Merge pull request #74 from Chaosgabe/patch-1

Patch 1
ho0ber · Jun 25, 2020 · 4e85c67 · 4e85c67
2 parents 26cce0d + ed9bd35
commit 4e85c67
Show file tree

Hide file tree

Showing 2 changed files with 5 additions and 4 deletions.
diff --git a/NK2Tray_Display/BOM.md b/NK2Tray_Display/BOM.md
@@ -11,7 +11,7 @@
  3x  	NK2DisplayLatch.stl
 
 As the case and the latches do not bear any load, you can use a low infill. 25% is more than enough. Use 2-3 perimeter walls The case is designed to be printed with the face on the print bed, that should get you a nice surface to look at.
-Print the as they are designed and use supports under the overhang. Use at least 3 perimeter walls, again infill doesn´t matter that much.
+Print the latches as they are designed and use supports under the overhang. Use at least 3 perimeter walls, again infill doesn´t matter that much.
 
 
 
@@ -28,7 +28,6 @@ https://www.amazon.de/gp/product/B017C09ETS/ref=ppx_yo_dt_b_search_asin_title?ie
 
 1x Custom PCB
 Gerber_PCB_NK2Tray_Display.zip
-[As of 10.12.2019 i still have 4 bare PCBs in my drawer, contact me if you want to buy one at cost of 2.5€ + shipping]
 
 
 

diff --git a/NK2Tray_Display/Readme.md b/NK2Tray_Display/Readme.md
@@ -16,8 +16,10 @@ alternative firmware in the Subfolder "NK2Tray_DisplayFW_v2". See readme in this
 * No fixation between the NK2 and the display yet
 
 #### The ugly
-* The shown icons are hardcoded in the arduino sketch
-* The host ip is hardcoded in the arduino sketch
+* ~~The shown icons are hardcoded in the arduino sketch~~
+* ~~The host ip is hardcoded in the arduino sketch~~
+
+  (Solved thanks to the new firmware V1 from piLo)
 
 ## How to build you own
 You will need a handfull of modules easily available online, the PCB and a few 3d printed parts.