a model), the numbers are generally well classified even if they are presented in diagonal (the random rotation, applied during the training phase, seems to allow us to handle rotated digits), as shown in the figure below.

The recognized number is: 237845

The CNN-128b-60e-0.0001l model, in this case, returns the recognized number: 237868, which is obviously incorrect.

However, the network seems to have some problems recognizing digits such as 1, 7 and 9. In particular (as shown below) the number 9 is usually misclassified as 7 or as 3.

The recognized number is: 7387

The number 1, similarly, is misclassified as 2 or as 7. This is probably due to the fact that the MNIST dataset is mainly based on 1s which are written as vertical lines and which do not have any other traits. In fact, the second 1 of the previous image is similar to the last 7 since they are both composed of two lines.

The recognized number is: 2777

For the latters two cases (in which the numbers are written orizontally), the network trained without data augmentation perform bad as well.

Despite the segmentation and the digits extraction procedure appears to work well, the network still has troubles to correctly classify each number.

In conclusion, the orientation of the digits is well recognized thanks to the data augmentation techniques, while the network could be better trained on the digits in which it perform worse (1, 9 and 7).

Download and Setup

For the execution of this program the following requirements should be ensured:

python 3.8.5
pip 20.0.2
git 2.25.1

I'm not able to guarantee that other versions will work correctly.

The project directory can be downloaded using the following commands in a Linux/MacOS/Windows terminal:

git clone https://github.com/filippoguerranti/handwritten_long_numbers_recognition.git
cd handwritten_long_number_recognition
pip3 install -r requirements.txt

The last command will install all the needed dependencies for this project. Some issues may arise for the OpenCV library. If it happens, please see the note below for more informations.

NOTE: informations about how to install OpenCV in your platform can be found here.

Usage example

Once the repository has been downloaded and all the dependencies have been installed, one can procede with the paths listed here:

Path 1: use the already trained model and start the long number recognition procedure
Path 2: train the model in your machine in order to use this new model as a classifier
Path 3: evaluate the performance of a model on the test set of MNIST

The three path can be taken by using the hlrn.py script, whose behaviour is shown by typing:

$ python3 hlrn.py -h

usage: hlnr.py [-h] {classify,train,eval} ...

Handwritten long number recognition

positional arguments:
  {classify,train,eval}
                        <required> program execution mode: classify with a pre-trained model
                        or re-train the model
    classify            classify an input image using the pre-trained model
    train               re-train the model in your machine and save it to reuse in classify phase
    eval                evaluate the model accuracy on the test set of MNIST

optional arguments:
  -h, --help            show this help message and exit

Path 1: classify

This path allows the recognition of the handwritten digits which can come from either:

an image captured by the user webcam
an image stored in a user-defined folder

Additionaly, one can decide whether to:

use a supplied pre-trained model (which can be found in models folder)
use a model trained by the user (following path 2)

In both cases the models are stored as .pth files having the following notation:

CNN-__b-__e-__l-a.pth (if trained with data augmentation)
CNN-__b-__e-__l.pth (if trained without data augmentation).

The underscores __ are replaced with numbers according to:

b: batch size, e: number of epoch, l: learning rate

Example:
CNN-128b-60e-0.0001l-a.pth represents the model trained with 128 samples per batch, in 60 epochs, with a learning rate of 0.0001 and data augmentation.

The default models will be:

CNN-128b-60e-0.0001l-a (if the user specifies to use the model trained with data augmentation)
CNN-128b-60e-0.0001l (if the user specifies to use the model trained without data augmentation)

Alternatively, one can use its own trained model (which, by default, will be saved in the models folder accordingly with the previous notation).

The following command can be typed into a terminal to show the usage of the classify execution mode:

$ python3 hlnr.py classify -h

usage: hlnr.py classify [-h] [-f PATH_TO_IMAGE] [-a | -m PATH_TO_MODEL] [-d DEVICE]

CLASSIFY mode: classify an input image using a pre-trained model

optional arguments:
  -h, --help            show this help message and exit
  -f PATH_TO_IMAGE, --folder PATH_TO_IMAGE
                        input image from folder, if not specified from webcam
  -a, --augmentation    use model trained WITH data augmentation
  -m PATH_TO_MODEL, --model PATH_TO_MODEL
                        user custom model from path
  -d DEVICE, --device DEVICE
                        (default=cpu) device to be used for computations {cpu, cuda:0, cuda:1, ...}

Adding the ad-hoc arguments, the following solutions are possible:

$ python3 hlnr.py classify

image from: webcam
model: default pre-trained model without data augmentation

$ python3 hlnr.py classify -a

image from: webcam
model: default pre-trained model with data augmentation

$ python3 hlnr.py classify -m PATH_TO_MODEL

image from: webcam
model: user specified pre-trained model (PATH_TO_MODEL)

$ python3 hlnr.py classify -f PATH_TO_IMAGE

image from: user-defined folder (PATH_TO_FOLDER)
model: default pre-trained model without data augmentation

$ python3 hlnr.py classify -a -f PATH_TO_IMAGE

image from: user-defined folder (PATH_TO_FOLDER)
model: default pre-trained model with data augmentation

$ python3 hlnr.py classify -f PATH_TO_MODEL -m PATH_TO_MODEL

image from: user-defined folder (PATH_TO_FOLDER)
model: user specified pre-trained model (PATH_TO_MODEL)

Path 2: train

This path allows the user to train the model in its own machine using the desired parameters. As mentioned in the previous section, the trained model will be save accordingly with the usual notation (here reported):

CNN-__b-__e-__l-a.pth (if trained with data augmentation)
CNN-__b-__e-__l.pth (if trained without data augmentation).

The following command can be typed into a terminal to show the usage of the train execution mode:

$ python3 hlnr.py train -h

usage: hlnr.py train [-h] [-a] [-s TRAIN VAL] [-b BATCH_SIZE] [-e EPOCHS] [-l LEARNING_RATE] [-w NUM_WORKERS]
                     [-d DEVICE]

TRAIN mode: re-train the model in your machine and save it to reuse in classify phase

optional arguments:
  -h, --help            show this help message and exit
  -a, --augmentation    set data-augmentation procedure ON (RandomRotation and RandomResizedCrop)
  -s TRAIN VAL, --splits TRAIN VAL
                        (default=[0.7,0.3]) proportions for the dataset split into training and validation set
  -b BATCH_SIZE, --batch_size BATCH_SIZE
                        (default=64) mini-batch size
  -e EPOCHS, --epochs EPOCHS
                        (default=10) number of training epochs
  -l LEARNING_RATE, --learning_rate LEARNING_RATE
                        (default=10) learning rate
  -w NUM_WORKERS, --num_workers NUM_WORKERS
                        (default=3) number of workers
  -d DEVICE, --device DEVICE
                        (default=cpu) device to be used for computations {cpu, cuda:0, cuda:1, ...}

Adding the ad-hoc arguments, the following solutions are possible:

$ python3 hlnr.py train

data augmentation: false
parameters: default

$ python3 hlnr.py train -a

data augmentation: true
parameters: default

$ python3 hlnr.py train -s 0.8 0.2

data augmentation: false
parameters: splits=[0.8,0.2], others default

$ python3 hlnr.py train -a -e 100

data augmentation: true
parameters: epochs=100, other default

And so on.

Path 3: eval

This path allows the user to evaluate a model over the MNIST test set.

The following command can be typed into a terminal to show the usage of the train execution mode:

$ python3 hlnr.py eval -h

usage: hlnr.py eval [-h] [-d DEVICE] PATH_TO_MODEL

EVAL mode: evaluate the model accuracy on the test set of MNIST

positional arguments:
  PATH_TO_MODEL         <required> path to the model to be evaluated

optional arguments:
  -h, --help            show this help message and exit
  -d DEVICE, --device DEVICE
                        (default=cpu) device to be used for computations {cpu, cuda:0,
                        cuda:1, ...}

One possible usage is the following:

$ python3 hlnr.py eval models/CNN-128b-60e-0.0001l-a.pth: evaluates the performance of the CNN-128b-60e-0.0001l-a model.

Future developments

Enhance modules.segmentation.GraphBasedSegmentation().digits_boxes_and_areas() method to draw rotated boxes around digits which are written in diagonal (to increase the performances in rotated digits)
Train a more robust network in order to better classify 1s, 7s and 9s
Accelerate segmentation procedure
Implement a simple GUI
Implement a second model architecture
Accelerate the modules.dataset.store_file_to_tensor() function
Accelerate the modules.segmentation.GraphBasedSegmentation().__find_boundaries() method

Directory structure

.
├── hlnr.py
├── img
│   ├── cnn-model.png
│   ├── extraction.png
│   ├── graph-based-segmentation.png
│   ├── models-performances.png
│   ├── segmentation.png
│   ├── steps.png
│   ├── training.png
│   ├── webcam
│   │   ├── img-20210114-124240-boxed.png
│   │   ├── img-20210114-124240-digits.png
│   │   ├── img-20210114-124240.png
│   │   ├── img-20210114-124240-segmented.png
│   │   ├── img-20210114-124351-boxed.png
│   │   ├── img-20210114-124351-digits.png
│   │   ├── img-20210114-124351.png
│   │   ├── img-20210114-124351-segmented.png
│   │   ├── img-20210114-124510-boxed.png
│   │   ├── img-20210114-124510-digits.png
│   │   ├── img-20210114-124510.png
│   │   ├── img-20210114-124510-segmented.png
│   │   ├── img-20210114-125102-boxed.png
│   │   ├── img-20210114-125102-digits.png
│   │   ├── img-20210114-125102.png
│   │   ├── img-20210114-125102-segmented.png
│   │   ├── img-20210114-125339-boxed.png
│   │   ├── img-20210114-125339-digits.png
│   │   ├── img-20210114-125339.png
│   │   ├── img-20210114-125339-segmented.png
│   │   ├── img-20210114-125513-boxed.png
│   │   ├── img-20210114-125513-digits.png
│   │   ├── img-20210114-125513.png
│   │   └── img-20210114-125513-segmented.png
│   └── workflow.png
├── __init__.py
├── LICENSE
├── models
│   ├── CNN-128b-60e-0.00001l-a.pth
│   ├── CNN-128b-60e-0.00001l.pth
│   ├── CNN-128b-60e-0.0001l-a.pth
│   ├── CNN-128b-60e-0.0001l.pth
│   ├── CNN-128b-60e-0.001l-a.pth
│   └── CNN-128b-60e-0.001l.pth
├── modules
│   ├── cnn.py
│   ├── dataset.py
│   ├── __init__.py
│   ├── segmentation.py
│   └── utils.py
├── notebooks
│   ├── digits_extraction.ipynb
│   ├── file_decoding_procedure.ipynb
│   └── graph_based_segmentation.ipynb
├── README.md
├── requirements.txt
└── results
    ├── CNN-128b-60e-0.00001l-a-acc.png
    ├── CNN-128b-60e-0.00001l-acc.png
    ├── CNN-128b-60e-0.00001l-a.png
    ├── CNN-128b-60e-0.00001l.png
    ├── CNN-128b-60e-0.0001l-a-acc.png
    ├── CNN-128b-60e-0.0001l-acc.png
    ├── CNN-128b-60e-0.0001l-a.png
    ├── CNN-128b-60e-0.0001l.png
    ├── CNN-128b-60e-0.001l-a-acc.png
    ├── CNN-128b-60e-0.001l-acc.png
    ├── CNN-128b-60e-0.001l-a.png
    └── CNN-128b-60e-0.001l.png

Documentation

Info

Author: Filippo Guerranti filippo.guerranti@student.unisi.it

I am a M.Sc. student in Computer and Automation Engineering at University of Siena, Department of Information Engineering and Mathematical Sciences. This project is inherent the Neural Network course held by prof. Stefano Melacci.

For any suggestion or doubts please contact me by email.

Distributed under the Apache-2.0 License. See LICENSE for more information.

Link to this project: https://github.com/filippoguerranti/handwritten_long_numbers_recognition

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Handwritten (long) numbers recognition

Project description

Phase 1: Training of the model

MNIST dataset decoding and management

CNN model implementation

Training of the model

Phase 2: Input image segmentation and digits extraction

Webcam capture

Image segmentation

Digits extraction

Phase 3: Long number recognition

Input of the network: extracted digits

Output of the network: long number

Results

Download and Setup

Usage example

Path 1: classify

Path 2: train

Path 3: eval

Future developments

Directory structure

Documentation

Info

About

Releases

Packages

Contributors 2

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 318 Commits
img		img
models		models
modules		modules
notebooks		notebooks
results		results
.gitignore		.gitignore
LICENSE		LICENSE
README.md		README.md
__init__.py		__init__.py
hlnr.py		hlnr.py
requirements.txt		requirements.txt
slides-hlnr.pdf		slides-hlnr.pdf

License

guerrantif/handwritten_long_numbers_recognition

Folders and files

Latest commit

History

Repository files navigation

Handwritten (long) numbers recognition

Project description

Phase 1: Training of the model

MNIST dataset decoding and management

CNN model implementation

Training of the model

Phase 2: Input image segmentation and digits extraction

Webcam capture

Image segmentation

Digits extraction

Phase 3: Long number recognition

Input of the network: extracted digits

Output of the network: long number

Results

Download and Setup

Usage example

Path 1: classify

Path 2: train

Path 3: eval

Future developments

Directory structure

Documentation

Info

About

Topics

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Contributors 2

Languages

Packages