Corner level with probe and 2mm backoff after X and Y homing

knutwurst · Jul 19, 2021 · 4cbd5e2 · 4cbd5e2
1 parent 123184f
commit 4cbd5e2
Show file tree

Hide file tree

Showing 2 changed files with 8 additions and 7 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -1665,22 +1665,23 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
-  //#define MESH_EDIT_MENU        // Add a menu to edit mesh points
+  #define MESH_EDIT_MENU          // Add a menu to edit mesh points
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
 #if ENABLED(LEVEL_BED_CORNERS)
-  #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
+  //#define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
+  #define LEVEL_CORNERS_INSET_LFRB { 30, 40, 40, 30 }
   #define LEVEL_CORNERS_HEIGHT      0.0   // (mm) Z height of nozzle at leveling points
-  #define LEVEL_CORNERS_Z_HOP       4.0   // (mm) Z height of nozzle between leveling points
-  //#define LEVEL_CENTER_TOO              // Move to the center after the last corner
-  //#define LEVEL_CORNERS_USE_PROBE
+  #define LEVEL_CORNERS_Z_HOP       5.0   // (mm) Z height of nozzle between leveling points
+  #define LEVEL_CENTER_TOO              // Move to the center after the last corner
+  #define LEVEL_CORNERS_USE_PROBE
   #if ENABLED(LEVEL_CORNERS_USE_PROBE)
     #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1
     #define LEVEL_CORNERS_VERIFY_RAISED   // After adjustment triggers the probe, re-probe to verify
-    //#define LEVEL_CORNERS_AUDIO_FEEDBACK
+    #define LEVEL_CORNERS_AUDIO_FEEDBACK
   #endif
 
   /**

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -769,7 +769,7 @@
 #define HOMING_BUMP_MM      { 5, 5, 2 }       // (mm) Backoff from endstops after first bump
 #define HOMING_BUMP_DIVISOR { 2, 2, 4 }       // Re-Bump Speed Divisor (Divides the Homing Feedrate)
 
-//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (mm) Backoff from endstops after homing
+#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (mm) Backoff from endstops after homing
 
 //#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
 //#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X