Skip to content

watsonbox/pocketsphinx-ruby

Repository files navigation

pocketsphinx-ruby

Build Status Code Climate Coverage Status Yard Docs

This gem provides Ruby FFI bindings for Pocketsphinx, a lightweight speech recognition engine, specifically tuned for handheld and mobile devices, though it works equally well on the desktop. Pocketsphinx is part of the CMU Sphinx Open Source Toolkit For Speech Recognition.

Pocketsphinx's SWIG interface was initially considered for this gem, but dropped in favor of FFI for many of the reasons outlined here; most importantly ease of maintenance and JRuby support.

The goal of this project is to make it as easy as possible for the Ruby community to experiment with speech recognition. Please do contribute fixes and enhancements.

Installation

This gem depends on Pocketsphinx (libpocketsphinx), and Sphinxbase (libsphinxbase and libsphinxad). The current stable versions (0.8) are from late 2012 and are now outdated. Build them manually from source, or on OSX the latest development (potentially unstable) versions can be installed using Homebrew as follows (more information here).

Add the Homebrew tap:

$ brew tap watsonbox/cmu-sphinx

You'll see some warnings as these formulae conflict with those in the main reponitory, but that's fine.

Install the libraries:

$ brew install --HEAD watsonbox/cmu-sphinx/cmu-sphinxbase
$ brew install --HEAD watsonbox/cmu-sphinx/cmu-sphinxtrain # optional
$ brew install --HEAD watsonbox/cmu-sphinx/cmu-pocketsphinx

You can test continuous recognition as follows:

$ pocketsphinx_continuous -inmic yes

Then add this line to your application's Gemfile:

gem 'pocketsphinx-ruby'

And then execute:

$ bundle

Or install it yourself as:

$ gem install pocketsphinx-ruby

Usage

The LiveSpeechRecognizer is modeled on the same class in Sphinx4. It uses the Microphone and Decoder classes internally to provide a simple, high-level recognition interface:

require 'pocketsphinx-ruby' # Omitted in subsequent examples

Pocketsphinx::LiveSpeechRecognizer.new.recognize do |speech|
  puts speech
end

The AudioFileSpeechRecognizer decodes directly from an audio file by coordinating interactions between an AudioFile and Decoder.

recognizer = Pocketsphinx::AudioFileSpeechRecognizer.new

recognizer.recognize('spec/assets/audio/goforward.raw') do |speech|
  puts speech # => "go forward ten meters"
end

These two classes split speech into utterances by detecting silence between them. By default this uses Pocketsphinx's internal Voice Activity Detection (VAD) which can be configured by adjusting the vad_postspeech, vad_prespeech, and vad_threshold configuration settings.

Configuration

All of Pocketsphinx's decoding settings are managed by the Configuration class, which can be passed into the high-level speech recognizers:

configuration = Pocketsphinx::Configuration.default
configuration.details('vad_threshold')
# => {
#   :name => "vad_threshold",
#   :type => :float,
#   :default => 2.0,
#   :value => 2.0,
#   :info => "Threshold for decision between noise and silence frames. Log-ratio between signal level and noise level."
# }

configuration['vad_threshold'] = 4

Pocketsphinx::LiveSpeechRecognizer.new(configuration)

You can find the output of configuration.details here for more information on the various different settings.

Microphone

The Microphone class uses Pocketsphinx's libsphinxad to record audio for speech recognition. For desktop applications this should normally be 16bit/16kHz raw PCM audio, so these are the default settings. The exact audio backend depends on what was selected when libsphinxad was built. On OSX, OpenAL is now supported and should work just fine.

For example, to record and save a 5 second raw audio file:

microphone = Pocketsphinx::Microphone.new

File.open("test.raw", "wb") do |file|
  microphone.record do
    FFI::MemoryPointer.new(:int16, 2048) do |buffer|
      50.times do
        sample_count = microphone.read_audio(buffer, 2048)
        file.write buffer.get_bytes(0, sample_count * 2)

        sleep 0.1
      end
    end
  end
end

To open this audio file take a look at this wiki page.

Decoder

The Decoder class uses Pocketsphinx's libpocketsphinx to decode audio data into text. For example to decode a single utterance:

decoder = Pocketsphinx::Decoder.new(Pocketsphinx::Configuration.default)
decoder.decode 'spec/assets/audio/goforward.raw'

puts decoder.hypothesis # => "go forward ten meters"

And split into individual words with frame data:

decoder.words
# => [
#  #<struct Pocketsphinx::Decoder::Word word="<s>", start_frame=608, end_frame=610>,
#  #<struct Pocketsphinx::Decoder::Word word="go", start_frame=611, end_frame=622>,
#  #<struct Pocketsphinx::Decoder::Word word="forward", start_frame=623, end_frame=675>,
#  #<struct Pocketsphinx::Decoder::Word word="ten", start_frame=676, end_frame=711>,
#  #<struct Pocketsphinx::Decoder::Word word="meters", start_frame=712, end_frame=770>,
#  #<struct Pocketsphinx::Decoder::Word word="</s>", start_frame=771, end_frame=821>
# ]

Note: When the Decoder is initialized, the supplied Configuration is updated by Pocketsphinx with some settings from the acoustic model. To see exactly what's going on:

Pocketsphinx::Decoder.new(Pocketsphinx::Configuration.default).configuration.changes

Keyword Spotting

Keyword spotting is another feature that is not in the current stable (0.8) releases of Pocketsphinx, having been merged into trunk early in 2014. It can be useful for detecting an activation keyword in a command and control application, while ignoring all other speech. Set up a recognizer as follows:

configuration = Pocketsphinx::Configuration::KeywordSpotting.new('Okay computer')
recognizer = Pocketsphinx::LiveSpeechRecognizer.new(configuration)

The KeywordSpotting configuration accepts a second argument for adjusting the sensitivity of the keyword detection. Note that this is just a wrapper which sets the keyphrase and kws_threshold settings on the default configuration, and removes the language model:

Pocketsphinx::Configuration::KeywordSpotting.new('keyword', 2).changes
# => [
#   { :name => "keyphrase", :type => :string, :default => nil, :required => false, :value => "keyword", :info => "Keyphrase to spot" },
#   { :name => "kws_threshold", :type => :float, :default => 1.0, :required => false, :value => 2.0, :info => "Threshold for p(hyp)/p(alternatives) ratio" },
#   { :name => "lm", :type => :string, :default => "/usr/local/Cellar/cmu-pocketsphinx/HEAD/share/pocketsphinx/model/lm/en_US/hub4.5000.DMP", :required => false, :value => nil, :info => "Word trigram language model input file" }
# ]

Grammars

Another way of configuring Pocketsphinx is with a grammar, which is normally used to describe very simple types of languages for command and control. Restricting the set of possible utterances in this way can greatly improve recognition accuracy for these types of application.

Load a JSGF grammar from a file:

configuration = Pocketsphinx::Configuration::Grammar.new('sentences.gram')

Or build one dynamically with this simple DSL (currently only supports sentence lists):

configuration = Pocketsphinx::Configuration::Grammar.new do
  sentence "Go forward ten meters"
  sentence "Go backward ten meters"
end

Recognition Accuracy and Training

See the CMU Sphinx resources on training and adapting acoustic models for more information.

Peter Grasch, author of Simon, has also made a number of interesting posts on the state of open source speech recognition, as wells as improving language and acoustic models.

See sphinxtrain-ruby for an experimental toolkit for training/adapting CMU Sphinx acoustic models. Its main goal is to help with adapting existing acoustic models to a specific speaker/accent.

Troubleshooting

First and foremost, because this gem depends on development versions of CMU Sphinx packages, there will be times when errors are caused by API changes or bugs in those packages. Unfortunately until some up to date releases are made this is going to happen from time to time, so please do open an issue with as much detail as you have.

This gem has been tested with a manual Pocketsphinx installation on Ubuntu 14.04 and a Homebrew Pocketsphinx installation on OSX 10.9.4 Mavericks. Take a look at the following common problems before opening an issue.

`attach_function': Function 'ps_default_search_args' not found in [libpocketsphinx.so] (FFI::NotFoundError)

An error like this probably means that you have an old version of the Pocketsphinx libraries installed. If necessary, replace them with a recent development version which supports the features available in this gem.

Contributing

  1. Fork it ( https://github.com/watsonbox/pocketsphinx-ruby/fork )
  2. Create your feature branch (git checkout -b my-new-feature)
  3. Commit your changes (git commit -am 'Add some feature')
  4. Push to the branch (git push origin my-new-feature)
  5. Create a new Pull Request

Projects Using pocketsphinx-ruby

  • Isabella - A voice-computing assistant built in Ruby.
  • sphinxtrain-ruby - A Toolkit for training/adapting CMU Sphinx acoustic models.

About

Ruby speech recognition with Pocketsphinx

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages