First thing to do is clone this github repository:
git clone https://github.com/trunk96/raspberrypi_projects.git
then set the run.sh script to be owned by root:
sudo chmod 755 run.sh
sudo chown root:root run.sh
finally add the following line at the end of the /etc/rc.local file (just before the exit 0 command):
/complete/path/to/your/cloned/repository/run.sh &
Once cloned the repository, the first thing to do is to start the proxy server. In such a way it is possible to bind different services into port :80.
Go to proxy and run:
sudo ./env/bin/python proxy.py &
In order to start this service go to home_automation and run:
./env/bin/python turn_all_off.py &
to activate the service (it runs on port :8080).
This service exposes also the list of discovered shellies at http://127.0.0.1/get_shellies for any other service that requests them.
In order to start this service go to test and run:
./env/bin/python test.py &
to activate the service (it runs on port :8081). This service makes use of Shelly turn off automation one, so please start Test service after it.
In order to start this service go to battery_autocharging and run:
./env/bin/python battery_server.py &
to activate the service (it runs on port :8082)
This service can be used to turn on and off my Meross power strip in order to start/stop the charging of my PC. This service is just a part of the system: the other part is hosted by the PC itself and measures the battery level in order to command the start/stop of the charging.