- Motherboard Gigabyte Z390 Aorus Elite
- CPU Intel i9-9900K
- GPUs: iGPU Intel UHD 630 / AMD Radeon RX 6600 XT
- Audio Realtek ALC1220
- Ethernet Intel I219V7
- Wi-Fi + BT Fenvi FV-T919 (BCM94360CD).
- CSM: Disabled (mandatory)
- VT-d: Disabled
- Platform Power Management: Disabled
- XHCI Hand-Off: Enabled
- Network Stack: Disabled
- Wake on LAN: Disabled
- Initial Display Output: PCIe 1 Slot
- Integrated Graphics: Enabled
- DVMT Pre-allocated: 256M o higher
- Above 4G Decoding: Enabled
- CFG Lock: Disabled (mandatory)
- Fast Boot: Disabled
- OS Type: Windows 8/10
- Secure Boot: Disabled.
- dGPU AMD as main card
- iGPU headless mode
- Shutdown and restart
- Ethernet
- Sound (also HDMI)
- USB ports (USB port map for this board)
- Bluetooth Fenvi T919.
- Fenvi T919 Wi-Fi: It needs a fix, still in the development phase, created by the OCLP team
- Sleep: It doesn't always work as it should, sometimes it goes to sleep properly and other times the PC stays on.
macOS 15 is compatible with these Mac models with Intel processors:
- iMac 2019+ (iMac19,1 / iMac20,1 / iMac20,2)
- iMac Pro 2017+ (iMacPro1,1)
- Mac mini 2018+ (MacMini8,1)
- MacBook Pro 2018+ (MacBookPro15,1 / MacBookPro15,2 / MacBookPro16,1 / MacBookPro16,2 / MacBookPro16,3 / MacBookPro16,4)
- MacBook Air 2020+ (MacBookAir9,1)
- Mac Pro 2019+ (MacPro7,1).
The list of supported models compared to macOS 14 Sonoma has one change: MacBook Air which included models from 2018 and now only supports those from 2020.
All supported models except iMac19,1 (2019 iMac) have a T2 security chip, this is important when we talk about updates notification in System Settings (OTA: Over The Air updates).
Most of the OpenCore settings that were valid for Sonoma are also valid for Ventura. Main differences are in the versions of some kexts (not all of them are used on my hardware):
- Lilu 1.6.8 (if you use Lilu 1.6.7 you have to add
-lilubetaallin boot args) - AirportBrcmFixup 2.1.9 beta (you need
-btlfxbetain boot args) - CPUFriend 1.2.8
- CpuTscSync 1.1.1
- ECEnabler 1.0.5
- HibernationFixup 1.5.1
- IntelBluetoothFirmware 2.5.0
- RestrictEvents 1.1.3 (you need
-revbetain boot args) or 1.1.4 - VoodooInput 1.1.5
- WhateverGreen 1.3.7.
Other extensions may be the most recent official versions.
I get best results with iMac19.1 SMBIOS and the iGPU enabled in BIOS. These are the main details when configuring config.plist.
-
ACPI: SSDT-EC-USBX.aml, SSDT-PLUG.aml and SSDT-PMC.aml. SSDT-AWAC.aml is not required on my system but, if in doubt, add it because it does not cause any harm if it is present without being needed
-
ACPI >> Quirks: all = False
-
Booter >> Quirks: AvoidRuntimeDefrag, DevirtualiseMmio, ProtectUefiServices, ProvideCustomSlide, RebuildAppleMemoryMap, SetupVirtualMap and SyncRuntimePermissions = True
-
Booter >> ResizeAppleGpuBars=-1
-
DeviceProperties >> Add
- PciRoot(0x0)/Pci(0x2,0x0)
- AAPL,ig-platform-id | Data | 0300913E
- device-id | Data | 9B3E0000
- enable-metal | Data | 01000000
- rps-control | Data | 01000000
- PciRoot(0x0)/Pci(0x1.0x0)/Pci(0x0.0x0)/Pci(0x0.0x0)/Pci(0x0.0x0)
- unfairgva | Number | 6
- PciRoot(0x0)/Pci(0x1F,0x3)
- layout-id | Data | 07000000
- PciRoot(0x0)/Pci(0x14,0x0)
- acpi-wake-type | Data | 01
- acpi-wake-gpe | Data | 6D
- PciRoot(0x0)/Pci(0x2,0x0)
-
Kernel > Add: Sequoia compatible kexts, Lilu.kext in the first place, UTBMap.kext specific for this motherboard
-
Kernel >> Quirks: CustomSMBIOSGuid, DisableIoMapper, DisableIoMapperMapping, DisableLinkeditJettison, PanicNoKextDump and PowerTimeoutKernelPanic = True
-
Kernel >> Quirks: SetApfsTrimTimeout = 0
-
Misc >> Boot: HibernateMode=None, PickerAttributes=144, ShowPicker=True
-
Misc >> Debug: AppleDebug, ApplePanic and DisableWatchDog = True, Target=3
-
Misc >> Security: AllowSetDefault=True, BlacklistAppleUpdate=True, ExposeSensitiveData=6, SecureBootModel=x86legacy
-
NVRAM
- WriteFlash=True
- Add >> 7C436110-AB2A-4BBB-A880-FE41995C9F82:
- boot-args >> agdpmod=pikera
- csr-active-config >> 00000000
- run-efi-updater >> No
- Delete >> 7C436110-AB2A-4BBB-A880-FE41995C9F82:
- boot-args and csr-active-config
-
PlatformInfo
- Generic >> iMac19.1
- UpdateDataHub, UpdateNVRAM and UpdateSMBIOS = True
- UpdateSMBIOSMode >> Custom
-
UEFI >> Quirks: EnableVectorAcceleration and RequestBootVarRouting = True
-
UEFI >> Quirks >> ResizeGpuBars=-1.
Only SMBIOS iMac19.1 model that lacks T2 security chip receives notifications of new updates in System Settings. Rest of the models that have T2 chip are only notified if you add:
- RestrictEvents.kext
revpatch=sbvmmin boot args: it makes macOS believe that it is in a virtual machine and it does not matter which SMBIOS model has a T2 chip.
These settings can be disabled for daily use of the system but you have to re-enable them when you want to be notified of new updates. Another option is to download the full installer package each time, bypassing this limitation but they are large packages of around 15 GB so they are not practical for those who have to update a lot of computers at a time.
You can try the same settings that work in macOS Sonoma. Except for kext versions and what was said about update notification.
- AirportItlwm does not work on Sequoia. itlwm does. Latest version is 2.3.0.
- Heliport (used in conjunction with itlwm) has also been updated to version 1.5.0 alpha which seems to work fine on Sequoia.
- Regarding Bluetooth, latest version 2.4.0 works fine on Sequoia.
Extended instructions:: Intel AX210 wifi6 on macOS Sonoma
OCLP developers have released a beta version that works on Sequoia, it is different from the one we were using on Sonoma.
- Grab AMFIPass version 1.4.1 from here
- Grab IOSkyWalkFamily version 1.2.0 from here
- Grab OCLP beta version 1.6.0 or newer from here (OpenCore-Patcher.pkg).
Other settings are as before: Broadcom wifi back on macOS Sonoma with OCLP.