ipq807x: enable accelerated crypto drivers

Use ARMv8 Crypto Extensions that IPQ807x supports to provide large speed
bumps for SHA-1, SHA-224, SHA256, AES-128 and AES-256.

Switch QCE to SKCIPHER only as its usually slower than the CPU itself.

Signed-off-by: Robert Marko <robimarko@gmail.com>

target/linux/ipq807x/config-5.15

@@ -1,5 +1,4 @@
 CONFIG_64BIT=y
-CONFIG_AF_UNIX_OOB=y
 # CONFIG_APQ_GCC_8084 is not set
 # CONFIG_APQ_MMCC_8084 is not set
 CONFIG_AQUANTIA_PHY=y
@@ -49,7 +48,6 @@ CONFIG_ARM_PSCI_FW=y
 # CONFIG_ARM_QCOM_CPUFREQ_HW is not set
 # CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
 CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BINARY_PRINTF=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_MQ_PCI=y
@@ -84,20 +82,24 @@ CONFIG_CPU_RMAP=y
 CONFIG_CPU_THERMAL=y
 CONFIG_CRC16=y
 CONFIG_CRC8=y
+CONFIG_CRYPTO_AES_ARM64=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_CRYPTO_AUTHENC=y
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CRYPTD=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_DEV_QCE=y
-CONFIG_CRYPTO_DEV_QCE_AEAD=y
 # CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
-CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
+# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set
 # CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
-# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
-CONFIG_CRYPTO_DEV_QCE_SHA=y
+CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y
 CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
 CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
 CONFIG_CRYPTO_DEV_QCOM_RNG=y
 CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
 CONFIG_CRYPTO_HASH_INFO=y
 CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_LIB_DES=y
@@ -106,7 +108,11 @@ CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
 CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA256_ARM64=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SIMD=y
 CONFIG_CRYPTO_XTS=y
 CONFIG_CRYPTO_ZSTD=y
 CONFIG_DCACHE_WORD_ACCESS=y
@@ -192,7 +198,6 @@ CONFIG_IRQ_WORK=y
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LTO_NONE=y
 CONFIG_LZO_COMPRESS=y
 CONFIG_LZO_DECOMPRESS=y
 CONFIG_MAILBOX=y
@@ -249,7 +254,6 @@ CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_SG_DMA_LENGTH=y
 CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_SELFTESTS=y
-CONFIG_NET_SOCK_MSG=y
 CONFIG_NET_SWITCHDEV=y
 CONFIG_NLS=y
 CONFIG_NO_HZ_COMMON=y