Easy IMM

Table of Content

• Recommended Module Versions
• Updates
• Examples
• Important Notes
• YAML Schema Notes
• Cloud Posse tfenv
• Recommended Firmware
• Environment Variables
• Sensitive Variables for the Policies Module
• Execute Terraform Apply/Plan
• Terraform Requirements
• Terraform Providers
• Terraform Modules
• Terraform Inputs
• Terraform Outputs
• Sub Modules - Terraform Registry

Recommended Module Versions

SaaS API Version >=1.0.11-20241017091918219

Module	Module Version	Provider Version	Appliance Version	Module Notes
organizations	4.2.11-20241017091918219	1.0.59	Not Supported	New Module to Manage Organizations/Resource Groups.
pools	4.2.11-20241017091918219	1.0.59	Not Supported	Adds IP Pool Block Level IP Configuration.
policies	4.2.11-20241017091918219	1.0.59	Not Supported	* New Memory and Scrub Policies
profiles	4.2.11-20241017091918219	1.0.59	Not Supported	* Adds Support for Certificate Management/LDAP to Domain Profiles/Templates.

CVA Version >=1.1.1-0 API Version >=1.0.11-18735

Module	Module Version	Provider Version	Appliance Version	Module Notes
organizations	4.2.11-18775	1.0.51	>=1.1.1-0	New Module to Manage Organizations/Resource Groups.
pools	4.2.11-16711	1.0.51	>=1.1.1-0	With IP Pools use Configuration outside IP Block.
policies	4.2.11-16713	1.0.51	>=1.1.1-0	Anything supported by YAML Schema Outside of New Features in 17769
profiles	4.2.11-16712	1.0.51	>=1.1.1-0	* Adds Scrub Policies to Server Profiles/Templates.

PVA Version >=1.1.0-0 API Version >=1.0.11-16711

Module	Module Version	Provider Version	Appliance Version	Module Notes
organizations	4.2.11-18775	1.0.51	>=1.1.0-0	New Module to Manage Organizations/Resource Groups.
pools	4.2.11-16711	1.0.51	>=1.1.0-0	With IP Pools use Configuration outside IP Block.
policies	4.2.11-16713	1.0.51	>=1.1.0-0	Anything supported by YAML Schema Outside of New Features in 17769
profiles	4.2.11-16712	1.0.51	>=1.1.0-0	Doesn't support Chassis and Domain Templates

Back to Top

Updates

• 2024-11-12: Recommended releases are 4.2.11-20241004054146475 (SaaS) or 4.2.11-18775 (CVA 1.1.1-0). IMPORTANT NOTE: 4.2.11-20241004054146475 introduces support for multi-ethernet network group policies for Ethernet Uplink Port-Channels and Ethernet Uplink. If you are still using older module versions make sure to point to the older JSON Schema for Visual Studio Code. For example: v4.2.11-18775 - https://github.com/terraform-cisco-modules/easy-imm/blob/39542dfc4ee2f368d42ff6a73ee4e08cb26a4c09/yaml_schema/easy-imm.json
• 2024-10-23: Recommended releases are 4.2.11-20241004054146474 or 4.2.11-16712. Adding Memory Policy. Intersight API versioning changed to include date.
• 2024-10-11: Recommended releases are 4.2.11-18775 or 4.2.11-16712. Adding Scrub Policy.
• 2024-09-13: Recommended releases are 4.2.11-18371 or 4.2.11-16712. ISSUE 287 resolved.
• 2024-09-08: Rolling back SaaS recommendation to 4.2.11-17769 since provider v1.0.54 is broken again for server templates ISSUE 287 . Version v4.2.11-18369 and v4.2.11-18370 is on hold for now until provider fixed.
• 2024-09-07: Recommended releases are 4.2.11-18369 or 4.2.11-16711. This update changes the drive security policy to match the updated API of 1.0.11-18369. Make sure to update your variables.tf, locals.tf from the eas-imm repository to get the updated sensitive variables for drive_security. The variables have also been updated to do validation using the regular expression patterns from the API.
• 2024-07-23: Recommended releases are 4.2.11-17769 or 4.2.11-16711.
• 2024-07-16: Terraform Provider 1.0.48, 1.0.49, and 1.0.50 depricated due to breaking BIOS changes and bulk_merger problems. Do not use these provider versions.

Back to Top

Examples for Using the Easy IMM Terraform Modules

Examples are shown in the following directories:

• organizations
• policies
• pools
• profiles
• recommended_firmware - This is used to get the latest recommended firmware releases from Intersight
• templates
• Wakanda - To Show profiles using pools/policies/templates as Data Sources (Mostly)

organizations/policies/pools/profiles/templates Folders are the common/default/Asgard organizations in our lab environment.

Wakanda Folder is the Wakanda organization in our lab environment. It is not using the organizations module.

Back to Top

IMPORTANT NOTES

Take notice of the ezi.yaml extension on the files. This is how the data.utils_yaml_merge.model, in the main.tf, is configured to recognize the files that should be imported with the module.

The Structure of the YAML files is very flexible. You can have all the YAML Data in a single file or you can have it in multiple individual folders like is shown in this module. The important part is that the data.utils_yaml_merge.model is configured to read the folders that you put the Data into.

When defining Identity reservations under a server profile, see example in profiles folder, note the flag in the example with ignore_reservations. Reservation records are ephimeral. Meaning that as soon as the reservation is assigned to a server profile, the identity reservation record is removed from the API. Thus, after you run the first plan and the identities are created, this flag should be configured to true or you need to remove the reservations from the server_profiles. Either way the reservations will only work on the first apply. Subsequent applies with the reservations defined will cause the plan/apply to fail due to the identity being consumed.

YAML Schema Notes for auto-completion, Help, and Error Validation:

If you would like to utilize Autocomple, Help Context, and Error Validation, (HIGHLY RECOMMENDED) make sure the files all utilize the .ezi.yaml file extension.

Add the Following to YAML: Schemas. In Visual Studio Code: Settings > Settings > Search for YAML: Schema: Click edit in settings.json. In the yaml.schemas section:

"https://raw.githubusercontent.com/terraform-cisco-modules/easy-imm/main/yaml_schema/easy-imm.json": "*.ezi.yaml"

Soon the Schema for these YAML Files have been registered with SchemaStore via utilizing this .ezi.yaml file extension. But until that is complete, need to still add to settings.

Modify global_settings.ezi.yaml for SaaS versus CVA/PVA FQDN

global_settings.ezi.yamls contains variable intersight_fqdn.

Notes for the global_settings.ezi.yamls

• intersight_fqdn: SaaS will by default be intersight.com. Available in the event of CVA or PVA deployments.
• tags: Not Required, but by default the version of the script is being flagged here.

Note: Modules can be added or removed dependent on the use case. The primary example in this repository is consuming/showing a full environment deployment.

Back to Top

Cloud Posse tfenv

Command line utility to transform environment variables for use with Terraform. (e.g. HOSTNAME → TF_VAR_hostname)

Recently I adopted the tfenv runner to standardize environment variables with multiple orchestration tools. tfenv makes it so you don't need to add TF_VAR_ to the variables when you add them to the environment. But it doesn't work for windows would be the caveat.

In the export examples below, for the Linux Example, the 'TF_VAR_' is excluded because Cloud Posse tfenv is used to insert it during the run.

Make sure you have already installed go

go

go install github.com/cloudposse/tfenv@latest

Add go/bin to PATH

GOPATH="$HOME/go"
PATH="$GOPATH/bin:$PATH"

Aliases for .bashrc

Additionally to Save time on typing commands I use the following aliases by editing the .bashrc for my environment.

alias tfa='tfenv terraform apply main.plan'
alias tfap='tfenv terraform apply -parallelism=1 main.plan'
alias tfd='tfenv terraform destroy'
alias tff='terraform fmt'
alias tfi='terraform init'
alias tfim='tfenv terraform import'
alias tfp='tfenv terraform plan -out=main.plan'
alias tfu='terraform init -upgrade'
alias tfv='terraform validate'

Back to Top

Recommended Firmware

In the recommended_firmware folder is a simple terraform setup that you can use to query Intersight for the latest recommended firmware for servers. Following is an example output:

Creating Server Profiles from Templates or Attaching Server Profiles to Templates

If you want to create server profiles from templates use the flag create_from_template under the server profile in :profiles:server. See examples in ./profiles.

Do not create from template if you want to assign identity reservations to a server profile. Instead set the attach_template flag in the server profile. This will also attach the template to the profile but will reserve the identities to the profile prior to template attachement.

Back to Top

Environment Variables

Note that all the variables in variables.tf are marked as sensitive. Meaning these are variables that shouldn't be exposed due to the sensitive nature of them.

Take note of the locals.tf that currently has the following sensitive variables defined:

• certificate_management
• drive_security
• firmware
• ipmi_over_lan
• iscsi_boot
• ldap
• local_user
• persistent_memory
• snmp
• virtual_media

The Reason to add these variables as maps of string is to allow the flexibility to add or remove iterations of these sensitive variables as needed. Sensitive Variables cannot be iterated with a for_each loop. Thus instead of adding these variables to the YAML schema, directly, they are added to these seperate maps to allow lookup of the variable index.

In example, if you needed to add 100 iterations of the certificate_management variables you can do that, and simply reference the index in the map of the iteration that will consume that instance.

Terraform Cloud/Enterprise - Workspace Variables

• Add variable intersight_api_key_id with the value of your-intersight-api-key
• Add variable intersight_secret_key with the value of your-intersight-secret-file-content
• Add additional variables as required for the sensitive policy values

Add Other Variables as discussed below based on use cases.

Sensitive Variables for the Policies Module:

Take note of the locals.tf that currently has all the sensitive variables mapped.

This is the default sensitive variable mappings. You can add or remove to these according to the needs of your environment.

The important point is that if you need more than is added by default you can expand the locals.tf and variables.tf to accomodate your environment.

IMPORTANT:

ALL EXAMPLES BELOW ASSUME USING tfenv in LINUX

Linux - with tfenv

export intersight_api_key_id="<your-api-key>"
export intersight_secret_key="<secret-key-file-location>"

Windows

$env:TF_VAR_intersight_api_key_id="<your-api-key>"
$env:TF_VAR_intersight_secret_key="<secret-key-file-location>"

To Assign any of these values for consumption you can define them as discussed below.

Certificate Management

• cert_mgmt_certificate: Options are by default 1-5 for Up to 5 Certificates. Variable Should Point to the File Location of the PEM Certificate or be the value of the PEM certificate.
• cert_mgmt_private_key: Options are by default 1-5 for Up to 5 Private Keys. Variable Should Point to the File Location of the PEM Private Key or be the value of the PEM Private Key.

Linux - with tfenv

export cert_mgmt_certificate_1='<cert_mgmt_certificate_file_location>'

export cert_mgmt_private_key_1='<cert_mgmt_private_key_file_location>'

Windows

$env:TF_VAR_cert_mgmt_certificate_1='<cert_mgmt_certificate_file_location>'

$env:TF_VAR_cert_mgmt_private_key_1='<cert_mgmt_private_key_file_location>'

Drive Security - KMIP Sensitive Variables

• drive_security_current_security_key_passphrase: Used by Manual and Remote Key Management, if the server has a previous passphrase configured.
• drive_security_new_security_key_passphrase: Used by Manual Key Management to Assign a new passphrase to the server.
• drive_security_authentication_password: If Authentication is supported/used by the KMIP Server, This is the User Password to Configure.
• drive_security_server_ca_certificate: KMIP Server CA Certificate Contents.

Linux - with tfenv

export drive_security_authentication_password='<drive_security_authentication_password>'

export drive_security_server_ca_certificate='<drive_security_server_ca_certificate_file_location>'

Windows

$env:drive_security_authentication_password='<drive_security_authentication_password>'

$env:TF_VAR_drive_security_server_ca_certificate='<drive_security_server_ca_certificate_file_location>'

Firmware - CCO Credentials

• cco_user: If Configuring Firmware Policies, the CCO User for Firmware Downloads.
• cco_password: If Configuring Firmware Policies, the CCO Password for Firmware Downloads.

Linux - with tfenv

export cco_user='<cco_user>'

export cco_password='<cco_password>'

Windows

$env:TF_VAR_cco_user='<cco_user>'

$env:TF_VAR_cco_password='<cco_password>'

Back to Top

Execute the Terraform Apply/Plan

Terraform Cloud

When running in Terraform Cloud with VCS Integration the first Plan will need to be run from the UI but subsiqent runs should trigger automatically

Terraform CLI

• Execute the Plan - Linux

# First time execution requires initialization.  Not needed on subsequent runs.
terraform init
terraform plan -out="main.plan"
terraform apply "main.plan"

• Execute the Plan - Windows

# First time execution requires initialization.  Not needed on subsequent runs.
terraform.exe init
terraform.exe plan -out="main.plan"
terraform.exe apply "main.plan"

Requirements

Name	Version
terraform	>=1.3.0
intersight	1.0.59
time	0.9.1
utils	>= 0.1.3

Back to Top

Providers

Name	Version
utils	0.2.6

Back to Top

Modules

Name	Source	Version
organizations	terraform-cisco-modules/organizations/intersight	4.2.11-20241017091918219
pools	terraform-cisco-modules/pools/intersight	4.2.11-20241017091918219
policies	terraform-cisco-modules/policies/intersight	4.2.11-20241017091918219
profiles	/home/tyscott/terraform-cisco-modules/terraform-intersight-profiles	n/a

NOTE: When the Data is merged from the YAML files, it will run through the modules using for_each loop(s). Sensitive Variables cannot be added to a for_each loop, instead use the variables below to add sensitive values for policies.

Back to Top

Inputs

Name	Description	Type	Default	Required
intersight_api_key_id	Intersight API Key.	string	n/a	yes
intersight_secret_key	Intersight Secret Key.	string	"blah.txt"	no
cert_mgmt_certificate_1	The Server Certificate, in PEM Format, File Location.	string	"blah.txt"	no
cert_mgmt_certificate_2	The Server Certificate, in PEM Format, File Location.	string	"blah.txt"	no
cert_mgmt_certificate_3	The Server Certificate, in PEM Format, File Location.	string	"blah.txt"	no
cert_mgmt_certificate_4	The Server Certificate, in PEM Format, File Location.	string	"blah.txt"	no
cert_mgmt_certificate_5	The Server Certificate, in PEM Format, File Location.	string	"blah.txt"	no
cert_mgmt_private_key_1	The Server Private Key, in PEM Format, File Location.	string	"blah.txt"	no
cert_mgmt_private_key_2	The Server Private Key, in PEM Format, File Location.	string	"blah.txt"	no
cert_mgmt_private_key_3	The Server Private Key, in PEM Format, File Location.	string	"blah.txt"	no
cert_mgmt_private_key_4	The Server Private Key, in PEM Format, File Location.	string	"blah.txt"	no
cert_mgmt_private_key_5	The Server Private Key, in PEM Format, File Location.	string	"blah.txt"	no
drive_security_current_security_key_passphrase	Drive Security Current Security Key Passphrase for Manual or Remote Key Management. It must meet the following criteria: - One Uppercase Letter - One LowerCase Letter - One Number - One Special Character: !, @, #, $, %, ^, &, *, +, _, =, - - Be between 8 and 32 Characters in Length.	string	""	no
drive_security_new_security_key_passphrase	Drive Security New Security Key Passphrase for Manual Key Management. It must meet the following criteria: - One Uppercase Letter - One LowerCase Letter - One Number - One Special Character: !, @, #, $, %, ^, &, *, +, _, =, - - Be between 8 and 32 Characters in Length.	string	""	no
drive_security_authentication_password	Drive Security User Password.	string	""	no
drive_security_server_ca_certificate	Drive Security Server CA Certificate, in PEM Format, File Location.	string	"blah.txt"	no
cco_password	Cisco.com Authentication Password. It must meet the following criteria: - One Uppercase Letter - One Lowercase Letter - One Number - One Special Character: !, @, #, $, %, ^, &, *, +, _, =, - - Be between 12 and 60 Characters in Length.	string	""	no
cco_user	CCO User Account Email for Firmware Policies.	string	"cco_user"	no
ipmi_encryption_key	Encryption key to use for IPMI communication. It should have an even number of hexadecimal characters and not exceed 40 characters.	string	""	no
iscsi_boot_password	Password to Assign to the iSCSI Boot Policy if doing Authentication. It can be any string that adheres to the following constraints. - Any non-white space character - Be between 12 and 16 Characters in Length.	string	""	no
binding_parameters_password	The password of the user for initial bind process with an LDAP Policy. It can be any string that adheres to the following constraints. - Any non-white space character - Be between 8 and 254 Characters in Length.	string	""	no
local_user_password_1	Password to assign to a Local User Policy -> User. - Lower or Upper Case Letters - Numbers - Special Characters: !, @, #, $, %, ^, &, *, +, _, =, - - Be between 8 and 127 Characters in Length.	string	""	no
local_user_password_2	Password to assign to a Local User Policy -> User. - Lower or Upper Case Letters - Numbers - Special Characters: !, @, #, $, %, ^, &, *, +, _, =, - - Be between 8 and 127 Characters in Length.	string	""	no
local_user_password_3	Password to assign to a Local User Policy -> User. - Lower or Upper Case Letters - Numbers - Special Characters: !, @, #, $, %, ^, &, *, +, _, =, - - Be between 8 and 127 Characters in Length.	string	""	no
local_user_password_4	Password to assign to a Local User Policy -> User. - Lower or Upper Case Letters - Numbers - Special Characters: !, @, #, $, %, ^, &, *, +, _, =, - - Be between 8 and 127 Characters in Length.	string	""	no
local_user_password_5	Password to assign to a Local User Policy -> User. - Lower or Upper Case Letters - Numbers - Special Characters: !, @, #, $, %, ^, &, *, +, _, =, - - Be between 8 and 127 Characters in Length.	string	""	no
persistent_passphrase	Secure passphrase to be applied on the Persistent Memory Modules on the server. The allowed characters are: - Lower or Upper Case Letters - Numbers - Special Characters: !, @, #, $, %, ^, &, *, +, _, =, - - Be between 8 and 32 Characters in Length.	string	""	no
access_community_string_1	The default SNMPv1, SNMPv2c community name or SNMPv3 username to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
access_community_string_2	The default SNMPv1, SNMPv2c community name or SNMPv3 username to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
access_community_string_3	The default SNMPv1, SNMPv2c community name or SNMPv3 username to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
access_community_string_4	The default SNMPv1, SNMPv2c community name or SNMPv3 username to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
access_community_string_5	The default SNMPv1, SNMPv2c community name or SNMPv3 username to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
snmp_auth_password_1	The SNMPv3 User Authorization password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_auth_password_2	The SNMPv3 User Authorization password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_auth_password_3	The SNMPv3 User Authorization password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_auth_password_4	The SNMPv3 User Authorization password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_auth_password_5	The SNMPv3 User Authorization password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_privacy_password_1	The SNMPv3 User Privacy password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_privacy_password_2	The SNMPv3 User Privacy password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_privacy_password_3	The SNMPv3 User Privacy password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_privacy_password_4	The SNMPv3 User Privacy password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_privacy_password_5	The SNMPv3 User Privacy password. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, @, _, *, - - Be between 8 and 64 Characters in Length.	string	""	no
snmp_trap_community_1	The SNMPv1, SNMPv2c community name to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
snmp_trap_community_2	The SNMPv1, SNMPv2c community name to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
snmp_trap_community_3	The SNMPv1, SNMPv2c community name to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
snmp_trap_community_4	The SNMPv1, SNMPv2c community name to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
snmp_trap_community_5	The SNMPv1, SNMPv2c community name to include on any trap messages sent to the SNMP host. The name can be 32 characters long. Allowed Characters are: - Lower or Upper Case Letters - Numbers - Special Characters: ., =, !, &, #, $, %, +, ^, _, *, - - Be between 8 and 32 Characters in Length.	string	""	no
vmedia_password_1	Virtual Media Policy -> Mapping Target Password when authentication is enabled. Allowed Characters are: - Any non-white space character - Be between 6 and 255 Characters in Length.	string	""	no
vmedia_password_2	Virtual Media Policy -> Mapping Target Password when authentication is enabled. Allowed Characters are: - Any non-white space character - Be between 6 and 255 Characters in Length.	string	""	no
vmedia_password_3	Virtual Media Policy -> Mapping Target Password when authentication is enabled. Allowed Characters are: - Any non-white space character - Be between 6 and 255 Characters in Length.	string	""	no
vmedia_password_4	Virtual Media Policy -> Mapping Target Password when authentication is enabled. Allowed Characters are: - Any non-white space character - Be between 6 and 255 Characters in Length.	string	""	no
vmedia_password_5	Virtual Media Policy -> Mapping Target Password when authentication is enabled. Allowed Characters are: - Any non-white space character - Be between 6 and 255 Characters in Length.	string	""	no

Back to Top

Outputs

Name	Description
organizations	Outputs from the organizations module.
policies	Outputs from the policies module.
pools	Outputs from the pools module.
profiles	Outputs from the profiles module.

Back to Top

Sub Modules - Terraform Registry

If you want to see documentation on Variables for Submodules use the links below:

* Organizations

* Policies

* Pools

* Profiles

Back to Top