Skip to content

a AddOn for HomeMatic CCU3 (Raspberrymatic) that will bring HomeKit to your CCU

License

Notifications You must be signed in to change notification settings

meistermolli/hap-homematic

 
 

Repository files navigation

HAP-HomeMatic

Build Status npm version Node.js CI Slack

a Raspberrymatic / CCU3 addon

This RaspberryMatic / CCU3 addon will allow you to access your HomeMatic devices from HomeKit. Its much like https://github.com/thkl/homebridge-homematic but without homebridge. All this runs on your RaspberryMatic / CCU3. You will not need any extra hardware.

Installation

Download the latest addon (hap-homematic-x.x.xx.tar.gz) from https://github.com/thkl/hap-homematic/releases/latest/ and install it via system preferences to your ccu.

A little bit later (the addon will install all other needed software) you will have a HomeKit button in your ccu system preference page.

This will not run on a older CCU2 model.

Used Ports :

  • 9874 -> Config WebUI
  • 9875 -> RPC event server
  • 9876 -> RPC event server CuxD (optional)
  • 9877..n HAP Instance 0 .. n

make sure your ccu firewall does not block ports 9874,9877 ... n

Stefan, of verdrahtet.info, has made a nice german tutorial here

HTTPS

If you are using the https version of your ccu WebUI page, you have to enable https for the hap-homematic configuration page also. hap-homematic will use the same self signed tls certificate as your ccu.

Authentication

You can use your ccu user management as an optional authentication for hap-homematic. If you turn on this feature, you have to call the configuration page from your ccu webUI system preference page to use a valid session. Only ccu admins are alowed to use the hap-homematic configuration page if authentication was turned on.

Concept of rooms

HAP the homekit accessory protocol does not know a room concept. So when you add one or more devices to a bridge the will appear at the same room as the bridge in your homekit client application. Therefore hap-homematic is able to fire up multiple bridges (hap instances). During the installation wizzard you may add a instance for each of your rooms, add theese instances to homekit and put them into rooms. From this time on adding a new device to an instance will place this device into the same room as your brigde.

FakeGato History

All generated homekit devices will support fakegato history (if there is a history option in eve). Please note: History is only available if u are using the eve app as a homekit controller.

Issues and not supported devices

Please open an issue here for all what went wrong. If you just have a question or want to know something consider to open a thread in Discussions

Documentation

Please find the documentation in the wiki

Icon

the icon was made by @roe1974

About

a AddOn for HomeMatic CCU3 (Raspberrymatic) that will bring HomeKit to your CCU

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • JavaScript 79.4%
  • CSS 19.7%
  • Other 0.9%