feat: Modify optimized compaction to cover edge cases

tsdb/config.go

@@ -52,6 +52,10 @@ const (
 	// block in a TSM file
 	DefaultMaxPointsPerBlock = 1000
 
+	// AggressiveMaxPointsPerBlock is used when we want to further compact blocks
+	// it is 100 times the default amount of points we use per block
+	AggressiveMaxPointsPerBlock = DefaultMaxPointsPerBlock * 100
+
 	// DefaultMaxSeriesPerDatabase is the maximum number of series a node can hold per database.
 	// This limit only applies to the "inmem" index.
 	DefaultMaxSeriesPerDatabase = 1000000
@@ -77,8 +81,20 @@ const (
 	// partition snapshot compactions that can run at one time.
 	// A value of 0 results in runtime.GOMAXPROCS(0).
 	DefaultSeriesFileMaxConcurrentSnapshotCompactions = 0
+
+	// MaxTSMFileSize is the maximum size of TSM files.
+	MaxTSMFileSize = uint32(2048 * 1024 * 1024) // 2GB
 )
 
+var SingleGenerationReasonText string = SingleGenerationReason()
+
+// SingleGenerationReason outputs a log message for our single generation compaction
+// when checked for full compaction.
+// 1048576000 is a magic number for bytes per gigabyte.
+func SingleGenerationReason() string {
+	return fmt.Sprintf("not fully compacted and not idle because single generation with more than 2 files under %d GB and more than 1 file(s) under aggressive compaction points per block count (%d points)", int(MaxTSMFileSize/1048576000), AggressiveMaxPointsPerBlock)
+}
+
 // Config holds the configuration for the tsbd package.
 type Config struct {
 	Dir    string `toml:"dir"`

tsdb/engine/tsm1/compact.go

@@ -32,7 +32,6 @@ import (
 	"go.uber.org/zap"
 )
 
-const maxTSMFileSize = uint32(2048 * 1024 * 1024) // 2GB
 const logEvery = 2 * DefaultSegmentSize
 
 const (
@@ -96,7 +95,13 @@ type CompactionGroup []string
 type CompactionPlanner interface {
 	Plan(lastWrite time.Time) ([]CompactionGroup, int64)
 	PlanLevel(level int) ([]CompactionGroup, int64)
-	PlanOptimize() ([]CompactionGroup, int64)
+	// PlanOptimize will return the groups for compaction, the compaction group length,
+	// and the amount of generations within the compaction group.
+	// generationCount needs to be set to decide how many points per block during compaction.
+	// This value is mostly ignored in normal compaction code paths, but,
+	// for the edge case where there is a single generation with many
+	// files under 2 GB this value is an important indicator.
+	PlanOptimize() (compactGroup []CompactionGroup, compactionGroupLen int64, generationCount int64)
 	Release(group []CompactionGroup)
 	FullyCompacted() (bool, string)
 
@@ -225,6 +230,27 @@ func (c *DefaultPlanner) FullyCompacted() (bool, string) {
 	} else if gens.hasTombstones() {
 		return false, "not fully compacted and not idle because of tombstones"
 	} else {
+		// For planning we want to ensure that if there is a single generation
+		// shard, but it has many files that are under 2 GB and many files that are
+		// not at the aggressive compaction points per block count (100,000) we further
+		// compact the shard. It is okay to stop compaction if there are many
+		// files that are under 2 GB but at the aggressive points per block count.
+		if len(gens) == 1 && len(gens[0].files) > 1 {
+			aggressivePointsPerBlockCount := 0
+			filesUnderMaxTsmSizeCount := 0
+			for _, tsmFile := range gens[0].files {
+				if c.FileStore.BlockCount(tsmFile.Path, 1) >= tsdb.AggressiveMaxPointsPerBlock {
+					aggressivePointsPerBlockCount++
+				}
+				if tsmFile.Size < tsdb.MaxTSMFileSize {
+					filesUnderMaxTsmSizeCount++
+				}
+			}
+
+			if filesUnderMaxTsmSizeCount > 1 && aggressivePointsPerBlockCount < len(gens[0].files) {
+				return false, tsdb.SingleGenerationReasonText
+			}
+		}
 		return true, ""
 	}
 }
@@ -335,25 +361,24 @@ func (c *DefaultPlanner) PlanLevel(level int) ([]CompactionGroup, int64) {
 // PlanOptimize returns all TSM files if they are in different generations in order
 // to optimize the index across TSM files.  Each returned compaction group can be
 // compacted concurrently.
-func (c *DefaultPlanner) PlanOptimize() ([]CompactionGroup, int64) {
+func (c *DefaultPlanner) PlanOptimize() (compactGroup []CompactionGroup, compactionGroupLen int64, generationCount int64) {
 	// If a full plan has been requested, don't plan any levels which will prevent
 	// the full plan from acquiring them.
 	c.mu.RLock()
 	if c.forceFull {
 		c.mu.RUnlock()
-		return nil, 0
+		return nil, 0, 0
 	}
 	c.mu.RUnlock()
 
 	// Determine the generations from all files on disk.  We need to treat
 	// a generation conceptually as a single file even though it may be
 	// split across several files in sequence.
 	generations := c.findGenerations(true)
+	fullyCompacted, _ := c.FullyCompacted()
 
-	// If there is only one generation and no tombstones, then there's nothing to
-	// do.
-	if len(generations) <= 1 && !generations.hasTombstones() {
-		return nil, 0
+	if fullyCompacted {
+		return nil, 0, 0
 	}
 
 	// Group each generation by level such that two adjacent generations in the same
@@ -363,11 +388,6 @@ func (c *DefaultPlanner) PlanOptimize() ([]CompactionGroup, int64) {
 	for i := 0; i < len(generations); i++ {
 		cur := generations[i]
 
-		// Skip the file if it's over the max size and contains a full block and it does not have any tombstones
-		if cur.count() > 2 && cur.size() > uint64(maxTSMFileSize) && c.FileStore.BlockCount(cur.files[0].Path, 1) == tsdb.DefaultMaxPointsPerBlock && !cur.hasTombstones() {
-			continue
-		}
-
 		// See if this generation is orphan'd which would prevent it from being further
 		// compacted until a final full compactin runs.
 		if i < len(generations)-1 {
@@ -392,21 +412,21 @@ func (c *DefaultPlanner) PlanOptimize() ([]CompactionGroup, int64) {
 	}
 
 	// Only optimize level 4 files since using lower-levels will collide
-	// with the level planners
+	// with the level planners. If this is a single generation optimization
+	// do not skip any levels.
 	var levelGroups []tsmGenerations
-	for _, cur := range groups {
-		if cur.level() == 4 {
-			levelGroups = append(levelGroups, cur)
+	if len(generations) == 1 {
+		levelGroups = append(levelGroups, groups...)
+	} else {
+		for _, cur := range groups {
+			if cur.level() == 4 {
+				levelGroups = append(levelGroups, cur)
+			}
 		}
 	}
 
 	var cGroups []CompactionGroup
 	for _, group := range levelGroups {
-		// Skip the group if it's not worthwhile to optimize it
-		if len(group) < 4 && !group.hasTombstones() {
-			continue
-		}
-
 		var cGroup CompactionGroup
 		for _, gen := range group {
 			for _, file := range gen.files {
@@ -418,10 +438,10 @@ func (c *DefaultPlanner) PlanOptimize() ([]CompactionGroup, int64) {
 	}
 
 	if !c.acquire(cGroups) {
-		return nil, int64(len(cGroups))
+		return nil, int64(len(cGroups)), int64(len(generations))
 	}
 
-	return cGroups, int64(len(cGroups))
+	return cGroups, int64(len(cGroups)), int64(len(generations))
 }
 
 // Plan returns a set of TSM files to rewrite for level 4 or higher.  The planning returns
@@ -449,7 +469,7 @@ func (c *DefaultPlanner) Plan(lastWrite time.Time) ([]CompactionGroup, int64) {
 			var skip bool
 
 			// Skip the file if it's over the max size and contains a full block and it does not have any tombstones
-			if len(generations) > 2 && group.size() > uint64(maxTSMFileSize) && c.FileStore.BlockCount(group.files[0].Path, 1) == tsdb.DefaultMaxPointsPerBlock && !group.hasTombstones() {
+			if len(generations) > 2 && group.size() > uint64(tsdb.MaxTSMFileSize) && c.FileStore.BlockCount(group.files[0].Path, 1) == tsdb.DefaultMaxPointsPerBlock && !group.hasTombstones() {
 				skip = true
 			}
 
@@ -525,7 +545,7 @@ func (c *DefaultPlanner) Plan(lastWrite time.Time) ([]CompactionGroup, int64) {
 		// Skip the file if it's over the max size and contains a full block or the generation is split
 		// over multiple files.  In the latter case, that would mean the data in the file spilled over
 		// the 2GB limit.
-		if g.size() > uint64(maxTSMFileSize) && c.FileStore.BlockCount(g.files[0].Path, 1) == tsdb.DefaultMaxPointsPerBlock {
+		if g.size() > uint64(tsdb.MaxTSMFileSize) && c.FileStore.BlockCount(g.files[0].Path, 1) == tsdb.DefaultMaxPointsPerBlock {
 			start = i + 1
 		}
 
@@ -569,7 +589,7 @@ func (c *DefaultPlanner) Plan(lastWrite time.Time) ([]CompactionGroup, int64) {
 			}
 
 			// Skip the file if it's over the max size and it contains a full block
-			if gen.size() >= uint64(maxTSMFileSize) && c.FileStore.BlockCount(gen.files[0].Path, 1) == tsdb.DefaultMaxPointsPerBlock && !gen.hasTombstones() {
+			if gen.size() >= uint64(tsdb.MaxTSMFileSize) && c.FileStore.BlockCount(gen.files[0].Path, 1) == tsdb.DefaultMaxPointsPerBlock && !gen.hasTombstones() {
 				startIndex++
 				continue
 			}
@@ -905,6 +925,10 @@ func (c *Compactor) WriteSnapshot(cache *Cache, logger *zap.Logger) ([]string, e
 
 // compact writes multiple smaller TSM files into 1 or more larger files.
 func (c *Compactor) compact(fast bool, tsmFiles []string, logger *zap.Logger) ([]string, error) {
+	// Sets the points per block size. The larger this value is set
+	// the more points there will be in a single index. Under normal
+	// conditions this should always be 1000 but there is an edge case
+	// where this is increased.
 	size := c.Size
 	if size <= 0 {
 		size = tsdb.DefaultMaxPointsPerBlock
@@ -1190,7 +1214,7 @@ func (c *Compactor) write(path string, iter KeyIterator, throttle bool, logger *
 
 		// If we have a max file size configured and we're over it, close out the file
 		// and return the error.
-		if w.Size() > maxTSMFileSize {
+		if w.Size() > tsdb.MaxTSMFileSize {
 			if err := w.WriteIndex(); err != nil {
 				return err
 			}