Updated prebuilt images 2022-03-19

Builds

• image: use UTC for zip timestamp #3,#1 (Sungbo Eo)

Commits

• fix USB PHY support #3,#1 (Rafał Miłecki)
• build changes in tools/ on ubuntu/macos #3,#1 (Paul Spooren)
• 68a20d8: tools/quilt: update to 0.67 (Rosen Penev) #3,#1
• add #if guards against 5.4 compile failures #3,#1 (Christian Lamparter)
• add disabled PSTORE+REED_SOLOMON symbols for 5.4 #3,#1 (Christian Lamparter)
• HiveAP-330: add tmp125 temperature sensor #3,#1 (Christian Lamparter)
• Fast 2704n: configure the WAN port #3,#1 (Daniel González Cabanelas)
• geode: fix package nameing kmod-crypto-ebc does not exist #3,#1 (Florian Eckert)
• add Zyxel EMG2926-Q10A #3,#1 (Alex Henrie)
• 65c28d7: scripts/diffconfig.sh: ensure config/conf is built (Eneas U de Queiroz) #3,#1
• mt7621-dts: fix switch@1f warnings #3,#1 (Arınç ÜNAL)
• mt7621-dts: enable flow control on port@6 #3,#1 (Arınç ÜNAL)
• mt7621-dts: add pinctrl properties for ethernet #3,#1 (Arınç ÜNAL)
• update makefile url #3,#1 (Vladislav Grigoryev)
• update to version 2022-02-24 #3,#1 (Petr Štetiar)
• 628970a: tools/meson: update to 0.61.2 (Rosen Penev) #3,#1
• support ZTE MF286A/R #3,#1 (Lech Perczak)
• Increase kernel size to 4 MB for EA8500/EA7500v1 #3,#1 (Hannu Nyman)
• update to 2.28.0 LTS branch #3,#1 (Lucian Cristian)
• remove pm debug features from sama5 kernel config #3,#1 (Claudiu Beznea)
• 64d159c: argp-standalone: add host-compile ability (Sergey V. Lobanov) #3,#1
• e6a4f30: iucode-tool: fix host-compile on macos and non-x86 linux (Sergey V. Lobanov) #3,#1
• intel-microcode: update to 20220207 #3,#1 (Christian Lamparter)
• 73dfc9e: firmware-utils: bump to git HEAD (Stijn Tintel) #3,#1
• support TP-Link EAP615-Wall #3,#1 (Stijn Tintel)
• fix booting with Kernel 5.10 #3,#1 (Paul Spooren)
• switch to Kernel 5.10 #3,#1 (Paul Spooren)
• reduce 'nvmem-cells' definitions on ALFA Network QCA9531 boards #3,#1 (Piotr Dymacz)
• utilize ath9k 'nvmem-cells' on ALFA Network boards #3,#1 (Piotr Dymacz)
• add support for ALFA Network Tube-2HQ #3,#1 (Piotr Dymacz)
• 2d5b596: uboot-envtools: ath79: add support for ALFA Network Tube-2HQ (Piotr Dymacz) #3,#1
• add support for TP-Link Archer A9 v6 #3,#1 (Piotr Dymacz)
• separate packages for kmod-ipt-socket and kmod-ipt-tproxy #3,#1 (Yousong Zhou)
• add kmod-nft-socket #3,#1 (Yousong Zhou)
• add kmod-nft-tproxy #3,#1 (Yousong Zhou)
• 0dc3566: firmware-utils: bump to git HEAD (Stijn Tintel) #3,#1
• 9116096: check-toolchain-clean.sh: fix shellcheck warnings (Petr Štetiar) #3,#1
• 57f7a86: check-toolchain-clean.sh: workaround stray rebuilds (Petr Štetiar) #3,#1
• feed zbt-we1026 external watchdog #3,#1 (Arvid E. Picciani)
• base-files: asrock: fix bootcount include #3,#1 (Petr Štetiar)
• bump to git HEAD #3,#1 (Stijn Tintel)
• fix missing kernel config symbol #3,#1 (Petr Štetiar)
• fix libnftnl/IPTABLES_NFTABLES dependency #3,#1 (Etienne Champetier)
• make mod depend on libxtables #3,#1 (Etienne Champetier)
• move IPTABLES_{CONNLABEL,NFTABLES} to libxtables #3,#1 (Etienne Champetier)
• rename to ip(6)tables-legacy, add PROVIDES #3,#1 (Etienne Champetier)
• move libiptext* to their own packages #3,#1 (Etienne Champetier)
• bump PKG_RELEASE #3,#1 (Etienne Champetier)
• move CONFIG_ASN1 to generic config #3,#1 (John Audia)
• bcm2711: update defconfig #3,#1 (John Audia)
• bcm2710: update defconfig #3,#1 (John Audia)
• aee3594: verbose.mk: print ERROR messages in non-verbose (Paul Spooren) #3,#1
• a947849: image-commands.mk: Use ERROR_MESSAGE for imagesize fails (Paul Spooren) #3,#1
• d6aa9d9: u-boot.mk: add LOCALVERSION (explicitly specify OpenWrt build) (Josef Schlehofer) #3,#1
• use semantic versions for LSDK #3,#1 (Paul Spooren)
• c8b7065: tools/mklibs: update to 0.1.45 (Rosen Penev) #3,#1
• 63e530a: tools/mtools: update to 4.0.37 (Rosen Penev) #3,#1
• 03f5570: tools/cmake: update to 3.22.2 (Rosen Penev) #3,#1
• 2d5f032: tools/ccache: add cmake dependency (Rosen Penev) #3,#1
• 94dd68f: tools/zstd: update to 1.5.2 (Rosen Penev) #3,#1
• c8fdca4: tools/findutils: update to 4.9.0 (Rosen Penev) #3,#1
• 4e13229: tools/expat: update to 2.4.6 (Rosen Penev) #3,#1
• 40f91f6: tools/fakeroot: update to 1.27 (Rosen Penev) #3,#1
• 4a19cf3: tools/mkimage: update to 2022.01 (Huangbin Zhan) #3,#1
• 495c4f4: tools/libressl: update to version 3.4.2 (Josef Schlehofer) #3,#1
• update to 7.15 #3,#1 (Florian Eckert)
• kmod-tcp-scalable: add scalable tcp congestion algorithm #3,#1 (Catalin Toda)
• bump 5.10 to 5.10.101 #3,#1 (John Audia)
• bump 5.10 to 5.10.102 #3,#1 (John Audia)
• 5.10: allocate last level PTEs in high memory #3,#1 (Rui Salvaterra)
• 5.10: remove CONFIG_DEVTMPFS{,_MOUNT} from kconfigs #3,#1 (Rui Salvaterra)
• remove support for mounting /tmp in zram #3,#1 (Rui Salvaterra)
• support "rootfs_data" on U-Boot devices #3,#1 (Rafał Miłecki)
• add PKG_RELEASE #3,#1 (Stijn Tintel)
• bump to git HEAD #3,#1 (Stijn Tintel)
• 545cabe: tools/fakeroot: restore macos bugfix that was dropped during the last update (Felix Fietkau) #3,#1
• fix build errors on FreeBSD 13.0 #3,#1 (Georgi Valkov)
• 0f432fa: uboot-mvebu: backport patch to fix nvme detail crash (Josef Schlehofer) #3,#1
• ef4bf8b: util-linux: add lsns (Oskari Rauta) #3,#1
• bump 5.10 to 5.10.103 #3,#1 (Rui Salvaterra)
• 4393d8c: libnetfilter-conntrack: backport patch fixing compilation with 5.15 (Ansuel Smith) #3,#1
• add support for XMC XM25QH128C #3,#1 (Langhua Ye)
• add support for Ruijie RG-EW3200GX PRO #3,#1 (Langhua Ye)
• d15f9b9: uboot-envtools: mt7622: add support for Ruijie RG-EW3200GX PRO (Langhua Ye) #3,#1
• Remove libxtables from some tc variants #3,#1 (Hauke Mehrtens)
• Add support for TP-Link TL-WPA8631P v3 #3,#1 (Joe Mullally)
• increase spi frequency for Buffalo WCR-1166DS #3,#1 (INAGAKI Hiroshi)
• update MAC address configuration for Buffalo WCR-1166DS #3,#1 (INAGAKI Hiroshi)
• move parser_trx patches of custom magic to generic #3,#1 (INAGAKI Hiroshi)
• backport patch to allow using parser_trx from ramips #3,#1 (INAGAKI Hiroshi)
• switch parser of trx for mt76x8 subtarget #3,#1 (INAGAKI Hiroshi)
• use parser_trx for Buffalo WCR-1166DS #3,#1 (INAGAKI Hiroshi)
• net: dsa: configure better brport flags when ports leave the bridge #3,#1 (Bjørn Mork)
• update to the latest version #3,#1 (Felix Fietkau)
• b3b0a25: toolchain/binutils: remove old versions (Felix Fietkau) #3,#1
• 1b46333: bpf-headers: ship a modified version of stdarg.h from musl to fix ebpf build on glibc (Felix Fietkau) #3,#1
• fix init on CFE devices #3,#1 (Rafał Miłecki)
• baea825: linux-firmware: Update to version 20220209 (Hauke Mehrtens) #3,#1
• update to version 1.0.2 #3,#1 (Josef Schlehofer)
• add support for I-O DATA BSH-G24MB #3,#1 (INAGAKI Hiroshi)
• 9811322: uboot-envtools: add support for I-O DATA BSH-G24MB (INAGAKI Hiroshi) #3,#1
• xrx200: fix use after free bug #3,#1 (Aleksander Jan Bajkowski)
• Add green power LED to Airtight C-75 #3,#1 (Sven Schwermer)
• provide ramoops for R7800/XR500 by default #3,#1 (Hannu Nyman)
• add support for MikroTik RouterBOARD mAP lite #3,#1 (Thibaut VARÈNE)
• fix button labels for WZR-HP-AG300H and WZR-600DHP #3,#1 (Jeffery To)
• add support for Renkforce WS-WN530HP3-A #3,#1 (Birger Koblitz)
• zip: fetch SOURCE_DATE_EPOCH directly #3,#1 (Sungbo Eo)
• zip: make encrypted archives reproducible #3,#1 (Sungbo Eo)
• add support for Asus RT-AC1200 #3,#1 (Ray Wang)
• mt7621: add support for Zbtlink ZBT-WG1608 #3,#1 (Kim Namu)
• fix DEVICE_VENDOR for unbranded devices #3,#1 (Sungbo Eo)
• allow USB power control on TP-Link MR3020v3 #3,#1 (Dmitry Chigiryov)
• binutils: add support for version 2.38 #3,#1 (Rui Salvaterra)
• move logs/ to GITHUB_WORKSPACE #3,#1 (Paul Spooren)
• add iptables-mod-socket #3,#1 (Yousong Zhou)
• wwan: add MeigLink SLM750 modem support #3,#1 (Daniel Golle)
• legacy: enable pata_sis driver #3,#1 (Matthias Schiffer)
• fix USB support #3,#1 (Piotr Dymacz)
• 0d45e1e: uboot-bcm4908: add package with BCM4908 U-Boot (Rafał Miłecki) #3,#1
• include U-Boot in images #3,#1 (Rafał Miłecki)
• set CID during 'query-data-status' operation #3,#1 (Lech Perczak)
• update to git HEAD #3,#1 (Daniel Golle)
• 9851d4b: base-files: call "sync" after initial setup (Rafał Miłecki) #3,#1
• Add support for Dual-Q H721 #3,#1 (Dawsen Gao)
• update WLAN MAC address of Phicomm K2P #3,#1 (Chukun Pan)
• update WLAN MAC address of JCG Y2 #3,#1 (Chukun Pan)
• Add LED labels for Airtight C-75 #3,#1 (Sven Schwermer)
• Apply pinctrl DTS changes to TL-WPA8631P #3,#1 (Joe Mullally)
• 3150e8b: tools/expat: update to 2.4.7 (Rosen Penev) #3,#1
• cca5367: tools/expat: enable DTD (Rosen Penev) #3,#1
• add backport patch for IPv6 nftables ipset-translation #3,#1 (Florian Eckert)
• backport missing init_extensions6() calls #3,#1 (Etienne Champetier)
• 7f92046: tools/mtools: update to 4.0.38 (Rosen Penev) #3,#1
• f88a6da: tools/cmake: update to 3.22.3 (Rosen Penev) #3,#1
• 9a44bc7: tools/fakeroot: update to 1.28 (Rosen Penev) #3,#1
• 9c290ad: tools/ccache: update to 4.6 (Rosen Penev) #3,#1
• bump 5.10 to 5.10.104 #3,#1 (John Audia)
• efc8aff: kernel/modules: add kmod-inet-diag package (Tianling Shen) #3,#1
• add ZyXEL GS1900-24 v1 support #3,#1 (Martin Kennedy)
• enable pca953x driver for rtl838x subtarget #3,#1 (INAGAKI Hiroshi)
• add support for Panasonic Switch-M8eG PN28080K #3,#1 (INAGAKI Hiroshi)
• improve factory.bin for some Senao devices #3,#1 (Michael Pratt)
• add support for Araknis AN-300-AP-I-N #3,#1 (Michael Pratt)
• add support for Araknis AN-500-AP-I-AC #3,#1 (Michael Pratt)
• add support for Araknis AN-700-AP-I-AC #3,#1 (Michael Pratt)
• headers: fix lockdep_assert_not_held() #3,#1 (Petr Štetiar)
• backport DSA patches fixing null-pointer dereference for 5.10 #3,#1 (Marek Behún)
• include CONFIG_KEXEC_SIG in configs #3,#1 (Philip Prindeville)
• update to the latest version #3,#1 (Felix Fietkau)
• 9dbca6b: uboot-bcm4908: use "xxd" from staging_dir (Rafał Miłecki) #3,#1
• 3592aa8: uboot-bcm4908: update to the latest generic (Rafał Miłecki) #3,#1
• f4c2dab: uboot-bcm4908: add BCM4912 build (Rafał Miłecki) #3,#1
• include U-Boot DTB files for ASUS GT-AX6000 & Netgear RAX220 #3,#1 (Rafał Miłecki)
• enable I2C in target kernel config #3,#1 (Stijn Tintel)
• mt7620: Add support for D-Link DWR-961 A1 #3,#1 (Pawel Dembicki)
• add support for Netgear WN3000RPv3 #3,#1 (Rodolphe de Saint Léger)
• fe34001: Revert "ramips: add support for Netgear WN3000RPv3" (Sungbo Eo) #3,#1
• add support for Netgear WN3100RPv2 #3,#1 (Rodolphe de Saint Léger)
• bump to 1.1.1n #3,#1 (Martin Schiller)
• e8a0c55: base-files: Align rootfs_data upgrades to 64KiB on eMMC (Brian Norris) #3,#1
• 80b88b0: argp-standalone: fix compilation with Alpine Linux (Rosen Penev) #3,#1
• add support for Extreme Networks WS-AP3825i #3,#1 (Martin Kennedy)
• fix TP-Link Archer VR2600v bootlooping #3,#1 (Christian Lamparter)
• fritz7362sl: fix SPI flash node reg property #3,#1 (Martin Blumenstingl)
• fritz7362sl: add partition subnode for SPI flash #3,#1 (Jan Hoffmann)
• fix missing kernel config symbol and DTS whitespace issue #3,#1 (Petr Štetiar)
• improve support for GL.iNet GL-XE300 #3,#1 (Pascal Coudurier)
• enable SERIAL_8250_16550A_VARIANTS #3,#1 (Stijn Tintel)
• backport MBSSID support #3,#1 (Felix Fietkau)
• update to standalone bpftools + libbpf, use the latest version #3,#1 (Felix Fietkau)
• fix library path on 64 bit systems #3,#1 (Felix Fietkau)
• update to latest Git head #3,#1 (Josef Schlehofer)
• bcm2711: add kmod-usb-net-lan78xx #3,#1 (Josef Schlehofer)
• 7ca7e0b: cypress-firmware: update it to version 5.4.18-2021_0812 (Josef Schlehofer) #3,#1
• 9586a27: quilt.mk: fix typo in the Host section (Rosen Penev) #3,#1
• rename package to arptables-legacy #3,#1 (Etienne Champetier)
• rename to ebtables-legacy #3,#1 (Etienne Champetier)
• add xtables-legacy package #3,#1 (Etienne Champetier)
• add xtables-nft package #3,#1 (Etienne Champetier)
• add {arp,eb}tables-nft #3,#1 (Etienne Champetier)
• bump PKG_RELEASE #3,#1 (Etienne Champetier)
• bump 5.10 to 5.10.105 #3,#1 (John Audia)
• bump 5.10 to 5.10.106 #3,#1 (John Audia)
• move service command to procd #3,#1 (Florian Eckert)
• 09c41ea: base-files: add wrapper for procd service list command (Florian Eckert) #3,#1
• add support for Beeline SmartBox Flash #3,#1 (Mikhail Zhilkin)
• copy config and patch from 5.10 to 5.15 #3,#1 (Ansuel Smith)
• drop upstream patch for 5.15 #3,#1 (Ansuel Smith)
• qca8k: refresh backport patches for 5.15 kernel #3,#1 (Ansuel Smith)
• rework hack patch for 5.15 #3,#1 (Ansuel Smith)
• rework pending patch for 5.15 #3,#1 (Ansuel Smith)
• standardize tcp_no_window_check pending patch for 5.15 #3,#1 (Ansuel Smith)
• fix affinity warning for qcom target #3,#1 (Ansuel Smith)
• refresh config for kernel 5.15 #3,#1 (Ansuel Smith)
• add support for 5.15 #3,#1 (Ansuel Smith)
• add new module for 5.15 #3,#1 (Ansuel Smith)
• copy config and patch from 5.10 to 5.15 #3,#1 (Ansuel Smith)
• refresh config for kernel 5.15 #3,#1 (Ansuel Smith)
• drop upstream patch for kernel 5.15 #3,#1 (Ansuel Smith)
• add testing kernel version 5.15 #3,#1 (Ansuel Smith)
• rework rootfs conflicts patch for smem #3,#1 (Ansuel Smith)
• backport nand raname to kernel 5.10 #3,#1 (Ansuel Smith)
• fix dedicated krait cpufreq with kernel 5.15 #3,#1 (Ansuel Smith)
• copy config and patch from 5.10 to 5.15 #3,#1 (Ansuel Smith)
• refresh patches for kernel 5.15 #3,#1 (Ansuel Smith)
• refresh config for kernel 5.15 #3,#1 (Ansuel Smith)
• fix wrong nand definition for wpj419 #3,#1 (Ansuel Smith)
• refresh ess driver and phy with new api #3,#1 (Ansuel Smith)
• backport mirror mode and LAG feature for qca8k #3,#1 (Ansuel Smith)
• 5.15: fix new AQR PHY patches #3,#1 (Robert Marko)
• 5.15: fix AQR 113C and 813 #3,#1 (Robert Marko)
• get uImage.FIT partition parser ready for Linux 5.15 #3,#1 (Daniel Golle)
• backport mdio improvement patch for qca8k #3,#1 (Ansuel Smith)
• fix compilation warning for ar8xxx swconfig #3,#1 (Ansuel Smith)
• add Qualcomm Atheros IPQ807x target #3,#1 (Robert Marko)
• add PCIe support #3,#1 (Robert Marko)
• add ath11k-firmware package #3,#1 (Robert Marko)
• add Q6v5 WCSS remoteproc support #3,#1 (Robert Marko)
• generic: 5.15: allow to choose QCOM_QMI_HELPERS #3,#1 (Janusz Dziedzic)
• package Qualcomm QMI Helpers as a module #3,#1 (Robert Marko)
• package MHI bus support #3,#1 (Robert Marko)
• package QRTR support #3,#1 (Robert Marko)
• add ath11k support #3,#1 (Robert Marko)
• add support for built-in WLAN radios #3,#1 (Robert Marko)
• add thermal support #3,#1 (Robert Marko)
• add SPMI PMIC support #3,#1 (Robert Marko)
• add DVFS support #3,#1 (Robert Marko)
• add thermal cooling support #3,#1 (Robert Marko)
• add various clock fixes #3,#1 (Robert Marko)
• add ESS networking DTSI #3,#1 (Robert Marko)
• include u-boot-envtools by default #3,#1 (Robert Marko)
• add Xiaomi AX3600 #3,#1 (Robert Marko)
• add Redmi AX6 #3,#1 (Zhijun You)
• add Edimax CAX1800 #3,#1 (Dirk Buchwalder)
• add QNAP 301w #3,#1 (Robert Marko)
• Add Xiaomi AX9000 #3,#1 (Robert Marko)
• include NSS packages #3,#1 (Robert Marko)
• Use floor ops for SDCC1 clock #3,#1 (Dirk Buchwalder)
• fix ethernet not working after flashing #3,#1 (Robert Marko)
• add support for Edgecore EAP102 #3,#1 (Matthew Hagan)
• add 5.15 based workflow #3,#1 (Robert Marko)
• add BSS CCA support #3,#1 (Robert Marko)
• add random BSS color setting #3,#1 (Robert Marko)
• include SSDK shell by default #3,#1 (Robert Marko)
• tag the images per date #3,#1 (Robert Marko)
• set interface for failsafe #3,#1 (Robert Marko)
• UBI related clock fixes #3,#1 (Robert Marko)
• enable switchdev #3,#1 (Robert Marko)