Update contribution overviews

README.md

@@ -25,100 +25,130 @@ The current week is shown below. There are 3 major sections:
 pie
     "tscircuit/builder" : 5
     "tscircuit/pcb-viewer" : 1
-    "tscircuit/cli" : 3
+    "tscircuit/cli" : 4
+    "tscircuit/props" : 2
     "tscircuit/footprinter" : 1
     "tscircuit/jscad-fiber" : 5
-    "tscircuit/easyeda-converter" : 1
+    "tscircuit/soup-to-svg" : 1
+    "tscircuit/easyeda-converter" : 2
 ```
 
 ## Contributor Overview
 
 | Contributor | 🐳 Major | 🐙 Minor | 🐌 Tiny |
 |-------------|-------|-------|-------|
-| seveibar | 7 | 4 | 0 |
-| andrii-balitskyi | 1 | 1 | 0 |
-| Slaviiiii | 3 | 0 | 0 |
+| seveibar | 9 | 3 | 0 |
+| imrishabh18 | 2 | 0 | 0 |
+| andrii-balitskyi | 2 | 1 | 0 |
+| Slaviiiii | 1 | 2 | 0 |
 
 ## Changes by Repository
 
 ### [tscircuit/builder](https://github.com/tscircuit/builder)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#74](https://github.com/tscircuit/builder/pull/74) | 🐳 Major | seveibar | Fix issue where failure to connect routes doesn't show an error that routes failed to connect |
+| [#74](https://github.com/tscircuit/builder/pull/74) | 🐳 Major | seveibar | Fix an issue where failure to connect routes does not show an error that routes failed to connect. |
+| [#73](https://github.com/tscircuit/builder/pull/73) | 🐳 Major | seveibar | Fix bad usage of `convert` function in `plated-hole-builder.ts` |
 | [#72](https://github.com/tscircuit/builder/pull/72) | 🐳 Major | seveibar | Fix default plated hole construction when there's no outer width or hole width |
 | [#71](https://github.com/tscircuit/builder/pull/71) | 🐳 Major | seveibar | Fix default plated hole construction when there's no outer width or hole width |
-| [#73](https://github.com/tscircuit/builder/pull/73) | 🐙 Minor | seveibar | Fix bad usage of `convert` function in `plated-hole-builder.ts` |
-| [#70](https://github.com/tscircuit/builder/pull/70) | 🐙 Minor | seveibar | Upgrade the `@tscircuit/footprinter` dependency to version `0.0.44`. |
+| [#70](https://github.com/tscircuit/builder/pull/70) | 🐙 Minor | seveibar | Upgrade the Footprinter package to version 0.0.44 |
 
 ### [tscircuit/pcb-viewer](https://github.com/tscircuit/pcb-viewer)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#25](https://github.com/tscircuit/pcb-viewer/pull/25) | 🐳 Major | seveibar | Fix port aliases not appearing for smtpads and plated holes for most components |
+| [#25](https://github.com/tscircuit/pcb-viewer/pull/25) | 🐳 Major | seveibar | Fix port aliases not appearing for SMTPads and plated holes for most components |
 
 ### [tscircuit/cli](https://github.com/tscircuit/cli)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#99](https://github.com/tscircuit/cli/pull/99) | 🐳 Major | seveibar | Fix "over dragging" issue, add debug logging, fix LEVEL_NOT_FOUND error messages |
-| [#98](https://github.com/tscircuit/cli/pull/98) | 🐙 Minor | seveibar | Add --no-cleanup flag to keep temporary entrypoints around |
-| [#100](https://github.com/tscircuit/cli/pull/100) | 🐙 Minor | andrii-balitskyi | Improve 401 error messages by providing a more informative message and exiting the process with a non-zero status code. |
+| [#99](https://github.com/tscircuit/cli/pull/99) | 🐳 Major | seveibar | Fix "over dragging" issue, add debug logging, and fix LEVEL_NOT_FOUND error messages |
+| [#102](https://github.com/tscircuit/cli/pull/102) | 🐳 Major | imrishabh18 | Fix issue where localhost is interpreted as IPv6 instead of IPv4 by the axiosInstance package. |
+| [#98](https://github.com/tscircuit/cli/pull/98) | 🐙 Minor | seveibar | Add a `--no-cleanup` flag to keep temporary entrypoints around for debugging purposes. |
+| [#100](https://github.com/tscircuit/cli/pull/100) | 🐙 Minor | andrii-balitskyi | Improve 401 error messages with a better user-friendly message and exit the process. |
+
+### [tscircuit/props](https://github.com/tscircuit/props)
+
+| PR # | Impact | Contributor | Description |
+|------|--------|-------------|-------------|
+| [#6](https://github.com/tscircuit/props/pull/6) | 🐳 Major | seveibar | Add format check and typecheck workflows to the project. |
+| [#7](https://github.com/tscircuit/props/pull/7) | 🐙 Minor | Slaviiiii | Change the property names from `pcbCenterX` and `pcbCenterY` to `pcbX` and `pcbY` in the `boardProps` type. |
 
 ### [tscircuit/footprinter](https://github.com/tscircuit/footprinter)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#11](https://github.com/tscircuit/footprinter/pull/11) | 🐳 Major | seveibar | Add a new `pinrow` function and a new `biome.json` configuration |
+| [#11](https://github.com/tscircuit/footprinter/pull/11) | 🐳 Major | seveibar | Add a new `pinrow` function and a corresponding `biome.json` configuration. |
 
 ### [tscircuit/jscad-fiber](https://github.com/tscircuit/jscad-fiber)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#16](https://github.com/tscircuit/jscad-fiber/pull/16) | 🐳 Major | seveibar | Introduce test and release workflows, fix exports, and add build system |
-| [#19](https://github.com/tscircuit/jscad-fiber/pull/19) | 🐳 Major | Slaviiiii | Update functions and shapes |
-| [#12](https://github.com/tscircuit/jscad-fiber/pull/12) | 🐳 Major | Slaviiiii | Adds support for three new extrusion types: helical, rectangular, and rotational, as well as a Project component. |
-| [#15](https://github.com/tscircuit/jscad-fiber/pull/15) | 🐳 Major | Slaviiiii | Adds support for geometry colorization in the JSCAD fixture component. |
-| [#20](https://github.com/tscircuit/jscad-fiber/pull/20) | 🐙 Minor | seveibar | Fix gh-pages not deploying by updating the predeploy script to build the cosmos-export instead of the library. |
+| [#16](https://github.com/tscircuit/jscad-fiber/pull/16) | 🐳 Major | seveibar | Add test and release workflows, fix exports, and add build system |
+| [#20](https://github.com/tscircuit/jscad-fiber/pull/20) | 🐙 Minor | seveibar | Fix the `predeploy` script to build the Cosmos export instead of the library. |
+| [#19](https://github.com/tscircuit/jscad-fiber/pull/19) | 🐙 Minor | Slaviiiii | Update functions and shapes in the examples |
+| [#12](https://github.com/tscircuit/jscad-fiber/pull/12) | 🟣 | Slaviiiii | Adds support for various extrusion operations, including helical, rectangular, and rotational extrusions.
+   - |
+| [#15](https://github.com/tscircuit/jscad-fiber/pull/15) | 🐳 Major | Slaviiiii | Add support for geometry colorization in the JSCAD fixture component. |
+
+### [tscircuit/soup-to-svg](https://github.com/tscircuit/soup-to-svg)
+
+| PR # | Impact | Contributor | Description |
+|------|--------|-------------|-------------|
+| [#2](https://github.com/tscircuit/soup-to-svg/pull/2) | 🐳 Major | imrishabh18 | Initialized the lib with build and type checking. |
 
 ### [tscircuit/easyeda-converter](https://github.com/tscircuit/easyeda-converter)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#23](https://github.com/tscircuit/easyeda-converter/pull/23) | 🐳 Major | andrii-balitskyi | Add support for parsing RECT package detail shape |
+| [#25](https://github.com/tscircuit/easyeda-converter/pull/25) | 🐳 Major | andrii-balitskyi | Use the manufacturer part number as the TypeScript component name, with normalization to ensure valid names. |
+| [#23](https://github.com/tscircuit/easyeda-converter/pull/23) | 🐳 Major | andrii-balitskyi | Add support for parsing `RECT` package detail shape |
 
 ## Changes by Contributor
 
 ### [seveibar](https://github.com/seveibar)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#74](https://github.com/tscircuit/builder/pull/74) | 🐳 Major | Fix issue where failure to connect routes doesn't show an error that routes failed to connect |
+| [#74](https://github.com/tscircuit/builder/pull/74) | 🐳 Major | Fix an issue where failure to connect routes does not show an error that routes failed to connect. |
+| [#73](https://github.com/tscircuit/builder/pull/73) | 🐳 Major | Fix bad usage of `convert` function in `plated-hole-builder.ts` |
 | [#72](https://github.com/tscircuit/builder/pull/72) | 🐳 Major | Fix default plated hole construction when there's no outer width or hole width |
 | [#71](https://github.com/tscircuit/builder/pull/71) | 🐳 Major | Fix default plated hole construction when there's no outer width or hole width |
-| [#25](https://github.com/tscircuit/pcb-viewer/pull/25) | 🐳 Major | Fix port aliases not appearing for smtpads and plated holes for most components |
-| [#99](https://github.com/tscircuit/cli/pull/99) | 🐳 Major | Fix "over dragging" issue, add debug logging, fix LEVEL_NOT_FOUND error messages |
-| [#11](https://github.com/tscircuit/footprinter/pull/11) | 🐳 Major | Add a new `pinrow` function and a new `biome.json` configuration |
-| [#16](https://github.com/tscircuit/jscad-fiber/pull/16) | 🐳 Major | Introduce test and release workflows, fix exports, and add build system |
-| [#73](https://github.com/tscircuit/builder/pull/73) | 🐙 Minor | Fix bad usage of `convert` function in `plated-hole-builder.ts` |
-| [#70](https://github.com/tscircuit/builder/pull/70) | 🐙 Minor | Upgrade the `@tscircuit/footprinter` dependency to version `0.0.44`. |
-| [#98](https://github.com/tscircuit/cli/pull/98) | 🐙 Minor | Add --no-cleanup flag to keep temporary entrypoints around |
-| [#20](https://github.com/tscircuit/jscad-fiber/pull/20) | 🐙 Minor | Fix gh-pages not deploying by updating the predeploy script to build the cosmos-export instead of the library. |
+| [#25](https://github.com/tscircuit/pcb-viewer/pull/25) | 🐳 Major | Fix port aliases not appearing for SMTPads and plated holes for most components |
+| [#99](https://github.com/tscircuit/cli/pull/99) | 🐳 Major | Fix "over dragging" issue, add debug logging, and fix LEVEL_NOT_FOUND error messages |
+| [#6](https://github.com/tscircuit/props/pull/6) | 🐳 Major | Add format check and typecheck workflows to the project. |
+| [#11](https://github.com/tscircuit/footprinter/pull/11) | 🐳 Major | Add a new `pinrow` function and a corresponding `biome.json` configuration. |
+| [#16](https://github.com/tscircuit/jscad-fiber/pull/16) | 🐳 Major | Add test and release workflows, fix exports, and add build system |
+| [#70](https://github.com/tscircuit/builder/pull/70) | 🐙 Minor | Upgrade the Footprinter package to version 0.0.44 |
+| [#98](https://github.com/tscircuit/cli/pull/98) | 🐙 Minor | Add a `--no-cleanup` flag to keep temporary entrypoints around for debugging purposes. |
+| [#20](https://github.com/tscircuit/jscad-fiber/pull/20) | 🐙 Minor | Fix the `predeploy` script to build the Cosmos export instead of the library. |
+
+### [imrishabh18](https://github.com/imrishabh18)
+
+| PR # | Impact | Description |
+|------|--------|-------------|
+| [#102](https://github.com/tscircuit/cli/pull/102) | 🐳 Major | Fix issue where localhost is interpreted as IPv6 instead of IPv4 by the axiosInstance package. |
+| [#2](https://github.com/tscircuit/soup-to-svg/pull/2) | 🐳 Major | Initialized the lib with build and type checking. |
 
 ### [andrii-balitskyi](https://github.com/andrii-balitskyi)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#23](https://github.com/tscircuit/easyeda-converter/pull/23) | 🐳 Major | Add support for parsing RECT package detail shape |
-| [#100](https://github.com/tscircuit/cli/pull/100) | 🐙 Minor | Improve 401 error messages by providing a more informative message and exiting the process with a non-zero status code. |
+| [#25](https://github.com/tscircuit/easyeda-converter/pull/25) | 🐳 Major | Use the manufacturer part number as the TypeScript component name, with normalization to ensure valid names. |
+| [#23](https://github.com/tscircuit/easyeda-converter/pull/23) | 🐳 Major | Add support for parsing `RECT` package detail shape |
+| [#100](https://github.com/tscircuit/cli/pull/100) | 🐙 Minor | Improve 401 error messages with a better user-friendly message and exit the process. |
 
 ### [Slaviiiii](https://github.com/Slaviiiii)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#19](https://github.com/tscircuit/jscad-fiber/pull/19) | 🐳 Major | Update functions and shapes |
-| [#12](https://github.com/tscircuit/jscad-fiber/pull/12) | 🐳 Major | Adds support for three new extrusion types: helical, rectangular, and rotational, as well as a Project component. |
-| [#15](https://github.com/tscircuit/jscad-fiber/pull/15) | 🐳 Major | Adds support for geometry colorization in the JSCAD fixture component. |
+| [#7](https://github.com/tscircuit/props/pull/7) | 🐙 Minor | Change the property names from `pcbCenterX` and `pcbCenterY` to `pcbX` and `pcbY` in the `boardProps` type. |
+| [#19](https://github.com/tscircuit/jscad-fiber/pull/19) | 🐙 Minor | Update functions and shapes in the examples |
+| [#12](https://github.com/tscircuit/jscad-fiber/pull/12) | 🟣 | Adds support for various extrusion operations, including helical, rectangular, and rotational extrusions.
+   - |
+| [#15](https://github.com/tscircuit/jscad-fiber/pull/15) | 🐳 Major | Add support for geometry colorization in the JSCAD fixture component. |