This project enables communication between an ESP32-S3 board and a connected BLE device. The ESP32-S3 board acts as a BLE/Web server, receiving commands from the connected device and performing specific actions based on the received commands. Additionally, it functions as an HID, allowing it to act as a keyboard and execute commands on the CMD or run applications.
- Arduino IDE
- ESP32-S3 board
- BLE device (e.g., smartphone, tablet)
-
Install the necessary libraries:
BLEDeviceBLEServerBLEUtilsUSBUSBHIDKeyboardWiFiesp_now
-
Upload the code to your ESP32-S3 board using the Arduino IDE.
-
Connect your ESP32-S3 board to a power source.
-
Scan for available Bluetooth devices on your BLE device (e.g., smartphone or tablet), or use web portal (localhost)
-
Connect to the ESP32-S3 BLE device from your BLE device.
-
Send commands to the ESP32-S3 BLE device using the connected BLE device (or use ip address assigned to esp32s3 for web base keyboard). Supported commands include:
- "test" - Print a defined word to the serial monitor.
- "#run_[command]" - Execute a command on the ESP32-S3 board.
- "#cmd_[command]" - Execute a command in the Windows command prompt.
- Other keywords and string will be send as it is to usb connected device.
-
The ESP32-S3 board will perform the specified actions based on the received commands. It can act as an HID and execute commands on the CMD or run applications.
If you encounter any issues or errors, please refer to the documentation or seek support from the ESP32-S3 and BLE community.
Note: I implementing new functionalities in this project, so this readme file might be outdated, so you better check completed issues labled with feature to know the latest implemented feature.