TBD
The first thing you need to do is to clone this repo down and set up to use softlayer cli and ansible:
$ git clone https://github.com/IBM/deploy-ibm-cloud-private.git
$ cd deploy-ibm-cloud-private
$ sudo pip install -r requirements.txtNext you need to prepare the softlayer CLI with your credentials:
$ slcli config setup
Username: XXXXXX
API Key or Password: XXXXXXXXXXXXXXXXXXXXX
Endpoint (public|private|custom) [public]:
Timeout [0]:
:..............:..................................................................:
: name : value :
:..............:..................................................................:
: Username : XXXXXX :
: API Key : XXXXXXXXXXXXXXXXXXXXX :
: Endpoint URL : https://api.softlayer.com/xmlrpc/v3.1/ :
: Timeout : not set :
:..............:..................................................................:
Are you sure you want to write settings to "/home/XXXX/.softlayer"? [Y/n]: YCreate a SSH key to use:
$ ssh-keygen -f cluster/ssh_key -P ""
Generating public/private rsa key pair.
Overwrite (y/n)? y
Your identification has been saved in /home/XXXX/.ssh/cuttle-demo.
Your public key has been saved in /home/XXXX/.ssh/cuttle-demo.pub.
$ slcli sshkey add -f cluster/ssh_key.pub icp-key
$ slcli sshkey list
:........:....................:.................................................:.......:
: id : label : fingerprint : notes :
:........:....................:.................................................:.......:
: 926125 : icp-key : 2c:ba:f4:8d:0c:4f:35:3d:fb:98:0b:30:b3:2e:a4:09 : - :
:........:....................:.................................................:.......:Set the
sl_ssh_keyvariable inclusters/config.yamlwith the id from the output of theslcli sshkey listcommand.
Pick a datacenter and a VLAN to deploy to:
slcli vlan list
:.........:........:......:..........:............:..........:.................:............:
: id : number : name : firewall : datacenter : hardware : virtual_servers : public_ips :
:.........:........:......:..........:............:..........:.................:............:
: 2073387 : 866 : - : No : dal09 : 0 : 1 : 61 :
: 2073385 : 812 : - : No : dal09 : 0 : 1 : 13 :
Set the
sl_datacenterandsl_vlanvariables inclusters/config.yamlusing the datacenter name (ex dal09) and vlan id (ex 2073387). Unless you're very familiar with your softlayer account you may need to use the softlayer web portal to pick a VLAN to use. If you skip this step SL will pick a random vlan and you may not be able to communicate on the backend network.
Using ansible playbooks we've prepared you can create the VMs necessary to deploy ICP:
While the playbook runs fast, it can take some time for the systems to actually come online and be ready.
$ ansible-playbook playbooks/create_sl_vms.yml
PLAY [create servers] ****************************************************************************************************************************************************************
TASK [Include cluster vars] **********************************************************************************************************************************************************
ok: [localhost]
TASK [create master] *****************************************************************************************************************************************************************
changed: [localhost] => (item=icp-master01)
TASK [create workers] ****************************************************************************************************************************************************************
changed: [localhost] => (item=icp-worker01)
changed: [localhost] => (item=icp-worker02)
PLAY RECAP ***************************************************************************************************************************************************************************
localhost : ok=3 changed=2 unreachable=0 failed=0 While the above systems are being created we can slipstream the softlayer python libraries into the IBM Cloud Private deployer so that we can use the Softlayer Dynamic Inventory:
$ docker build -t ibmcom/cfc-installer:1.1.0-sl .
Sending build context to Docker daemon 120.3kB
Step 1/2 : FROM ibmcom/cfc-installer:1.1.0
---> 91bc38bcb3a8
Step 2/2 : RUN apt-get update && apt-get install -y python-pip && pip install softlayer
---> Using cache
---> 20dd79bda317
Successfully built 20dd79bda317
Successfully tagged ibmcom/cfc-installer:1.1.0-slOnce the systems are online you should be able to prepare them for the ICP install using the following Ansible playbook.
$ ssh-add cluster/ssh_key
$ ansible-playbook -i hosts prepare_sl_vms.yml -u root
PLAY [ensure connectivity to all nodes] **********************************************************************************************************************************************
TASK [check if python is installed] **************************************************************************************************************************************************
ok: [169.46.198.209]
ok: [169.46.198.195]
ok: [169.46.198.216]
...
...
PLAY RECAP ***************************************************************************************************************************************************************************
169.46.198.195 : ok=8 changed=6 unreachable=0 failed=0
169.46.198.209 : ok=8 changed=6 unreachable=0 failed=0
169.46.198.216 : ok=8 changed=6 unreachable=0 failed=0 Once that playbook has finished running we can use our modified deployer to deploy ICP:
$ cat ~/.softlayer
[softlayer]
username = XXXXX
api_key = YYYY
$ docker run -e SL_USERNAME=XXXXX -e SL_API_KEY=YYYY -e LICENSE=accept --net=host --rm -t -v "$(pwd)/cluster":/installer/cluster ibmcom/cfc-installer:1.1.0-sl install
...
...
PLAY RECAP *********************************************************************
169.46.198.XXX : ok=44 changed=22 unreachable=0 failed=0
169.46.198.YYY : ok=69 changed=39 unreachable=0 failed=0
169.46.198.ZZZ : ok=45 changed=22 unreachable=0 failed=0
POST DEPLOY MESSAGE ************************************************************
UI URL is https://169.46.198.XXX:8443 , default username/password is admin/admin
Access the URL using the username, password provided in last few lines of the ICP deployment
Click on admin on the top right hand corner of the screen to bring up a menu and select "Configure Client".
Copy and Paste the provided commands into a shell:
kubectl config set-cluster cfc --server=https://169.46.198.216:8001 --insecure-skip-tls-verify=true
kubectl config set-context cfc --cluster=cfc
kubectl config set-credentials user --token=eyJhbGciOiJSUzI1NiIsImtpZCI6IjY5NjI2ZDJkNjM2NjYzMmQ3MzY1NzI3NjY5NjM2NTJkNmI2NTc5NjkiLCJ0eXAiOiJKV1QifQ.eyJhdWQiOiJjZmMtc2VydmljZSIsImV4cCI6MTUwNTc5MTMwOCwiaWF0IjoxNTA1NzQ4MTA4LCJpc3MiOiJodHRwczovL21hc3Rlci5jZmM6ODQ0My9hY3MvYXBpL3YxL2F1dGgiLCJwcm9qZWN0cyI6WyJkZWZhdWx0Il0sInN1YiI6ImFkbWluIn0.wnjScyVuUUJyqt7AW4J6PrZ135dp8nWQTUmAqcjja15vaY4GQsu2lpZTn6AhmzQNWYfaYcLwc1ApcRBAB3h9oQlJOpSMI96U9XDYcMi1_i1AX8zN1EAFnklURK6TKPMy2OfNx8KOoWHTtRqBm-NDcla25aCpIrdHi7P9OPB2dcrHv7cYLBNwB6zWnzkM1EnRXYQIXDtKs1iX1K-A5Ph0Si3LIUg3LOjNML3Yn2D7vCWdItaGs86EE-2R2VVkYsLO19G09KwcLnhf5CmxxTjPDp2dOQjfwIFWbTmVQCFORtqj2Gt3X2EQFBwSru-e9M-fYcUiv6bqpd7WLufo-7q3bg
kubectl config set-context cfc --user=user --namespace=default
kubectl config use-context cfcCheck that you can run some basic commands against the cluster:
$ Client Version: version.Info{Major:"1", Minor:"6", GitVersion:"v1.6.4", GitCommit:"d6f433224538d4f9ca2f7ae19b252e6fcb66a3ae", GitTreeState:"clean", BuildDate:"2017-05-19T18:44:27Z", GoVersion:"go1.7.5", Compiler:"gc", Platform:"linux/amd64"}
Server Version: version.Info{Major:"1", Minor:"5", GitVersion:"v1.5.2", GitCommit:"08e099554f3c31f6e6f07b448ab3ed78d0520507", GitTreeState:"clean", BuildDate:"2017-02-05T08:03:16Z", GoVersion:"go1.7.5", Compiler:"gc", Platform:"linux/amd64"}
$ kubectl get nodes
NAME STATUS AGE VERSION
169.46.198.195 Ready 34m v1.5.2
169.46.198.209 Ready 34m v1.5.2
169.46.198.216 Ready,SchedulingDisabled 36m v1.5.2From here you should be able to interact with ICP via either the Web UI or the kubectl command.