Releases: ihsoft/KAS
Releases · ihsoft/KAS
KAS v1.12
KAS v1.11
KAS v1.10
KAS v1.9
KAS v1.8
1.8 (June 27th, 2021):
- [NOTICE] If a connected KAS part gets involved in a stock EVA construction operation, it will get immediately detached from the peer. To avoid unpexected behvior, it's recommended to manually break the link before using EVA construction mode.
- [NOTICE] The interactive links (like in
PCB
) are now not possible in EVA construction mode. - [Compatibility] Drop AVC version check due to the KSP
1.12
duplicated mods handling bug. - [Change] Better detect if any of the peers in the KAS connection got destroyed for any reason. The link gets properly broken in this case.
- [Enhancement] Allow attaching to the winches surface to let reinforcing them with struts.
- [Enhancement] Don't show resources that cannot be transferred in the RTS GUI.
- [Enhancement] Allow disabling the controls hints in the RTS resource transfer dialog. Use setting
showTransferDialogHints
. - [Enhancement] Allow disabling the controls hints in the winches remote control dialog. Use setting
showRemoteControlDialogHints
. - [Enhancement #248] Add ability to scale Transfer GUI.
- [Enhancement #321] Scale the Winch GUI dialog.
- [Fix #302] GUI does not respect hide/show function.
- [Fix #306] Logs spam from the parts dropped on the ground.
- [Fix #307] Interactive attach mode conflicts with construction mode.
- [Fix #308] Linked parts can be dragged in construct mode.
- [Fix #309] TJ parts cannot align when pulled out of cargo.
- [Fix #311] Breaks the Asteroid Redirect Training Mission.
- [Fix #313] Coupling vessels via the rigid link cause vessel breakage.
- [Fix #314] Retract cable option is visible when the connector is locked.
- [Fix #315] Attaching KAS links resets EVA editor parts highlighting.
- [Fix #316] The detached physicsless parts stay physicsless.
- [Fix #317] Coupling role delegation doesn't work.
- [Fix #318] EVA construction mode highlighting stays on the KAS pipes after the mode is canceled.
- [Fix #320] Renderer is active even on the locked winch connector.
KAS v1.7
1.7 (July 30th, 2020):
- [Change] Better react on the attached part(s) destruction to properly reset the link state.
- [Change] Some performance improvement for the winch connector handling.
- [Change] Update EN/RU localizations to version
6
. - [Change] Update Chinese localization.
- [Fix #295] Stop using
MiniAVC.dll
in favor ofMiniAVC-V2.dll
. - [Fix #297] Decoupling near winch connected in editor causes the winch to break in to two separate vessels.
KAS v1.6
1.6 (April 26th, 2020):
- [Fix #289] RTS-1 docking mode is not reset on decoupling.
- [Change] Stop complaining about KSP minor version change.
- [Enhancement] Add two new localization strings for the custom corridors:
Corridor-1000
andCorridor-1500
. - [Enhancement] Add an optional patch
MM-LegacyKASPipesPart.txt
to simulate the oldKAS
pipes. Use at your own risk!