In conjunction with src.git, ports.git, core.git and plugins.git they create sets, packages and images for the OPNsense project. The license is a standard BSD 2-Clause as reproduced here for your convenience:
Copyright (c) 2014-2016 Franco Fichtner <franco@opnsense.org>
Copyright (c) 2004-2011 Scott Ullrich <sullrich@gmail.com>
Copyright (c) 2005 Poul-Henning Kamp <phk@FreeBSD.org>
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Install FreeBSD 10.3-RELEASE (i386 or amd64 depending on your target arch) on a machine with at least 25GB of hard disk (UFS works better than ZFS) and at least 6GB of RAM to successfully build all standard images. All tasks require a root user. Do the following to grab the repositories (overwriting standard ports and src):
# pkg install git
# cd /usr
# rm -rf src ports
# git clone https://github.com/opnsense/plugins
# git clone https://github.com/opnsense/ports
# git clone https://github.com/opnsense/tools
# git clone https://github.com/opnsense/core
# git clone https://github.com/opnsense/src
# cd tools
# make cdrom
If successful, a cdrom image can be found here: /tmp/images
The build is broken down into individual stages: base, kernel and ports can be built separately and repeatedly without affecting the others. All stages can be reinvoked and continue building without cleaning the previous progress. A final stage assembles all three stages into a target image.
All build steps are invoked via make(1):
# make step OPTION="value"
Available build options are:
- ARCH: the target architecture if not native
- CONFIG: reads the below from the specified file
- DEVICE: loads device-specific modifications, e.g. "a10" (default)
- FLAVOUR: "OpenSSL" (default), "LibreSSL"
- MIRRORS: a list of mirrors to prefetch sets from
- NAME: "OPNsense" (default)
- PRIVKEY: the private key for signing sets
- PUBKEY: the public key for signing sets
- SETTINGS: the name of the selected settings in config/
- SPEED: serial speed, e.g. "115200" (default)
- TYPE: the base name of the top package to be installed
- SUFFIX: the suffix of top package name (empty, "-stable", "-devel")
- UEFI: "yes" for amd64 hybrid images with optional UEFI boot
- VERSION: a version tag (if applicable)
Build the userland binaries, bootloader and administrative files:
# make base
Build the kernel and loadable kernel modules:
# make kernel
Build all the third-party ports:
# make ports
Build additional plugins if needed:
# make plugins
Wrap up our core as a package:
# make core
A cdrom live image is created using:
# make cdrom
A serial memstick image is created using:
# make serial
A vga memstick image is created using:
# make vga
A flash card disk image (NanoBSD) is created using:
# make nano
A virtual machine disk image is created using:
# make vm
This feature is currently experimental. It requires to install a qemu package for user mode emulation:
# pkg install qemu-user-static
The current target is the Raspberry Pi 1 / 2 using the option ARCH=arm:armv6 and is supposed to run best on i386 for a matching 32 bit size.
In order to speed up building of an emulated build, the xtools set can be build:
# make xtools ARCH=arm:armv6
The xtools set works similar to the distfiles set.
Device-specific settings can be found and added in the device/ directory. Of special interest are hooks into the build process for required non-default settings for image builds. The .conf files are shell scrips that can define hooks in the form of e.g.:
serial_hook()
{
# ${1} is the target file system root
touch ${1}/my_custom_file
}
These hooks are available for all image types, namely cdrom, nano, serial, vga and vm. Device-specific hooks are loaded after config-specific hooks and both of them can coexist in a given build.
Before building images, you can run the regression tests to check the integrity of your core.git modifications plus generate output for the style checker:
# make test
For very fast ports rebuilding of already installed packages the following works:
# make ports-<packagename>[,...]
For even faster ports building it may be of use to cache all distribution files before running the actual build:
# make distfiles
Compiled sets can be prefetched from a mirror, while removing any previously available set:
# make prefetch-<option>[,...] VERSION=version.to.prefetch
Available prefetch options are:
- base: prefetch the base set
- kernel: prefetch the kernel set
- packages: prefetch the packages set
Core packages (pristine copies) can be batch-built using:
# make core-<repo_branch_or_tag>[,...]
Package sets (may be signed depending on whether the key is found under /root) ready for web server deployment are automatically generated and modified by ports.sh and core.sh.
Signing for all sets can be redone or applied to a previous run that did not sign by invoking:
# make sign
Virtual machine images come in varying disk formats and sizes. The default format is vmdk with 20G and 1G swap. If you want to change that you can manually alter the invoke using:
# make vm-<format>[,<size>[,<swap>]]
Available virtual machine disk formats are:
- qcow: Qemu, KVM (legacy format)
- qcow2: Qemu, KVM (not backwards-compatible)
- raw: Unformatted (sector by sector)
- vhd: VirtualPC, Hyper-V, Xen (dynamic size)
- vhdf: Azure, VirtualPC, Hyper-V, Xen (fixed size)
- vmdk: VMWare, VirtualBox (dynamic size)
The swap argument is either its size or set to "off" to disable.
Release sets can be built using:
# make release VERSION=product.version.number_revision
Kernel, base, packages and release sets are stored under /tmp/sets
All final images are stored under /tmp/images
A couple of build machine cleanup helpers are available via the clean script:
# make clean-<option>[,...]
Available clean options are:
- base: remove base set
- distfiles: remove distfiles set
- cdrom: remove cdrom image
- core: remove core from packages set
- images: remove all images
- kernel: remove kernel set
- nano: remove nano image
- obj: remove all object directories
- packages: remove packages set
- plugins: remove plugins from packages set
- ports: alias for "packages" option
- release: remove release set
- serial: remove serial image
- sets: remove all sets
- src: reset kernel/base build directory
- stage: reset main staging area
- vga: remove vga image
- vm: remove vm image
- xtools: remove xtools set
The ports tree has a few of our modifications and is sometimes a bit ahead of FreeBSD. In order to keep the local changes, a skimming script is used to review and copy upstream changes:
# make skim[-<option>]
Available options are:
- used: review and copy upstream changes
- unused: copy unused upstream changes
- (none): all of the above
In case a release was wrapped up, the base package list and obsoleted files need to be regenerated. This is done using:
# make rebase
Shall any debugging be needed inside the build jail, the following command will use chroot(8) to enter the active build jail:
# make chroot[-<subdir>]
There's also the posh way to boot a final image using bhyve(8):
# make boot-<image>
Last but not least, in case build variables needs to be inspected, they can be printed selectively using:
# make print-<variable1>[,<variable2>]