Skip to content

spinler/phosphor-fan-presence

 
 

Repository files navigation

Repository Details

Table of Contents

Overview

The phosphor-fan-presence repository provides a set of thermal related applications that control and monitor the cooling of a system using fans. Each application independently controls or monitors an area related to the thermal status of a system that uses fans as its primary cooling mechanism. Since each application independent in its functionality, they can individually be included in a BMC image at configure time to provide only the functionality needed by a user's machine.

Building

By default, build time YAML configuration file(s) are used for each application. The use of YAML configuration file(s) has been deprecated in favor of using runtime JSON configuration file(s). Support for the use of YAML based configuration files will be removed once all applications completely support getting their configuration from JSON file(s) at runtime.

The following applications are built by default:

  • Fan Control
    • To disable from building, provide the --disable-control flag at configure time:
    ./configure ${CONFIGURE_FLAGS} --disable-control
    
  • Fan Presence Detection
    • To disable from building, provide the --disable-presence flag at configure time:
    ./configure ${CONFIGURE_FLAGS} --disable-presence
    
  • Fan Monitoring
    • To disable from building, provide the --disable-monitor flag at configure time:
    ./configure ${CONFIGURE_FLAGS} --disable-monitor
    
  • Cooling Type
    • To disable from building, provide the --disable-cooling-type flag at configure time:
    ./configure ${CONFIGURE_FLAGS} --disable-cooling-type
    

The following applications must be enabled at configure time to be built:

  • Sensor Monitoring
    • To enable building this, provide the --enable-sensor-monitor flag at configure time:
    ./configure ${CONFIGURE_FLAGS} --enable-sensor-monitor
    

To clean the repository run ./bootstrap.sh clean.

YAML (Deprecated)

The location of the YAML configuration file(s) are provided at configure time to each application thru environment variables. The default YAML configuration file(s) used are the examples found within each application's example directory. See each application below (Contents) for more information on how to set their specific configure time options, including the location of the YAML configuration file(s).

To simply build this package to use YAML, without changing the configurations of each application for a specific system, do the following steps:

    1. ./bootstrap.sh
    2. ./configure ${CONFIGURE_FLAGS}
    3. make

JSON

See each application below (Contents) for more information on how to set their specific configure time options and details on how to configure each using JSON.

To build this package to use JSON based runtime configuration for all applications, follow these steps and provide the --enable-json flag at configure time:

    1. ./bootstrap.sh
    2. ./configure ${CONFIGURE_FLAGS} --enable-json
    3. make

Note: Features/Restrictions of applications in this package that are only supported using the JSON based configuration are listed below:

Features

Restrictions

  • Fan Control
    • Currently only supports setting fans to the configured full_speed. If you require more than just setting fans to the configured full_speed, it is recommended to continue using YAML based configurations by providing the --disable-json-control flag at configure time.

Contents

Fan Control

Controls the fans based on a set of events that are configured using a group of D-Bus objects and one-or-more triggers that run a configured set of actions. These events are meant to be configured to handle all aspects of controlling the fans within a system. Fans are added to zones that then have events configured against the zone to control the fans based on the state of any sized group of D-Bus objects.

  • Configure time environment variables:
    • CONTROL_BUSNAME - Application's D-Bus busname to own
      • Default = 'xyz.openbmc_project.Control.Thermal'
    • CONTROL_OBJPATH - Application's root D-Bus object path
      • Default = '/xyz/openbmc_project/control/thermal'
    • CONTROL_PERSIST_ROOT_PATH - Base location to persist zone property states on the BMC
      • Default = '/var/lib/phosphor-fan-presence/control'

YAML (Deprecated)

Example

JSON

README


Fan Presence Detection

Monitors the presence state of fans using GPIOs, nonzero tach feedbacks, or a combination of both. This updates a configured location of a fan D-Bus object's Present property according to the state of the methods used to detect the fan's presence.

  • Configure time environment variables:
    • NUM_PRESENCE_LOG_ENTRIES - Maximum number of entries in the message log
      • Default = 50

YAML (Deprecated)

Example: example.yaml

JSON

README


Fan Monitoring

Monitors the functional state of fans by comparing the fan feedback speed against the current target, applying any configured adjustments to the target due to fan hardware properties. In addition to updating the configured location of a fan D-Bus object's Functional property in inventory, actions can be configured* to be taken based on the state of fans, i.e.) creating event logs or powering off the system.

Another feature that can be configured is the ability to cancel the monitoring of a set of fans that may be necessary to workaround designs of the fan hardware and/or controller used.

*Actions to be taken based on the state of fans is only available using a JSON based configuration

  • Configure time environment variables:
    • NUM_MONITOR_LOG_ENTRIES - Maximum number of entries in the message log
      • Default = 75
    • THERMAL_ALERT_BUSNAME - Application's D-Bus busname to own
      • Default = 'xyz.openbmc_project.Thermal.Alert'
    • THERMAL_ALERT_OBJPATH - Application's root D-Bus object path
      • Default = '/xyz/openbmc_project/alerts/thermal_fault_alert'

YAML (Deprecated)

Example: monitor.yaml

JSON

README


Cooling Type

Sets the AirCooled and WaterCooled property on the xyz.openbmc_project.Inventory.Decorator.CoolingType interface in inventory based on a given GPIO. No configuration files are used with this application as it is command line driven.


Sensor Monitoring

Takes actions, such as powering off the system, based on sensor thresholds and values.

  • Configure time environment variables:
    • SENSOR_MONITOR_PERSIST_ROOT_PATH - Base location to persist sensor monitoring data
      • Default = '/var/lib/phosphor-fan-presence/sensor-monitor'
    • SHUTDOWN_ALARM_HARD_SHUTDOWN_DELAY_MS - Milliseconds to delay the alarm hard shutdown
      • Default = 23000
    • SHUTDOWN_ALARM_SOFT_SHUTDOWN_DELAY_MS - Milliseconds to delay the alarm soft shutdown
      • Default = 900000

README


Releases

No releases published

Packages

No packages published

Languages

  • C++ 91.5%
  • Python 5.5%
  • M4 1.6%
  • Other 1.4%