Skip to content

Commit

Permalink
Moved settings to board definitions
Browse files Browse the repository at this point in the history
  • Loading branch information
rzeldent committed Dec 12, 2023
1 parent f783d70 commit c9b7013
Show file tree
Hide file tree
Showing 26 changed files with 1,665 additions and 11 deletions.
56 changes: 49 additions & 7 deletions README.md
Original file line number Diff line number Diff line change
Expand Up @@ -57,11 +57,15 @@ They can be bought in the [Sunton Store](https://www.aliexpress.com/store/110019
| ESP32-2432S032C | ESP32-WROOM-32 | 4Mb | n/a | 2 x 240Mhz | 240x320 | 3.2" | [ST7796](assets/datasheets/ST7796.pdf) | [GT911](assets/datasheets//GT911.pdf) | yes | [W25Q32JV](assets/datasheets/25Q32JVSSIQ.pdf) | yes | yes | [Ali Express](https://www.aliexpress.com/item/1005006224494145.html) |
| ESP32-3248S035R | ESP32-WROOM-32 | 4Mb | n/a | 2 x 240Mhz | 320x480 | 3.5" | [ST7796](assets/datasheets/ST7796.pdf) | [XPT2046](assets/datasheets/XPT2046.pdf) | yes | [W25Q32JV](assets/datasheets/25Q32JVSSIQ.pdf) | yes | yes | [Ali Express](https://www.aliexpress.com/item/1005004632953455.html) |
| ESP32-3248S035C | ESP32-WROOM-32 | 4Mb | n/a | 2 x 240Mhz | 320x480 | 3.5" | [ST7796](assets/datasheets/ST7796.pdf) | [GT911](assets/datasheets//GT911.pdf) | yes | [W25Q32JV](assets/datasheets/25Q32JVSSIQ.pdf) | yes | yes | [Ali Express](https://www.aliexpress.com/item/1005004632953455.html) |
| ESP32-4827S043R | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 480x272 | 4.3" | Direct 16 bits parallel GPIO | [XPT2046](assets/datasheets/XPT2046.pdf) | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005006110360174.html) |
| ESP32-4827S043C | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 480x272 | 4.3" | Direct 16 bits parallel GPIO | [GT911](assets/datasheets//GT911.pdf) | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005006110360174.html) |
| ESP32-4827S043R | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 480x272 | 4.3" | Direct 16 bits parallel GPIO | [XPT2046](assets/datasheets/XPT2046.pdf) | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005004788147691.html) |
| ESP32-4827S043C | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 480x272 | 4.3" | Direct 16 bits parallel GPIO | [GT911](assets/datasheets//GT911.pdf) | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005004788147691.html) |
| ESP32-8048S043N | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 800x480 | 4.3" | Direct 16 bits parallel GPIO | n/a | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005006110360174.html) |
| ESP32-8048S043R | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 800x480 | 4.3" | Direct 16 bits parallel GPIO | [XPT2046](assets/datasheets/XPT2046.pdf) | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005006110360174.html) |
| ESP32-8048S043C | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 800x480 | 4.3" | Direct 16 bits parallel GPIO | [GT911](assets/datasheets//GT911.pdf) | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005006110360174.html) |
| ESP32-8048S050N | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 800x480 | 5.0" | Direct 16 bits parallel GPIO | n/a | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005005938915207.html) |
| ESP32-8048S050C | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 800x480 | 5.0" | Direct 16 bits parallel GPIO | [GT911](assets/datasheets//GT911.pdf) | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005005938915207.html) |
| ESP32-8048S070N | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 800x480 | 7.0" | Direct 16 bits parallel GPIO | n/a | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005005928865239.html) |
| ESP32-8048S050R | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 800x480 | 5.0" | Direct 16 bits parallel GPIO | [XPT2046](assets/datasheets/XPT2046.pdf) | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005005938915207.html) |
| ESP32-8048S070N | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 800x480 | 7.0" | Direct 16 bits parallel GPIO | n/a | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005005928865239.htmlhttps://www.aliexpress.com/item/1005005928865239.html) |
| ESP32-8048S070C | ESP32-S3-WROOM-1-MCN16R8 | 16Mb | 8Mb | 2 x 240Mhz | 800x480 | 7.0" | Direct 16 bits parallel GPIO | [GT911](assets/datasheets//GT911.pdf) | no | no | no | no | [Ali Express](https://www.aliexpress.com/item/1005005928865239.html) |

>[!IMPORTANT]
Expand All @@ -88,6 +92,7 @@ Additionally this demo provides:
- Sound over I2S and internal DAC
- Read the CDR (light sensor)
- Control of the LEDs
- PlatformIO definitions for all the known boards
- Full source code

The next sections will guide you though the process of creating an application. However, knowledge of PlatformIO, C/C++ and LVGL is required!
Expand All @@ -102,10 +107,11 @@ This library is made for usage in PlatformIO. If not familiar with PlatformIO pl
Make sure you have PlatformIO installed and functional. Follow the documentation on their site:
[https://docs.platformio.org/en/latest/](https://docs.platformio.org/en/latest/)

Board definitions are in the directory ```boards```. This is done because some boards use an ESP32-S3 with **16Mb flash and 8Mb PSRAM**. There is no definition for this board in the standard PlatformIO boards selection.
Additionally, each board has definitions of the GPIO RGB LEDs, CDR sensor GPIO IO ports and other settings.

>[!IMPORTANT]
>Some boards use an ESP32-S2 with **16Mb flash and 8Mb PSRAM**. There is no definition for this board in the standard PlatformIO boards selection.
>
>To be able to use these boards copy the [board definition](assets/boards/esp32-s3-devkitc-1-n16-psram.json) from the ```assets/boards/esp32-s3-devkitc-1-n16-psram.json``` to the ```.platformio\platforms\espressif32\boards``` directory.
>To be able to use these boards copy the board definitions from the [```boards/```](boards/) to the ```.platformio\platforms\espressif32\boards``` directory.
>The ```.platformio``` directory can be found under ```C:\Users\<user>``` (Windows) or ```/home/<user>``` (Linux).
### Step 2: Create a new project
Expand Down Expand Up @@ -279,6 +285,42 @@ If there are problems:
- Refer to the [discussions](https://github.com/rzeldent/esp32-smartdisplay/discussions)
- If all fails, submit an [issue](https://github.com/rzeldent/esp32-smartdisplay/issues) but there are no guarantees as this is done in my spare time.

## More on board defines

The boards definitions also contain information about the hardware available.

| Define | Explanation |
|--- |--- |
| PUSHBUTTON_BOOT | GPIO of the BOOT pushbutton |
| TF_PIN_CS | GPIO of the CS of the TF card |
| TF_PIN_MOSI | GPIO of the MOSI of the TF card |
| TF_PIN_SCLK | GPIO of the SCLK of the TF card |
| TF_PIN_MISO | GPIO of the MISO of the TF card |
| TFT_WIDTH | The width of the panel |
| TFT_HEIGHT | The height of the panel |
| PIN_BCKL | The backlight GPIO pin |
| USES_ST7789 | Uses the ST7789 display driver |
| ST7789_SPI_HOST | The SPI host to use for the ST7789 |
| ST7789_SPI_BUS_CONFIG | The ST7789 SPI BUS configuration |
| ST7789_IO_SPI_CONFIG | The ST7789 IO SPI configuration |
| ST7789_PANEL_DEV_CONFIG | The ST7789 Panel device configuration |
| PANEL_SWAP_XY | Swap the panel for LV_DISP_ROT_NONE |
| PANEL_MIRROR_X | Mirror the panel horizontally for LV_DISP_ROT_NONE |
| PANEL_MIRROR_Y | Mirror the panel vertically for LV_DISP_ROT_NONE |
| PANEL_GAP_X | The horizontal gap before the panel starts |
| PANEL_GAP_Y | The vertical gap before the panel starts |
| USES_GT911 | Uses the GT911 capacitive touch controller |
| GT911_I2C_HOST | The GT11 I2C host to user for the GT911 |
| GT911_I2C_CONFIG | The GT11 I2C configuration |
| GT911_IO_I2C_CONFIG | The GT11 IO I2C configuration |
| GT911_TOUCH_CONFIG | The GT11 touch configuration |
| TOUCH_ROT_SWAP_X | Swap the touch horizontally for for LV_DISP_ROT_NONE |
| TOUCH_ROT_SWAP_Y | Swap the touch vertically for for LV_DISP_ROT_NONE |





## More on LVGL.h

To use the LVGL library, a `lv_conf.h` file is required to define the settings for LVGL.
Expand Down Expand Up @@ -444,7 +486,7 @@ The value ranges from 75mV (not covered) to 400mV (completely covered).
>[!NOTE]
>Not all boards have a LED. Refer to the [supported boards](#supported-boards) to see if this is available.
An 8 &Omega; speaker can be connected to the SPEAK pin. This is a 1.25 JST connector.
An 8&Omega; speaker can be connected to the SPEAK pin. This is a 1.25 JST connector.
Beeps can be generated by generating a PWM signal on the SPEAK pin:

```c++
Expand Down
73 changes: 73 additions & 0 deletions boards/ESP32-1732S019C.json
Original file line number Diff line number Diff line change
@@ -0,0 +1,73 @@
{
"build": {
"arduino": {
"ldscript": "esp32s3_out.ld",
"partitions": "default_16MB.csv",
"memory_type": "qio_opi"
},
"core": "esp32",
"extra_flags": [
"-DARDUINO_ESP32S3_DEV",
"-DBOARD_HAS_PSRAM",
"-DARDUINO_USB_MODE=1",
"-DARDUINO_RUNNING_CORE=1",
"-DARDUINO_EVENT_RUNNING_CORE=1",
"-DARDUINO_USB_CDC_ON_BOOT=0",
"-DESP32_1732S019C",
"-DTFT_WIDTH=170",
"-DTFT_HEIGHT=320",
"-DPIN_BCKL=14",
"-DUSES_ST7789",
"-DST7789_SPI_HOST=SPI2_HOST",
"-DST7789_SPI_BUS_CONFIG={.mosi_io_num=13,.sclk_io_num=12,.quadwp_io_num=-1,.quadhd_io_num=-1}",
"-DST7789_IO_SPI_CONFIG={.cs_gpio_num=10,.dc_gpio_num=11,.spi_mode=SPI_MODE0,.pclk_hz=24000000,.trans_queue_depth=10,.lcd_cmd_bits=8,.lcd_param_bits=8}",
"-DST7789_PANEL_DEV_CONFIG={.reset_gpio_num=1,.color_space=ESP_LCD_COLOR_SPACE_RGB,.bits_per_pixel=16}",
"-DPANEL_SWAP_XY=false",
"-DPANEL_MIRROR_X=false",
"-DPANEL_MIRROR_Y=false",
"-DPANEL_GAP_X=35",
"-DPANEL_GAP_Y=0",
"-DUSES_GT911",
"-DGT911_I2C_HOST=0",
"-DGT911_I2C_CONFIG={.mode=I2C_MODE_MASTER,.sda_io_num=9,.scl_io_num=46,.sda_pullup_en=GPIO_PULLUP_ENABLE,.scl_pullup_en=GPIO_PULLUP_ENABLE,.master={.clk_speed=400000}}",
"-DGT911_IO_I2C_CONFIG={.dev_addr=ESP_LCD_TOUCH_IO_I2C_GT911_ADDRESS,.control_phase_bytes=1,.lcd_cmd_bits=16,.flags={.disable_control_phase=1}}",
"-DGT911_TOUCH_CONFIG={.x_max=TFT_WIDTH,.y_max=TFT_HEIGHT,.rst_gpio_num=GPIO_NUM_3,.int_gpio_num=GPIO_NUM_8}",
"-DTOUCH_ROT_SWAP_X=false",
"-DTOUCH_ROT_SWAP_Y=false",
"-DPUSHBUTTON_BOOT=0"
],
"f_cpu": "240000000L",
"f_flash": "80000000L",
"flash_mode": "qio",
"hwids": [
[
"0x303A",
"0x1001"
]
],
"mcu": "esp32s3",
"variant": "esp32s3"
},
"connectivity": [
"wifi"
],
"debug": {
"openocd_target": "esp32s3.cfg"
},
"frameworks": [
"arduino",
"espidf"
],
"name": "ESP32-1732S019C",
"upload": {
"flash_size": "16MB",
"maximum_ram_size": 327680,
"maximum_size": 16777216,
"use_1200bps_touch": true,
"wait_for_upload_port": true,
"require_upload_port": true,
"speed": 460800
},
"url": "https://www.aliexpress.com/item/1005005059421229.html",
"vendor": "Sunton"
}
Original file line number Diff line number Diff line change
Expand Up @@ -12,7 +12,22 @@
"-DARDUINO_USB_MODE=1",
"-DARDUINO_RUNNING_CORE=1",
"-DARDUINO_EVENT_RUNNING_CORE=1",
"-DARDUINO_USB_CDC_ON_BOOT=0"
"-DARDUINO_USB_CDC_ON_BOOT=0",
"-DESP32_1732S019N",
"-DTFT_WIDTH=170",
"-DTFT_HEIGHT=320",
"-DPIN_BCKL=14",
"-DUSES_ST7789",
"-DST7789_SPI_HOST=SPI2_HOST",
"-DST7789_SPI_BUS_CONFIG={.mosi_io_num=13,.sclk_io_num=12,.quadwp_io_num=-1,.quadhd_io_num=-1}",
"-DST7789_IO_SPI_CONFIG={.cs_gpio_num=10,.dc_gpio_num=11,.spi_mode=SPI_MODE0,.pclk_hz=24000000,.trans_queue_depth=10,.lcd_cmd_bits=8,.lcd_param_bits=8}",
"-DST7789_PANEL_DEV_CONFIG={.reset_gpio_num=1,.color_space=ESP_LCD_COLOR_SPACE_RGB,.bits_per_pixel=16}",
"-DPANEL_SWAP_XY=false",
"-DPANEL_MIRROR_X=false",
"-DPANEL_MIRROR_Y=false",
"-DPANEL_GAP_X=35",
"-DPANEL_GAP_Y=0",
"-DPUSHBUTTON_BOOT=0"
],
"f_cpu": "240000000L",
"f_flash": "80000000L",
Expand All @@ -36,7 +51,7 @@
"arduino",
"espidf"
],
"name": "Espressif ESP32-S3-DevKitC-1-N16R8V (16 MB QD, With PSRAM)",
"name": "ESP32-1732S019N",
"upload": {
"flash_size": "16MB",
"maximum_ram_size": 327680,
Expand All @@ -46,6 +61,6 @@
"require_upload_port": true,
"speed": 460800
},
"url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
"vendor": "Espressif"
"url": "https://www.aliexpress.com/item/1005005059421229.html",
"vendor": "Sunton"
}
57 changes: 57 additions & 0 deletions boards/ESP32-2424S012C.json
Original file line number Diff line number Diff line change
@@ -0,0 +1,57 @@
{
"build": {
"arduino": {
"ldscript": "esp32c3_out.ld"
},
"core": "esp32",
"f_cpu": "160000000L",
"f_flash": "80000000L",
"flash_mode": "qio",
"extra_flags": [
"-DARDUINO_ESP32C3_DEV",
"-DESP32_2424S012C",
"-DTFT_WIDTH=240",
"-DTFT_HEIGHT=240",
"-DPIN_BCKL=3",
"-DUSES_GC9A01",
"-DGC9A01_SPI_HOST=SPI2_HOST",
"-DGC9A01_SPI_BUS_CONFIG={.mosi_io_num=7,.miso_io_num=-1,.sclk_io_num=6,.quadwp_io_num=-1,.quadhd_io_num=-1}",
"-DGC9A01_IO_SPI_CONFIG={.cs_gpio_num=10,.dc_gpio_num=2,.spi_mode=SPI_MODE0,.pclk_hz=80000000,.trans_queue_depth=10,.lcd_cmd_bits=8,.lcd_param_bits=8}",
"-DGC9A01_PANEL_DEV_CONFIG={.reset_gpio_num=-1,.color_space=ESP_LCD_COLOR_SPACE_BGR,.bits_per_pixel=16}",
"-DPANEL_SWAP_XY=false",
"-DPANEL_MIRROR_X=true",
"-DPANEL_MIRROR_Y=false",
"-DUSES_CST816S",
"-DCST816S_I2C_HOST=0",
"-DCST816S_I2C_CONFIG={.mode=I2C_MODE_MASTER,.sda_io_num=4,.scl_io_num=5,.sda_pullup_en=GPIO_PULLUP_ENABLE,.scl_pullup_en=GPIO_PULLUP_ENABLE,.master={ .clk_speed=400000}}",
"-DCST816S_IO_I2C_CONFIG={.dev_addr=ESP_LCD_TOUCH_IO_I2C_CST816S_ADDRESS,.control_phase_bytes=1,.lcd_cmd_bits=8,.flags={.disable_control_phase=1}}",
"-DCST816S_TOUCH_CONFIG={.x_max=TFT_WIDTH,.y_max=TFT_HEIGHT,.rst_gpio_num=GPIO_NUM_1,.int_gpio_num=GPIO_NUM_0}",
"-DTOUCH_ROT_SWAP_X false",
"-DTOUCH_ROT_SWAP_Y false",
"-DPUSHBUTTON_BOOT=0"
],
"mcu": "esp32c3",
"variant": "esp32c3"
},
"connectivity": [
"wifi",
"bluetooth"
],
"debug": {
"openocd_target": "esp32c3.cfg"
},
"frameworks": [
"arduino",
"espidf"
],
"name": "ESP32-2424S012C",
"upload": {
"flash_size": "4MB",
"maximum_ram_size": 327680,
"maximum_size": 4194304,
"require_upload_port": true,
"speed": 460800
},
"url": "https://www.aliexpress.com/item/1005005453515690.html",
"vendor": "Sunton"
}
50 changes: 50 additions & 0 deletions boards/ESP32-2424S012N.json
Original file line number Diff line number Diff line change
@@ -0,0 +1,50 @@
{
"build": {
"arduino": {
"ldscript": "esp32c3_out.ld"
},
"core": "esp32",
"f_cpu": "160000000L",
"f_flash": "80000000L",
"flash_mode": "qio",
"extra_flags": [
"-DARDUINO_ESP32C3_DEV",
"-DESP32_2424S012N",
"-DTFT_WIDTH=240",
"-DTFT_HEIGHT=240",
"-DPIN_BCKL=3",
"-DUSES_GC9A01",
"-DGC9A01_SPI_HOST=SPI2_HOST",
"-DGC9A01_SPI_BUS_CONFIG={.mosi_io_num=7,.miso_io_num=-1,.sclk_io_num=6,.quadwp_io_num=-1,.quadhd_io_num=-1}",
"-DGC9A01_IO_SPI_CONFIG={.cs_gpio_num=10,.dc_gpio_num=2,.spi_mode=SPI_MODE0,.pclk_hz=80000000,.trans_queue_depth=10,.lcd_cmd_bits=8,.lcd_param_bits=8}",
"-DGC9A01_PANEL_DEV_CONFIG={.reset_gpio_num=-1,.color_space=ESP_LCD_COLOR_SPACE_BGR,.bits_per_pixel=16}",
"-DPANEL_SWAP_XY=false",
"-DPANEL_MIRROR_X=true",
"-DPANEL_MIRROR_Y=false",
"-DPUSHBUTTON_BOOT=0"
],
"mcu": "esp32c3",
"variant": "esp32c3"
},
"connectivity": [
"wifi",
"bluetooth"
],
"debug": {
"openocd_target": "esp32c3.cfg"
},
"frameworks": [
"arduino",
"espidf"
],
"name": "ESP32-2424S012N",
"upload": {
"flash_size": "4MB",
"maximum_ram_size": 327680,
"maximum_size": 4194304,
"require_upload_port": true,
"speed": 460800
},
"url": "https://www.aliexpress.com/item/1005005453515690.html",
"vendor": "Sunton"
}
72 changes: 72 additions & 0 deletions boards/ESP32-2432S024C.json
Original file line number Diff line number Diff line change
@@ -0,0 +1,72 @@
{
"build": {
"arduino":{
"ldscript": "esp32_out.ld"
},
"core": "esp32",
"extra_flags": [
"-DARDUINO_ESP32_DEV",
"-DESP32_2432S024C",
"-DTFT_WIDTH=240",
"-DTFT_HEIGHT=320",
"-DPIN_BCKL=27",
"-DUSES_ILI9341",
"-DILI9341_SPI_HOST=SPI2_HOST",
"-DILI9341_SPI_BUS_CONFIG={.mosi_io_num=13,.miso_io_num=12,.sclk_io_num=14,.quadwp_io_num=-1,.quadhd_io_num=-1}",
"-DILI9341_IO_SPI_CONFIG={.cs_gpio_num=15,.dc_gpio_num=2,.spi_mode=SPI_MODE0,.pclk_hz=24000000,.trans_queue_depth=10,.lcd_cmd_bits=8,.lcd_param_bits=8}",
"-DILI9341_PANEL_DEV_CONFIG={.reset_gpio_num=-1,.color_space=ESP_LCD_COLOR_SPACE_BGR,.bits_per_pixel=16}",
"-DPANEL_SWAP_XY=false",
"-DPANEL_MIRROR_X=true",
"-DPANEL_MIRROR_Y=false",
"-DUSES_CST816S",
"-DCST816S_I2C_HOST=0",
"-DCST816S_I2C_CONFIG={.mode=I2C_MODE_MASTER,.sda_io_num=33,.scl_io_num=32,.sda_pullup_en=GPIO_PULLUP_ENABLE,.scl_pullup_en=GPIO_PULLUP_ENABLE,.master={.clk_speed=400000}}",
"-DCST816S_IO_I2C_CONFIG={.dev_addr=ESP_LCD_TOUCH_IO_I2C_CST816S_ADDRESS,.control_phase_bytes=1,.lcd_cmd_bits=8,.flags={.disable_control_phase=1}}",
"-DCST816S_TOUCH_CONFIG={.x_max=TFT_WIDTH,.y_max=TFT_HEIGHT,.rst_gpio_num=GPIO_NUM_25,.int_gpio_num=GPIO_NUM_NC}",
"-DTOUCH_ROT_SWAP_X=false",
"-DTOUCH_ROT_SWAP_Y=false",
"-DPUSHBUTTON_BOOT=0",
"-DHAS_TF",
"-DTF_PIN_CS=5",
"-DTF_PIN_MOSI=23",
"-DTF_PIN_SCLK=18",
"-DTF_PIN_MISO=19",
"-DHAS_RGB_LED",
"-DLED_PIN_R=4",
"-DLED_PIN_G=16",
"-DLED_PIN_B=17",
"-DHAS_CDR",
"-DCDR_IN=34",
"-DHAS_SPEAKER",
"-DSPEAKER_PIN=26"
],
"f_cpu": "240000000L",
"f_flash": "40000000L",
"flash_mode": "dio",
"mcu": "esp32",
"variant": "esp32"
},
"connectivity": [
"wifi",
"bluetooth",
"ethernet",
"can"
],
"debug": {
"openocd_board": "esp-wroom-32.cfg"
},
"frameworks": [
"arduino",
"espidf"
],
"name": "ESP32_2432S024C",
"upload": {
"flash_size": "4MB",
"maximum_ram_size": 327680,
"maximum_size": 4194304,
"require_upload_port": true,
"speed": 460800
},
"url": "https://www.aliexpress.com/item/1005005865107357.html",
"vendor": "Sunton"
}
Loading

0 comments on commit c9b7013

Please sign in to comment.