Deye

Home Assistant integrations

DeyeInverter

Small utility to read data from DEYE Inverters through the Solarman Datalogger. Works with S/N 17*

Tests indicate that the full ModBus is available through the TCP connection. Probably this can lead to modifying Inverter Configuration via TCP calls.

Thanks to @fjcarretero https://github.com/fjcarretero for his incredible support on understanding the data from and to the datalogger. Thanks to @xtheone https://github.com/XtheOne for his original V4 reader that was an inspiration (and I borrowed some code). And Also @tamato27 borrowed some code and modified for use on a deye inverter

Thanks to all. And I modified some code for x86/amd64 and also the std Pi setup

Copy the folder that you want to use on specified platform deye_logger_x86_64 for the intel based home assistant and the deye_logger_pi for the rasberry pi enviroment into your addons folder

Configuration

Is intergrated into the addon installer, can configure inside Home assistant Options inverter_ip 192.168.x.x inverter_port 8899 inverter_sn 173XXXXXXX

mqtt [SERVERNAME] mqtt_port 1883 mqtt_topic /deye mqtt_username [MQTT_USERNAME] mqtt_passwd [MQTT_PASSWORD]

Run

{"Running Status()":2,
"Total Grid Produciton(kwh)":829.5,
"Total Grid Produciton(kwh)":0.0,
"Daily Energy Bought(kwh)":0.0,
"Daily Energy Sold(kwh)":15.0,
"Total Energy Bought(kwh)":21.900000000000002,
"Total Energy Bought(kwh)":0.0,
"Total Energy Sold(kwh)":1103.4,
"Total Energy Sold(kwh)":0.0,
"Daily Load Consumption(KWH)":1.2000000000000002,
"Total Load Consumption(KWH)":365.3,
"Total Load Consumption(KWH)":0.0,
"DC Temperature(℃)":149.5,
"AC Temperature(℃)":152.1,
"Total Production(KWH)":1517.4,
"Total Production(KWH)":0.0,
"Alert()":0,
"Alert()":0,
"Alert()":0,
"Alert()":0,
"Alert()":0,
"Alert()":0,
"Daily Production(KWH)":16.900000000000002,
"PV1 Voltage(V)":342.20000000000005,
"PV1 Current(A)":7.800000000000001,
"PV2 Voltage(V)":8.5,
"PV2 Current(A)":0.0,
"Grid Voltage L1(V)":241.3,
"Grid Voltage L2(V)":0.0,
"Load Voltage(V)":242.9,
"Current L1(A)":10.51,
"Current L2(A)":0.0,
"Micro-inverter Power(W)":0,
"Gen-connected Status()":0,
"Gen Power(W)":0,
"Internal CT L1 Power(W)":-2325,
"Internal CT L2  Power(W)":0,
"Grid Status()":-2365,
"Total Gird Power(W)":-2365,
"External CT L1 Power(W)":-2365,
"External CT L2 Power(W)":0,
"Inverter L1 Power(W)":2558,
"Inverter L2 Power(W)":0,
"Total Power(W)":2558,
"Load L1 Power(W)":193,
"Load L2 Power(W)":0,
"Total Load Power(W)":193,
"Battery Temperature(℃)":125.0,
"Battery Voltage(V)":10.14,
"Battery SOC(%)":0,
"PV1 Power(W)":2619,
"PV2 Power(W)":0,
"Battery Status()":0,
"Battery Power(W)":0,
"Battery Current(A)":-0.01,
"Grid-connected Status()":1,
"SmartLoad Enable Status()":16}

# Add the below to your sensor setup

# Deye Sensors. ############################################################
  - platform: mqtt
    name: "Solarpower"
    state_topic: "/deye"
    unit_of_measurement: "W"
    json_attributes_topic: "/deye/attributes"
    device_class: power
    state_class: measurement

  - platform: mqtt
    name: "Solar - Daily Energy Bought KWH"
    state_topic: "/deye/attributes"
    unit_of_measurement: "kWh"
    value_template: "{{ value_json.daily_energy_bought_kwh }}"
    device_class: energy
    state_class: total_increasing

  - platform: mqtt
    name: "Solar - Daily Energy Sold KWH"
    state_topic: "/deye/attributes"
    unit_of_measurement: "kWh"
    value_template: "{{ value_json.daily_energy_sold_kwh }}"
    device_class: energy
    state_class: total_increasing

  - platform: mqtt
    name: "Solar - Daily Production KWH"
    state_topic: "/deye/attributes"
    unit_of_measurement: "kWh"
    value_template: "{{ value_json.daily_production_KWH }}"
    device_class: energy
    state_class: total_increasing

  - platform: mqtt
    name: "Solar - Battery"
    state_topic: "/deye/attributes"
    unit_of_measurement: "%"
    value_template: "{{ value_json.battery_soc_perc }}"
    device_class: energy
    state_class: measurement

  - platform: mqtt
    name: "Solar - Battery Temperature"
    state_topic: "/deye/attributes"
    unit_of_measurement: "°C"
    value_template: "{{ value_json.battery_temperature_C }}"
    device_class: energy
    state_class: measurement

  - platform: mqtt
    name: "Solar - Grid Status"
    state_topic: "/deye/attributes"
    unit_of_measurement: " "
    value_template: "{{ value_json.grid_connected_status_ }}"
    device_class: energy
    state_class: measurement

  - platform: mqtt
    name: "Solar - Grid Usage"
    state_topic: "/deye/attributes"
    unit_of_measurement: ""
    value_template: "{{ value_json.total_grid_power_W }}"
    device_class: energy
    state_class: measurement

  ### End of Deye Sensors. #####################################################

Known Issues

The inverter is not fast enough to answer, you can get timeouts if you query it too often.

Contrib

Python is not my strongest suite, feel free to suggest, rewrite or add whatever you feel is necessary.

Home Assistant support

The folder deye_logger contains a Homeassistant add-on. Reference the README.md file in that folder more information.