Message.h

#ifndef Message_h
#define Message_h

#include <Arduino.h>

#define PROTOCOL_VERSION 2

// Message types
typedef enum {
	M_SET = 0,
	M_REQUEST = 1,
	M_INTERNAL = 2,
	M_PRESENTATION

} commandType;

// Sensor variables that can be used in sketches
typedef enum {
	V_TEMP,V_HUM, V_LIGHT, V_DIMMER, V_PRESSURE, V_FORECAST, V_RAIN,
	V_RAINRATE, V_WIND, V_GUST, V_DIRECTION, V_UV, V_WEIGHT, V_DISTANCE,
	V_IMPEDANCE, V_ARMED, V_TRIPPED, V_WATT, V_KWH, V_SCENE_ON, V_SCENE_OFF,
	V_HEATER, V_HEATER_SW, V_LIGHT_LEVEL, V_VAR1, V_VAR2, V_VAR3, V_VAR4, V_VAR5,
	V_UP, V_DOWN, V_STOP, V_IR_SEND, V_IR_RECEIVE, V_FLOW, V_VOLUME, V_LOCK_STATUS
} variableType;

// Internal messages
// Remove I_BATTERY_DATE, I_LAST_TRIP, I_LAST_UPDATE

typedef enum {
	I_BATTERY_LEVEL, I_TIME, I_VERSION, I_REQUEST_ID,
	I_INCLUSION_MODE, I_RELAY_NODE, I_PING, I_PING_ACK,
	I_LOG_MESSAGE, I_CHILDREN, I_UNIT, I_SKETCH_NAME, I_SKETCH_VERSION
} internalMessageType;

// Sensor types
typedef enum {
	S_DOOR, S_MOTION, S_SMOKE, S_LIGHT, S_DIMMER, S_COVER, S_TEMP, S_HUM, S_BARO, S_WIND,
	S_RAIN, S_UV, S_WEIGHT, S_POWER, S_HEATER, S_DISTANCE, S_LIGHT_LEVEL, S_ARDUINO_NODE,
	S_ARDUINO_RELAY, S_LOCK, S_IR, S_WATER
} sensor;

// Possible return values by validate() when doing crc check of received message.
enum {
	VALIDATE_OK, VALIDATE_BAD_CRC, VALIDATE_BAD_VERSION
};

#define MAX_MESSAGE_LENGTH 32


// The message structure
typedef struct {
  uint8_t crc       	 	 : 8;    // 8 bits crc
  uint8_t version       	 : 3;    // 3 bits protocol version
  uint8_t requestAck       	 : 1;    // Set to 1 if this message should be acked
  uint8_t isAck       	 	 : 1;    // Set to 1 if this is the actual ack message

  uint8_t binary			 : 1; 	 // 1 bit. Data is binary and should be encoded when sent to sensor net gateway

  uint8_t commandType        : 2;    // 4 bits. Type of message. See commandType
  uint8_t type               : 8;	 // 8 bits. variableType or deviceType depending on messageType

  uint8_t from				 : 8;	 // 8 bits. RadioId of sender node
  uint8_t to      	         : 8;    // 8 bits. RadioId of destination node
  uint8_t last     	         : 8;    // 8 bits. RadioId of last node this message passed
  uint8_t childId            : 8;	 // 1 byte. Up to MAX_CHILD_DEVICES child sensors per radioId

} header_s;


typedef struct {
  header_s header;
  char data[MAX_MESSAGE_LENGTH - sizeof(header_s) + 1];  // Each message can transfer a payload. Add one extra byte for \0
} message_s;




class Message
{
  public:
	Message(boolean ack=false);


	void setDestination(uint8_t destination);
	void setAck(boolean enableAck);
	void setString();
	void setIntValue()
	void setLongValue()

	void getStringValue();
	void getIntValue();
	void getLongValue();
  private:
	message_s msg;
	bool ack;
	int intValue;
	float floatValue;

};

#endif