New Crowdin updates (#2510)

* New translations troubleshooting-mset9.md (Romanian)

* New translations troubleshooting-mset9.md (French)

* New translations troubleshooting-mset9.md (Spanish)

* New translations troubleshooting-mset9.md (Arabic)

* New translations troubleshooting-mset9.md (Bulgarian)

* New translations troubleshooting-mset9.md (Catalan)

* New translations troubleshooting-mset9.md (Czech)

* New translations troubleshooting-mset9.md (German)

* New translations troubleshooting-mset9.md (Greek)

* New translations troubleshooting-mset9.md (Finnish)

* New translations troubleshooting-mset9.md (Hebrew)

* New translations troubleshooting-mset9.md (Hungarian)

* New translations troubleshooting-mset9.md (Italian)

* New translations troubleshooting-mset9.md (Japanese)

* New translations troubleshooting-mset9.md (Korean)

* New translations troubleshooting-mset9.md (Dutch)

* New translations troubleshooting-mset9.md (Norwegian)

* New translations troubleshooting-mset9.md (Polish)

* New translations troubleshooting-mset9.md (Portuguese)

* New translations troubleshooting-mset9.md (Russian)

* New translations troubleshooting-mset9.md (Swedish)

* New translations troubleshooting-mset9.md (Turkish)

* New translations troubleshooting-mset9.md (Ukrainian)

* New translations troubleshooting-mset9.md (Chinese Simplified)

* New translations troubleshooting-mset9.md (Chinese Traditional)

* New translations troubleshooting-mset9.md (Vietnamese)

* New translations troubleshooting-mset9.md (Portuguese, Brazilian)

* New translations troubleshooting-mset9.md (Indonesian)

* New translations troubleshooting-mset9.md (Thai)

* New translations troubleshooting-mset9.md (Croatian)

* New translations troubleshooting-mset9.md (Malay)

* New translations troubleshooting-mset9.md (Pirate English)

* New translations troubleshooting-mset9.md (Italian)

* New translations troubleshooting-mset9.md (Greek)

* New translations troubleshooting-mset9.md (Hungarian)

* New translations troubleshooting-soundhax.md (Hungarian)

* New translations troubleshooting-ssloth-browser.md (Hungarian)

* New translations troubleshooting-super-skaterhax.md (Hungarian)

* New translations troubleshooting-a9lh-to-b9s.md (Hungarian)

* New translations troubleshooting-ntrboot.md (Hungarian)

* New translations troubleshooting-safecerthax.md (Hungarian)

* New translations troubleshooting-updating-b9s.md (Hungarian)

* New translations troubleshooting-sb9si-firm.md (Hungarian)

* New translations sysupdate.md (French)

* New translations sysupdate.md (Romanian)

* New translations sysupdate.md (Spanish)

* New translations sysupdate.md (Arabic)

* New translations sysupdate.md (Bulgarian)

* New translations sysupdate.md (Catalan)

* New translations sysupdate.md (Czech)

* New translations sysupdate.md (German)

* New translations sysupdate.md (Greek)

* New translations sysupdate.md (Finnish)

* New translations sysupdate.md (Hebrew)

* New translations sysupdate.md (Hungarian)

* New translations sysupdate.md (Italian)

* New translations sysupdate.md (Japanese)

* New translations sysupdate.md (Korean)

* New translations sysupdate.md (Dutch)

* New translations sysupdate.md (Norwegian)

* New translations sysupdate.md (Polish)

* New translations sysupdate.md (Portuguese)

* New translations sysupdate.md (Russian)

* New translations sysupdate.md (Swedish)

* New translations sysupdate.md (Turkish)

* New translations sysupdate.md (Ukrainian)

* New translations sysupdate.md (Chinese Simplified)

* New translations sysupdate.md (Chinese Traditional)

* New translations sysupdate.md (Vietnamese)

* New translations sysupdate.md (Portuguese, Brazilian)

* New translations sysupdate.md (Indonesian)

* New translations sysupdate.md (Thai)

* New translations sysupdate.md (Croatian)

* New translations sysupdate.md (Malay)

* New translations sysupdate.md (Pirate English)

docs/ar_SA/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/ar_SA/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/bg_BG/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/bg_BG/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/ca_ES/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/ca_ES/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/cs_CZ/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/cs_CZ/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/de_DE/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Führe ein System Update durch, indem du zu den Systemeinstellungen gehst, danach "Allgemeine Einstellungen", ganz nach rechts navigierst, und dann "System-Update" auswählst
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/de_DE/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/el_GR/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Ενημερώστε την κονσόλα σας ανοίγοντας την εφαρμογή «System Settings», επιλέγοντας «Other Settings» και τέλος, «System Update» στην τελευταία σελίδα προς τα δεξιά
    - Οι ενημερώσεις είναι ασφαλείς όταν χρησιμοποιείτε B9S + Luma (αυτό που έχετε)
    - Το εργαλείο ενημερώσεων ενδέχεται να εμφανίσει το μήνυμα «Your system is up to date» αντί να κάνει ενημέρωση. Αυτό είναι φυσιολογικό εάν διαθέτετε ήδη την τελευταία έκδοση· συνεχίστε στην επόμενη ενότητα
-   - Εάν λάβετε κάποιο σφάλμα, ορίστε τόσο τις ρυθμίσεις «DNS» όσο και τις ρυθμίσεις «Proxy» σε «Auto»
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - Εάν εξακολουθείτε να λαμβάνετε σφάλμα, [ακολουθήστε αυτόν τον οδηγό επίλυσης προβλημάτων](troubleshooting#finalizing-setup)

docs/el_GR/troubleshooting-mset9.md

@@ -212,7 +212,7 @@
 
 ::: tip
 
-Επιστροφή στην [Εγκατάσταση του boot9strap (MSET-CLI)](installing-boot9strap-\(mset9-cli\))
+Επιστροφή στην [Εγκατάσταση του boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/en_PT/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/en_PT/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/es_ES/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. Esto es esperable si tu consola ya está actualizada; continúa a la siguiente sección
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/es_ES/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/fi_FI/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/fi_FI/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/fr_FR/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. Ceci est normal si vous êtes déjà à jour ; passez à la section suivante.
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/fr_FR/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/he_IL/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/he_IL/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/hr_HR/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/hr_HR/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/hu_HU/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Frissítsd a konzolod következőképp: Lépj be a System Settings-be, majd az "Other settings"-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a "System Update" opciót
    - B9S és Luma használatakor (mint esetedben) biztonságosak a rendszerfrissítések
    - A frissítő elképzelhető, hogy megjeleníti a "Your system is up to date" üzenetet a frissítés helyett. Ez normális, ha már frissítettél; folytasd a következő szakasszal
-   - Ha ez hibát ad, akkor állítsd a DNS és Proxy beállításodat egyaránt "Auto"-ra
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - Ha továbbra is hibát kapsz, [kövesd ezt a hibaelhárítási útmutatót](troubleshooting#finalizing-setup)

docs/hu_HU/_include/troubleshooting-sb9si-firm.md

@@ -2,6 +2,6 @@
 
 :::details Failed to open SafeB9SInstaller.firm
 
-The file `SafeB9SInstaller.firm` is missing or misplaced. Download the latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip), extract it, and place `SafeB9SInstaller.firm` on the root of your SD card. Do not add the `.firm` extension if you do not already see it.
+A `SafeB9SInstaller.firm` fájl hiányzik, vagy rossz helyen van. Töltsd le a legutolsó kiadását az [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip)-nek, csomagold ki és rakd a `SafeB9SInstaller.firm` fájlt az SD kártyád gyökerébe. Ne add hozzá a `.firm` kiterjesztést, ha nem látod.
 
 :::

docs/hu_HU/troubleshooting-a9lh-to-b9s.md

@@ -2,7 +2,7 @@
 
 Ez az oldal hibaelhárítási tanácsokat ad sűrűn előforduló problémákhoz a "AL9LH-ról B9S-re" oldalhoz. Ha nem tudod megoldani a problémád az oldal tanácsai alapján, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és írd le a problémádat és azt is hogy mi az amit már próbáltál.
 
-## Issues with SafeB9SInstaller
+## Problémák a SafeB9SInstaller-rel
 
 <!--@include: ./_include/troubleshooting-sb9si-bin.md -->
 

docs/hu_HU/troubleshooting-mset9.md

@@ -200,7 +200,7 @@ Ez valószínűleg azt jelzi, hogy már van egyedi firmware-ed. Érdemes elvége
 
 :::
 
-## Issues with SafeB9SInstaller
+## Problémák a SafeB9SInstaller-rel
 
 <!--@include: ./_include/troubleshooting-sb9si-bin.md -->
 
@@ -212,7 +212,7 @@ Ez valószínűleg azt jelzi, hogy már van egyedi firmware-ed. Érdemes elvége
 
 ::: tip
 
-Vissza a [Boot9strap telepítése (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))-hez
+Vissza a [Boot9strap telepítése (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))-hez
 
 :::
 

docs/hu_HU/troubleshooting-ntrboot.md

@@ -2,7 +2,7 @@
 
 Ez az oldal hibaelhárítási tanácsokat ad sűrűn előforduló problémákhoz a "Boot9strap telepítése (ntrboot)" oldalhoz. Ha nem tudod megoldani a problémád az oldal tanácsai alapján, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és írd le a problémádat és azt is hogy mi az amit már próbáltál.
 
-## Issues with SafeB9SInstaller
+## Problémák a SafeB9SInstaller-rel
 
 <!--@include: ./_include/troubleshooting-sb9si-firm.md -->
 

docs/hu_HU/troubleshooting-safecerthax.md

@@ -2,7 +2,7 @@
 
 Ez az oldal hibaelhárítási tanácsokat ad sűrűn előforduló problémákhoz a "Boot9strap telepítése (safecerthax)" oldalhoz. Ha nem tudod megoldani a problémád az oldal tanácsai alapján, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és írd le a problémádat és azt is hogy mi az amit már próbáltál.
 
-## Issues with SafeB9SInstaller
+## Problémák a SafeB9SInstaller-rel
 
 <!--@include: ./_include/troubleshooting-sb9si-bin.md -->
 

docs/hu_HU/troubleshooting-soundhax.md

@@ -30,7 +30,7 @@ Ha ez sikertelen, próbálkozz egy másik SD kártyával.
 
 :::
 
-## Issues with SafeB9SInstaller
+## Problémák a SafeB9SInstaller-rel
 
 <!--@include: ./_include/troubleshooting-sb9si-bin.md -->
 

docs/hu_HU/troubleshooting-ssloth-browser.md

@@ -90,7 +90,7 @@ Ha ez sikertelen, próbálkozz egy másik SD kártyával.
 
 :::
 
-## Issues with SafeB9SInstaller
+## Problémák a SafeB9SInstaller-rel
 
 <!--@include: ./_include/troubleshooting-sb9si-bin.md -->
 

docs/hu_HU/troubleshooting-super-skaterhax.md

@@ -14,7 +14,7 @@ Ezak a lépések csak a "Boot9strap telepítése (super-skaterhax)" oldalhoz ér
 
 Ha nincs szín villogás a "GO GO!" megnyomása után:
 
-- Ensure that you have set your system date and [region](/images/screenshots/skaterhax/skater-lang.png) correctly
+- Legyél biztos abban, hogy a rendszer idő és [régiós beállításaid](/images/screenshots/skaterhax/skater-lang.png) megfelelőek
 - Biztosítsd, hogy ne legyen másik böngésző fül megnyitva, majd indítsd újra a böngészőt és próbáld újra az exploit-ot
 
 Ha a képernyő színeket villogtat, akkor lefagy/összeomlik:
@@ -30,7 +30,7 @@ Ha a képernyő színeket villogtat, akkor lefagy/összeomlik:
 
 :::: details "An error has occurred. Hold down the POWER button to turn off the power..." (fekete képernyő szöveggel)
 
-A `arm11code.bin` fájl hiányzik, vagy rossz helyen van. Make sure to copy the files of the [latest version of super-skaterhax](https://skater.nintendohomebrew.com/) for your region and version to the root of your SD card (not inside of a folder).
+A `arm11code.bin` fájl hiányzik, vagy rossz helyen van. Biztosítsd, hogy [super-skaterhax legfrissebb verziójából](https://skater.nintendohomebrew.com/) régiódhoz és verziódhoz tartozó fájlokat az SD kártya gyökerébe másold (nem egy mappán belülre).
 
 ::: info
 
@@ -46,7 +46,7 @@ Ez valószínűleg azt jelzi, hogy már van egyedi firmware-ed. Érdemes elvége
 
 :::
 
-## Issues with SafeB9SInstaller
+## Problémák a SafeB9SInstaller-rel
 
 <!--@include: ./_include/troubleshooting-sb9si-bin.md -->
 

docs/hu_HU/troubleshooting-updating-b9s.md

@@ -2,7 +2,7 @@
 
 Ez az oldal hibaelhárítási tanácsokat ad sűrűn előforduló problémákhoz a "B9S frissítése" oldalhoz. Ha nem tudod megoldani a problémád az oldal tanácsai alapján, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és írd le a problémádat és azt is hogy mi az amit már próbáltál.
 
-## Issues with SafeB9SInstaller
+## Problémák a SafeB9SInstaller-rel
 
 <!--@include: ./_include/troubleshooting-sb9si-firm.md -->
 

docs/id_ID/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    - Updates while using B9S + Luma (what you have) are safe
    - The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
-   - If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

docs/id_ID/troubleshooting-mset9.md

@@ -212,7 +212,7 @@ This likely indicates that you already have custom firmware. You should [check f
 
 ::: tip
 
-Go back to [Installing boot9strap (MSET9-CLI)](installing-boot9strap-\(mset9-cli\))
+Go back to [Installing boot9strap (MSET9 CLI)](installing-boot9strap-\(mset9-cli\))
 
 :::
 

docs/it_IT/_include/sysupdate.md

@@ -1,5 +1,5 @@
 1. Aggiorna la console andando su Impostazioni della console, poi "Impostazioni generali", infine scorri a destra e seleziona "Aggiornamento"
    - Gli aggiornamenti effettuati usando B9S + Luma (ora installato) sono sicuri
    - Potrebbe apparire il messaggio "Nella console è già presente il software di sistema più recente". È normale se hai già installato l'ultima versione; prosegui con la sezione successiva
-   - Se ottieni un errore, imposta sia i DNS sia il Proxy su "Auto"
+   - If this gives you an error, set your DNS settings to "Auto" and your Proxy settings to "No"
    - Se l'errore continua a presentarsi, [segui questa guida per risolvere il problema](troubleshooting#finalizing-setup)