Release preparation (#112)

* Set version to 1.10.0

* Updated NEWS file

* More updates to NEWS

* Final updates for v1.10.0

* Updated NEWS file

ChangeLog

@@ -1,3 +1,12 @@
+2022-12-10 Roy Hills <royhills@hotmail.com>
+
+	* configure.ac: Set version to 1.10.0.
+
+	* Git: Tagged as 1.10.0
+
+	* ieee-oui.txt: Updated from IEEE website. Total of 47345 MAC/Vendor
+	  mappings.
+
 2022-12-01 Roy Hills <royhills@hotmail.com>
 
 	* arp-scan.h: Make cap_status enum values explicit.
@@ -44,8 +53,8 @@
 	  because not all distros use that name.
 
 	* arp-scan.c, arp-scan.1.dist: Correct the short option letter
-	  for the --macfile option.  It was incorectly showsn as "O"
-	  whan it should be "m".
+	  for the --macfile option.  It was incorectly shown as "O"
+	  when it should be "m".
 
 2022-11-06 Roy Hills <royhills@hotmail.com>
 

NEWS.md

@@ -1,16 +1,15 @@
 **This file gives a brief overview of the major changes between each arp-scan
 release.  For more details please read the ChangeLog file.**
 
-# 2022-MM-DD arp-scan 1.10 (in progress)
+# 2022-12-10 arp-scan 1.10.0 (git tag 1.10.0)
 
 ## New Features
 
 * **POSIX.1e capabilities support for Linux systems with libcap.**
 
   - Uses `CAP_NET_RAW` capability instead of superuser (root) permissions.
-  - May need to install `libcap-dev` or similar to build.
-  - *Note that `libcap` (capabilities) and `libpcap` (packet capture) are
-    different libraries.*
+  - May need `libcap-dev` or similar package to build. *Note that `libcap`
+    (capabilities) and `libpcap` (packet capture) are different libraries.*
   - configure option `--with-libcap`, defaults to auto.
   - Can set capability on exe with: `setcap cap_net_raw+p /path/to/arp-scan`
   - Initially clears effective set completely and clears everything except
@@ -26,12 +25,11 @@ release.  For more details please read the ChangeLog file.**
     except CAP_NET_RAW and proceed as previously, but will remain as UID 0
     and may encounter file permissions issues if it tries to open files with
     e.g. `--pcapsavefile` or `--ouifile` in user directories.
-  - --version displays `Built with libcap POSIX.1e capability support` if
+  - `--version` displays `Built with libcap POSIX.1e capability support` if
     enabled.
-  - Adapted from the iputils-ping capabilities code.
   - `make install` installs the arp-scan executable with the `CAP_NET_RAW`
-     capability if `setcap` is available and works. Otherwise will fallback to
-     SUID.
+    capability if `setcap` is available and works. Otherwise will fallback to
+    SUID. See `install-exec-hook` in `Makefile.am` for details.
 
 * **--format option allows flexible output format.**
 
@@ -40,55 +38,37 @@ release.  For more details please read the ChangeLog file.**
   - XML: `<host><ip>${ip}</ip><mac>${mac}</mac><vendor>${vendor}</vendor></host>`
   - JSON: `{"ipAddress":"${ip}", "macAddress":"${mac}", "vendor":"${vendor}"},`
   - See the arp-scan manpage for details of field names and more examples.
-  - Fields code adapted from the Debian dpkg-query showformat option.
 
 * **Mac/Vendor mapping file changes.**
 
-  - ieee-oui.txt now holds data for all IEEE registries: MA-L (OUI), MA-M,
+  - `ieee-oui.txt` now holds data for all IEEE registries: MA-L (OUI), MA-M,
     MA-S (OUI36) and IAB.
-  - ieee-iab.txt file and --iabfiles option have been removed.
-  - get-oui now updates ieee-oui.txt from all registries. get-iab has been
+  - `ieee-iab.txt` file and `--iabfile` option have been removed.
+  - `get-oui` now updates `ieee-oui.txt` from all registries. `get-iab` has been
     removed.
-  - get-oui requires Perl module Text::CSV as it now uses the IEEE .csv files
-    instead of the .txt files.
-  - get-oui can be edited to use the data from the Debian ieee-data package.
-  - mac-vendor.txt is now installed to `$(sysconfdir)/$(PACKAGE)` instead of
+  - `get-oui` requires Perl module `Text::CSV` as it now uses the IEEE .csv
+    files instead of the .txt files.
+  - `get-oui` can be edited to use the data from the Debian `ieee-data` package.
+  - `mac-vendor.txt` is now installed to `$(sysconfdir)/$(PACKAGE)` instead of
     `$(pkgdatadir)`. E.g. `/usr/local/etc/arp-scan` if ./configured with no
     directory options, or `/etc/arp-scan` with `--sysconfdir=/etc`. This is to
     permit local changes to persist across upgrades.
 
 ## General improvements
 
-* Put man pages and --help output on a diet. Updated for new options.
+* Put man pages and `--help` output on a diet. Updated for new options.
 * Option value length is now limited only by the maximum command line
   length (normally around 100K). This allows for complex `--format` options,
   long `--padding` lengths etc.
 * arp-scan now prints a brief error message instead of half a page of usage
   text for unknown options.
 
-## Package Maintainers Notes
-
-* If you are packaging for Linux please build with libcap POSIX.1e capability
-  support if your distribution allows it.
-
-* If you are packaging for a Debian based system, the `get-oui` Perl script can
-  easily be patched to use the Debian `ieee-data` package.
-
-* The `get-iab` script and the `ieee-iab.txt` file have been removed from this
-  version.
-
-* The `mac-vendor.txt` file has been moved to `$(sysconfdir)/$(PACKAGE)` as
-  detailed above. Users may make local changes to this file and upstream
-  changes should be infrequent.
-
-* If you have any problems packaging arp-scan, please open an issue on github.
-
 # 2022-10-08 arp-scan 1.9.8 (git tag 1.9.8)
 
 * New Features:
 
-  - Allow the use of Linux IP aliases such as eth0:0 for the interface name.
-  - Permit regular MAC addresses e.g. 00:0c:29:b9:43:1b in mac-vendor.txt.
+  - Allow the use of Linux IP aliases such as `eth0:0` for the interface name.
+  - Permit regular MAC addresses e.g. `00:0c:29:b9:43:1b` in `mac-vendor.txt`.
   - `--limit=n` option exits after n of hosts have responded, exit 1 for <n
   - `--resolve` option to resolve responding IP addresses to hostnames
 
@@ -148,7 +128,7 @@ release.  For more details please read the ChangeLog file.**
   reception of packets with spoofed MAC source address. Thanks to tissieres
   for the pull request.
 
-* Use the libpcap 1.0 API functions pcap_create() instead of pcap_open_live().
+* Use the libpcap 1.0 API functions `pcap_create()` instead of `pcap_open_live()`.
   This means that arp-scan now requires libpcap 1.0 or later and will not work
   with earlier libpcap versions.
 
@@ -159,11 +139,11 @@ release.  For more details please read the ChangeLog file.**
 
 # 2013-11-24 arp-scan 1.9.2
 
-* Added new --plain (-x) option to suppress printing of header and footer text,
+* Added new `--plain` `(-x)` option to suppress printing of header and footer text,
   and only display one output line for each responding host. Idea from Stefan
   Tomanek's arp-scan fork on github at https://github.com/wertarbyte/arp-scan.
 
-* Use LWP::UserAgent instead of LWP::Simple in get-oui and get-iab to enable
+* Use `LWP::UserAgent` instead of `LWP::Simple` in get-oui and get-iab to enable
   the raw content to be obtained, which avoids Unicode/UTF-8 issues.
 
 * Added arp-fingerprint patterns for WIZnet W5100 and Cisco IOS 15.0.

configure.ac

@@ -1,6 +1,6 @@
 dnl Process this file with autoconf to produce a configure script.
 
-AC_INIT([arp-scan],[1.10-rc1],[https://github.com/royhills/arp-scan])
+AC_INIT([arp-scan],[1.10.0],[https://github.com/royhills/arp-scan])
 AC_PREREQ([2.69])
 AC_CONFIG_SRCDIR([arp-scan.c])
 AC_CONFIG_AUX_DIR([build-aux])