Swap xy and mirror not supported by build in / rom driver (#148)

* Prepared new version 2.0.4

* Updated boards

* Updated platformio.ini

* Added extern for touch_calibration_data

* New build system for CI

* Updated PCLK_HZ

* UPdated variables for ST7789

* Update Variables GC9A01

* Updated ILI9341

* LVGL to ^8.3.9

* Typos

* DST7262 variables

* Typos and ST7701 variables

* ST7701_LINE_CONFIG

* ST7796 variables

* SPI_DMA_CHANNEL

* CST816S variables

* GT911 variables

* XPT2046 variables

* Typo

* esp_lcd_panel_io_3wire_spi_config_t

* Updated boards

* Updated boards

* BOARD_HAS_

* Update board

* rename with interfaces

* Added Interface type to boards for LCD/TOUCH

* All boards

* wip ESP32-24232s022

* Updated 2432S022C

* Updated boards
Added warning for st7789_i80

* Added 8048S070R

* Updated boards

* Do not invert colors

* Added IPS Setting

* rename, include strength

* Removed v11 version

* Added logging

* logging

* Removed touch_config flags

* Removed not required backlight set

* Added strength

* GT911, fix for non matching touch resolutions

* UPdated boards

* Updated boards

* GT911 vendorId

* updated boards

* Update board

* Boards to main

* Updated boards

* UPdate boards

* %d->%f

* Added logging for vendor config initialization

* Two decimals

* Updated boards

* Data bits are upper D8-D15

* Updated boards

* Updated boards

* Added PlatformIo badge

* Use LVGL pixel buffer size and malloc flags for json (#124)

* Updated boards

* Added spi_bus_config_t flags, intr flags and max_size

* Small changes esp3228S022

* Update version to 2.0.5

* Minor changes to st7789_i80

* BCKL to GPIO_BCKL

* Typo miso_io_num

* Changed location of tuning off the display when initializing

* Updated boards

* Updated boards

* 21-nothing-shown-on-screen-only-backlight

* Updated boards to current develop

* Do not check for information GT911

* Reenabled reading GTInfo: is required for resolution

* Attempt to read GTInfo else use defaults

* Updated boards

* Updated boards + library version

* Set PWM frtequency to 400Hz

* New xpt2046 driver

* Invert if IPS

* Removed settings for XPT2046

* Fixed typo ptr in logging
Updated boards/platformio.ini

* Work in progress GT911

* Update for gt911

* Corrected rot swap touch

* Move esp_lcd_touch to library

* Updated defines

* Updated boards

* Test for all boards

* Flags not yet!

* Added export/exclude

* Updated glob

* Updated exclude globs

* Moved touch libraries back in esp32-smartdisplay

* Updated touch

* Work in progress gc9a01

* Move addressed I2C to header

* Added logging

* Readded io_expander.c

* Disabled reading info from gt911. Seems to cause problems

* fixes

* Typo refactor

* calloc fix!

* fixed for touch

* Typo

* Fixes

* Fixes

* fixes

* fixes

* st7796

* parameter checking for touch

* Fixes

* Fixes

* fixes

* VendorConfig

* Remove cmd/cmds_size

* Fixed

* Fixes

* Test

* Update boards

* 7701

* Fixes

* fixes

* Fixes rotation

* lcd mirror conditional

* TOUCH_SWAP_XY TOUCH_MIRROR_XY

* All platforms

* Bugfix for more points than configured

* Updated MD/boards/platformio.ini

* Updated boards

* Updated boards

* Updated boards

* Updated MD

* Display rotation not working (#145)

* rotation test

* Corrected rotation

* LCD->DISPLAY

* Updated boards

* GAP_X/GAP_Y

* All boards

* Updated boards

* Update to 2.0.9

* Not supported on buildin driver

src/lvgl_panel_st7262_par.c

@@ -76,7 +76,7 @@ void lvgl_lcd_init(lv_disp_drv_t *drv)
     ESP_ERROR_CHECK(esp_lcd_panel_swap_xy(panel_handle, DISPLAY_SWAP_XY));
 #endif
 #if defined(DISPLAY_MIRROR_X) || defined(DISPLAY_MIRROR_Y)    
-    ESP_ERROR_CHECK(esp_lcd_panel_mirror(panel_handle, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y));
+    //ESP_ERROR_CHECK(esp_lcd_panel_mirror(panel_handle, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y));
 #endif    
 #if defined(DISPLAY_GAP_X) || defined(DISPLAY_GAP_Y)
     ESP_ERROR_CHECK(esp_lcd_panel_set_gap(panel_handle, DISPLAY_GAP_X, DISPLAY_GAP_Y));