WebThings Gateway

Web of Things gateway.

Installation

• If you have a Rasberry Pi, the easiest way to use the gateway is to download and flash a pre-built software image to an SD card.
• If you prefer to use Docker, we have a prebuilt Docker image available here, for both ARM and amd64. You can also build your own image from this repository.
• On Fedora, Debian, Raspberry Pi OS, or Ubuntu, you can install the relevant .rpm or .deb package from the releases page.
• On Arch Linux, you can install the webthings-gateway AUR package. The PKGBUILD for this package can also be seen here.
• Otherwise, you can build it from source yourself (see below).

Documentation

• Getting Started Guide
• User Guide
• Wiki
• Various other docs

Community

• Discourse
• Matrix (#iot:mozilla.org)

Prerequisites for Building

Install OS

(If you're just installing on your PC, you can skip this step).

If you're installing on a Raspberry Pi then you may need to set up the OS on the Raspberry Pi first. See here for instructions.

Install Dependencies

Ubuntu/Debian Linux

$ sudo apt update
$ sudo apt install \
    autoconf \
    build-essential \
    curl \
    git \
    libbluetooth-dev \
    libboost-python-dev \
    libboost-thread-dev \
    libffi-dev \
    libglib2.0-dev \
    libpng-dev \
    libudev-dev \
    libusb-1.0-0-dev \
    pkg-config \
    python-six \
    python3-pip
$ sudo -H python3 -m pip install git+https://github.com/WebThingsIO/gateway-addon-python#egg=gateway_addon

Fedora Linux

$ sudo dnf --refresh upgrade
$ sudo dnf group install "C Development Tools and Libraries"
$ sudo dnf install \
    autoconf \
    bluez-libs-devel \
    boost-devel \
    boost-python2-devel \
    boost-python3-devel \
    curl \
    git \
    glib2-devel \
    libffi-devel \
    libpng-devel \
    libudev-devel \
    libusb1-devel \
    pkgconfig \
    python2-pip \
    python3-pip
$ sudo -H python2 -m pip install six
$ sudo -H python3 -m pip install git+https://github.com/WebThingsIO/gateway-addon-python#egg=gateway_addon

macOS

$ brew update
$ brew install \
    autoconf \
    libffi \
    pkg-config
$ sudo -H python2 -m pip install six
$ sudo -H python3 -m pip install git+https://github.com/WebThingsIO/gateway-addon-python#egg=gateway_addon

Install Node.js

nvm (Recommended)

nvm allows you to easily install different versions of node. To install nvm:

$ curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.37.2/install.sh | bash

Reinitialize your terminal session.

$ . ~/.bashrc

Manual

(If you already installed node via nvm you can skip this step)

Follow the directions from NodeJS to install on your platform.

Set up Bluetooth permissions (Linux only)

The following is required in order to let node and python3 use the Bluetooth adapter.

$ sudo setcap cap_net_raw+eip $(eval readlink -f `which node`)
$ sudo setcap cap_net_raw+eip $(eval readlink -f `which python3`)

Download and Build Gateway

• Clone the GitHub repository (or fork it first):

  $ git clone https://github.com/WebThingsIO/gateway.git
  

• Change into the gateway directory:

  $ cd gateway
  

• If you have chosen to install nvm above, install and use an LTS version of node and then set the default version. The .nvmrc file will be used by nvm to determine which version of node to install.

  $ nvm install
  $ nvm use
  $ nvm alias default $(node -v)
  

• Verify that node and npm have been installed:

  $ node --version
  v12.19.0
  $ npm --version
  6.14.8
  

  Note: these versions might differ from the LTS version installed locally.

• Install dependencies:

  $ npm ci
  

• Add Firewall exceptions (Fedora Linux Only)

  $ sudo firewall-cmd --zone=public --add-port=4443/tcp --permanent
  $ sudo firewall-cmd --zone=public --add-port=8080/tcp --permanent
  $ sudo firewall-cmd --zone=public --add-port=5353/udp --permanent
  

• Set up domain:

  • If you plan to use the provided tunneling service to set up a _.webthings.io domain:

    • Start the web server:

      $ npm start
      

    • Load http://localhost:8080 in your web browser (or use the server's IP address if loading remotely). Then follow the instructions on the web page to set up domain and register. Once this is done you can load https://localhost:4443 in your web browser (or use the server's IP address if loading remotely).

  • If you plan to use your own SSL certificate:

    • The HTTPS server looks for privatekey.pem and certificate.pem in the ssl sub-directory of the userProfile directory specified in your config. You can use a real certificate or generate a self-signed one by following the steps below.

      $ WEBTHINGS_HOME="${WEBTHINGS_HOME:=${HOME}/.webthings}"
      $ SSL_DIR="${WEBTHINGS_HOME}/ssl"
      $ [ ! -d "${SSL_DIR}" ] && mkdir -p "${SSL_DIR}"
      $ openssl genrsa -out "${SSL_DIR}/privatekey.pem" 2048
      $ openssl req -new -sha256 -key "${SSL_DIR}/privatekey.pem" -out "${SSL_DIR}/csr.pem"
      $ openssl x509 -req -in "${SSL_DIR}/csr.pem" -signkey "${SSL_DIR}/privatekey.pem" -out "${SSL_DIR}/certificate.pem"
      

    • Start the web server:

      $ npm start
      

    • Load https://localhost:4443 in your web browser (or use the server's IP address if loading remotely). Since you're using a self-signed certificate, you'll need to add a security exception in the browser.

Browser Support

The Gateway requires a browser that supports:

• Fetch
• Web Sockets
• ECMAScript 2015 (ES6)
• CustomEvent
• Custom Elements (V1)
• Shadow DOM (V1)

Currently, that translates roughly to:

• Firefox 63+
• Chrome 54+
• Edge 79+
• Safari 10.1+
• Opera 41+

Debugging

If you are using VS Code, simply use the "launch" target. It will build the gateway in debugger mode.

If you are not using VS Code, run npm run debug and it will build the gateway and launch it with --inspect.

Testing

Install Additional Dependencies

In order to run the browser tests, you'll need to install Google Chrome and a JDK (e.g. OpenJDK).

Running Tests

To run the linter and all tests:

$ npm run test

To run a single test:

$ npm run jest build/test/{test-name}.js

Source Code Structure

• config/ - Gateway configuration files
• deb/ - Tools for building .deb packages
• docker/ and Dockerfile - Tools for building Docker image
• image/ - Tools for building the Raspberry Pi image
• rpm/ - Tools for building .rpm packages
• src/
  • addons-test/ - Add-ons used strictly for testing
  • controllers/ - App URL routes and their logic
  • iso-639/ - Small utility for interacting with ISO-639 data, i.e. locale names
  • models/ - Data model and business logic
  • platforms/ - Platform-specific functionality
  • plugin/ - Utility classes and methods used by add-ons
  • rules-engine/ - The rules engine
  • test/ - Integration and unit tests
  • views/ - Handlebars templates
  • addon-loader.ts - Script used for starting up Node-based add-ons
  • addon-manager.ts - Manages add-ons (e.g. Zigbee, Z-Wave)
  • addon-utils.ts - Utilities for add-ons, e.g. for reading the manifests
  • app.ts - The main back end
  • certificate-manager.ts - Certificate registration and renewal, via Let's Encrypt
  • constants.ts - System-wide constants
  • db.ts - Manages the SQLite3 database
  • deferred.ts - Wraps up a promise in a slightly more convenient manner for passing around, or saving
  • ec-crypto.ts - Elliptic curve helpers for the ES256 curve
  • errors.ts - Common error classes
  • jwt-middleware.ts - Express middleware for determining authentication status
  • log-timestamps.ts - Utilities for adding timestamps to console logging functions
  • migrate.ts - User profile migration
  • oauth-types.ts - OAuth types
  • passwords.ts - Password utilities
  • platform.ts - Platform-specific utilities
  • push-service.ts - Push notification service
  • router.ts - Routes app URLs to controllers
  • sleep.ts - Small utility to implement a promise-based sleep
  • tunnel-service.ts - Utilities to determine state of tunnel and manage the PageKite process
  • user-profile.ts - Manages persistent user data
  • utils.ts - Various utility functions
  • wifi-setup.ts - Initial Wi-Fi setup code for Raspberry Pi OS
• static/ - Static CSS, JavaScript & image resources for web app front end
• tools/ - Helpful utilities (not part of the build)
• package.json - npm module manifest