ipq807x: set network interface names

Set network interface names according to physical port markings. Since this would break networking configs, compat version is set for affected boards along with a message when trying to sysupgrade that it can only be done if not preserving config. Compat version will be dropped once a PR to OpenWrt is made. Signed-off-by: Robert Marko <robimarko@gmail.com>
robimarko · Jan 2, 2023 · 1970ee5 · 1970ee5
1 parent b352ba6
commit 1970ee5
Show file tree

Hide file tree

Showing 10 changed files with 67 additions and 14 deletions.
diff --git a/target/linux/ipq807x/base-files/etc/board.d/01_leds b/target/linux/ipq807x/base-files/etc/board.d/01_leds
@@ -7,19 +7,19 @@ board=$(board_name)
 
 case "$board" in
 edgecore,eap102)
-	ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "eth0"
+	ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
 	;;
 redmi,ax6|\
 xiaomi,ax3600)
-	ucidef_set_led_netdev "wan" "WAN" "blue:network" "eth0"
+	ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
 	;;
 qnap,301w)
-	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
-	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
-	ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "eth2"
-	ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "eth3"
-	ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "eth4"
-	ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "eth5"
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
+	ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
+	ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
+	ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
+	ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
 	;;
 esac
 

diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network
@@ -12,23 +12,23 @@ ipq807x_setup_interfaces()
 
 	case "$board" in
 	dynalink,dl-wrx36)
-		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 		;;
 	edgecore,eap102)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		ucidef_set_interfaces_lan_wan "lan" "wan"
 		;;
 	edimax,cax1800)
-		ucidef_set_interfaces_lan_wan "eth0"
+		ucidef_set_interfaces_lan_wan "lan"
 		;;
 	qnap,301w)
-		ucidef_set_interfaces_lan_wan "eth0 eth1 eth2 eth3 eth4" "eth5"
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
 		;;
 	redmi,ax6|\
 	xiaomi,ax3600)
-		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3" "eth0"
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
 		;;
 	xiaomi,ax9000)
-		ucidef_set_interfaces_lan_wan "eth0 eth1 eth2 eth3" "eth4"
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 		;;
 	*)
 		echo "Unsupported hardware. Network interfaces not initialized"

diff --git a/target/linux/ipq807x/base-files/etc/board.d/05_compat-version b/target/linux/ipq807x/base-files/etc/board.d/05_compat-version
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2022 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	*)
+		ucidef_set_compat_version "1.1"
+		;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8070-cax1800.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8070-cax1800.dts
@@ -591,6 +591,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075>;
 		phy-mode = "sgmii";
+		label = "lan";
 	};
 };
 

diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi
@@ -438,6 +438,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_1>;
 		phy-mode = "sgmii";
+		label = "wan";
 	};
 
 	dp3: dp3 {
@@ -449,6 +450,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_2>;
 		phy-mode = "sgmii";
+		label = "lan1";
 	};
 
 	dp4: dp4 {
@@ -460,6 +462,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_3>;
 		phy-mode = "sgmii";
+		label = "lan2";
 	};
 
 	dp5: dp5 {
@@ -471,6 +474,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_4>;
 		phy-mode = "sgmii";
+		label = "lan3";
 	};
 };
 

diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
@@ -653,6 +653,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8081_28>;
 		phy-mode = "sgmii";
+		label = "wan";
 	};
 
 	dp5: dp5 {
@@ -664,6 +665,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8081_24>;
 		phy-mode = "sgmii";
+		label = "lan";
 	};
 };
 

diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
@@ -731,6 +731,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_16>;
 		phy-mode = "sgmii";
+		label = "lan4";
 	};
 
 	dp2: dp2 {
@@ -742,6 +743,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_17>;
 		phy-mode = "sgmii";
+		label = "lan3";
 	};
 
 	dp3: dp3 {
@@ -753,6 +755,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_18>;
 		phy-mode = "sgmii";
+		label = "lan2";
 	};
 
 	dp4: dp4 {
@@ -764,6 +767,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_19>;
 		phy-mode = "sgmii";
+		label = "lan1";
 	};
 
 	dp5: dp5 {
@@ -775,6 +779,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&aqr113c_8>;
 		phy-mode = "sgmii";
+		label = "10g-1";
 	};
 
 	dp6: dp6 {
@@ -786,6 +791,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&aqr113c_0>;
 		phy-mode = "sgmii";
+		label = "10g-2";
 	};
 };
 

diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
@@ -700,6 +700,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_0>;
 		phy-mode = "sgmii";
+		label = "lan4";
 	};
 
 	dp2: dp2 {
@@ -711,6 +712,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_1>;
 		phy-mode = "sgmii";
+		label = "lan3";
 	};
 
 	dp3: dp3 {
@@ -722,6 +724,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_2>;
 		phy-mode = "sgmii";
+		label = "lan2";
 	};
 
 	dp4: dp4 {
@@ -733,6 +736,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_3>;
 		phy-mode = "sgmii";
+		label = "lan1";
 	};
 
 	dp5: dp5 {
@@ -744,6 +748,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8081>;
 		phy-mode = "sgmii";
+		label = "wan";
 	};
 };
 

diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
@@ -490,6 +490,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8081>;
 		phy-mode = "sgmii";
+		label = "wan";
 	};
 
 	dp2: dp2 {
@@ -501,6 +502,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_3>;
 		phy-mode = "sgmii";
+		label = "lan1";
 	};
 
 	dp3: dp3 {
@@ -512,6 +514,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_2>;
 		phy-mode = "sgmii";
+		label = "lan2";
 	};
 
 	dp4: dp4 {
@@ -523,6 +526,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_1>;
 		phy-mode = "sgmii";
+		label = "lan3";
 	};
 
 	dp5: dp5 {
@@ -534,6 +538,7 @@
 		local-mac-address = [000000000000];
 		phy-handle = <&qca8075_0>;
 		phy-mode = "sgmii";
+		label = "lan4";
 	};
 };
 

diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk
@@ -17,9 +17,15 @@ define Device/UbiFit
 	IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 endef
 
+define Device/IfnameMigration
+	DEVICE_COMPAT_VERSION := 1.1
+	DEVICE_COMPAT_MESSAGE := Network interface names have changed
+endef
+
 define Device/dynalink_dl-wrx36
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(call Device/IfnameMigration)
 	DEVICE_VENDOR := Dynalink
 	DEVICE_MODEL := DL-WRX36
 	BLOCKSIZE := 128k
@@ -33,6 +39,7 @@ TARGET_DEVICES += dynalink_dl-wrx36
 define Device/edgecore_eap102
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(call Device/IfnameMigration)
 	DEVICE_VENDOR := Edgecore
 	DEVICE_MODEL := EAP102
 	BLOCKSIZE := 128k
@@ -47,6 +54,7 @@ TARGET_DEVICES += edgecore_eap102
 define Device/edimax_cax1800
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(call Device/IfnameMigration)
 	DEVICE_VENDOR := Edimax
 	DEVICE_MODEL := CAX1800
 	BLOCKSIZE := 128k
@@ -59,6 +67,7 @@ TARGET_DEVICES += edimax_cax1800
 
 define Device/qnap_301w
 	$(call Device/FitImage)
+	$(call Device/IfnameMigration)
 	DEVICE_VENDOR := QNAP
 	DEVICE_MODEL := 301w
 	DEVICE_DTS_CONFIG := config@hk01
@@ -74,6 +83,7 @@ TARGET_DEVICES += qnap_301w
 
 define Device/redmi_ax6
 	$(call Device/xiaomi_ax3600)
+	$(call Device/IfnameMigration)
 	DEVICE_VENDOR := Redmi
 	DEVICE_MODEL := AX6
 	DEVICE_PACKAGES := ipq-wifi-redmi_ax6
@@ -83,6 +93,7 @@ TARGET_DEVICES += redmi_ax6
 define Device/xiaomi_ax3600
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(call Device/IfnameMigration)
 	DEVICE_VENDOR := Xiaomi
 	DEVICE_MODEL := AX3600
 	BLOCKSIZE := 128k
@@ -96,6 +107,7 @@ TARGET_DEVICES += xiaomi_ax3600
 define Device/xiaomi_ax9000
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(call Device/IfnameMigration)
 	DEVICE_VENDOR := Xiaomi
 	DEVICE_MODEL := AX9000
 	BLOCKSIZE := 128k