[WIP] My onscripter-libretro fork
Status: only tested under xubuntu 20, and may be tested well under MIYOO A30 and MIYOO Mini Plus.
It may be used well for MIYOO A30 (open 0.txt as content using RetroArch32) and
MIYOO MINI Plus (only for .sh script running with ra32, or change settings to show menu 'Load Content'),
not very sure.
RG28XX has its own prebuilt good onscripter_libretro.so file (closed sources ?),
but it can be replaced with my build .so file, something will be wrong about key mapping.
- (done) No ARMv8 64bit support (cannot run on Trimui Smart Pro)
- ONScripter save menu text is not shown with good charset (JH version ? original vesion ?)
- JH version dialog text third line is outside the dialog
- (TODO) test ONS游戏整合包.rar, ONS.zip.001 (harddisk work_ons2, use Ons_for_PC.rar)
- (TODO) test PSP game like:
[PSP][PC移植版][月姬][中文版].rar
- (TODO) running failed: narcissu for psp β.zip
- (TODO) running failed: 突然之间发现我已恋上你
- (TODO) running failed: 我所希冀的未来
- (TODO) running failed: 孤独少女百合物语
- (TODO) text or font bug: 水仙1+2
- (TODO) text or font bug: 纯白交响曲
- (origin, dead?) https://github.com/iyzsong/onscripter-libretro
- https://github.com/gouchi/onscripter-libretro
- https://github.com/madcock/libretro-onscripter
ARM Toolchain (all use one toolchain, include a30 and mini and rg28xx and rpizero2w, not include Trimui Smart Pro aarch64)
- (for miyoo a30) https://github.com/XK9274/a30-sdk-miyoo/releases/tag/16042024
see https://github.com/weimingtom/miyoo_a30_playground
see https://github.com/weimingtom/onscripter-jh-miyoo-a30 - (not tested) https://releases.linaro.org/components/toolchain/binaries/latest-7/arm-linux-gnueabihf/gcc-linaro-7.5.0-2019.12-x86_64_arm-linux-gnueabihf.tar.xz
see https://releases.linaro.org/components/toolchain/binaries/latest-7/arm-linux-gnueabihf/ - (for miyoo mini, not tested) https://github.com/Yorisoft/HelloMiyoo
see https://github.com/shauninman/miyoomini-toolchain-buildroot/releases/tag/v0.0.3
see https://github.com/shauninman/miyoomini-toolchain-buildroot/releases/download/v0.0.3/miyoomini-toolchain.tar.xz - (for rpi0, not tested) https://github.com/raspberrypi/tools/blob/master/arm-bcm2708/arm-linux-gnueabihf
or use gcc on rpi3 / rpi4 - (for Trimui Smart Pro, aarch64) https://github.com/trimui/toolchain_sdk_smartpro/releases/tag/20231018
- Status: Miyoo A30 (tested)
- Status: Miyoo Mini Plus (tested)
- Status: RG28XX (tested)
- Status: Xubuntu 20.04 x86-64 (tested)
- Status: Waveshare GPM280Z2 (tested)
- Status: Trimui Smart Pro (tested, 64bit aarch64)
- Status: R36S (tested, 64bit aarch64)
- Status: RGB10X (tested, 64bit aarch64)
- For ONScripter version: make MIYOO=1 JH=0
- For ONScripter and ONScripter-jh merge version: make MIYOO=1 JH=1
- For PC xubuntu 20.04 x86-64 ONScripter-jh merge version: make MIYOO=0 JH=1
- Also, you can convert 0.txt to UTF-8-BOM charset to use ONScripter version, not JH merge version, because newest version ONScripter may (?) support UTF-8-BOM
- JH merge version is for GBK/GB2312 charset 0.txt
retroarch->~/snap/retroarch/2879/.config/retroarch
或查看系统菜单games里面retroarch的快捷方式,打开后看设置,目录中的设置
- xubuntu 20.04 64bit : RetroArch 1.19.1 (open RetroArch with desktop main system menu, not command line)
$ make MIYOO=0 clean && make MIYOO=0
/snap/retroarch/2879/usr/local/bin/retroarch
/home/wmt/snap/retroarch/2879/.config/retroarch/cores
https://docs.libretro.com/development/retroarch/compilation/linux-and-bsd/
https://www.retroarch.com/index.php?page=linux-instructions
sudo snap install retroarch
- MIYOO A30: RetroArch 1.16.0 (for RetroArch32 from 软件应用 / APP)
$ make clean && make
/mnt/SDCARD/RetroArch/.retroarch/cores/
(not used) /mnt/SDCARD/RetroArch/.retroarch/core_info/
Need to put all two files (.info and .so) to cores/
Open 0.txt as content using RetroArch32
- MIYOO MINI Plus: RetroArch 1.10.2
The first method: (not only) for .sh script running with ra32 with -L parameter.
The second method: but you can also toggle "Show 'Load Content'" to load 0.txt.
$ make clean && make
/mnt/SDCARD/RetroArch/.retroarch/cores/
It can use same onscripter_libretro.so as MIYOO A30
launch2.sh (copy folder /mnt/SDCARD/Emu/FC)
...
HOME=$RA_DIR/ $RA_DIR/ra32.ss -v -L $RA_DIR/.retroarch/cores/$EMU "/mnt/SDCARD/Roms/ONS/tukihime/0.txt"
Then run this launch2.sh with file explorer in MIYOO MINI Plus
Or
Toggle on Menu: 设置(Settings)-界面(User Interface)-菜单项可见性(Menu Item Visibility)-
显示加载核心(Show 'Load Core') and 显示加载游戏(Show 'Load Content') and 显示系统信息(Show 'Information')
Then run 0.txt from menu 加载游戏(load content) and select core : ONScripter
- RG28XX: RetroArch 1.18.0, 32bit
$ make clean && make
copy to /mnt/vendor/deep/retro/cores
- Trimui Smart Pro: RetroArch 1.18.0, 64bit
$ make MIYOO=2 clean && make MIYOO=2
through sdcard reader, copy to SDCARD:\RetroArch\.retroarch\cores
aka: /mnt/SDCARD/RetroArch/.retroarch/cores/onscripter_libretro.so
- R36S: RetroArch 1.18.0, 64bit
$ make MIYOO=2 clean && make MIYOO=2
through retropie->file manager (from /roms/), copy to /home/ark/.config/retroarch/cores/onscripter_libretro.so
Select+X or two joystick press down: retroarch quick menu
Select+Start: retroarch exit
- RGB10X: RetroArch 1.19.1, 64bit
ArkOS same as R36S
$ make MIYOO=2 clean && make MIYOO=2
through retropie->file manager (from /roms/), copy to /home/ark/.config/retroarch/cores/onscripter_libretro.so
-+X: retroarch quick menu
-+Start: retroarch exit
- Android armeabi-v7a (Retro Arch 32-bit): RetroArch 1.19.1
RetroArch_ra32.apk
cd jni
set PATH=%PATH%;D:\android-ndk-r10e
ndk-build
(Modify Android.mk, include $(CORE_DIR)/Makefile-jh.common, to build jh version)
- Android arm64-v8a (Retro Arch AArch64): RetroArch 1.19.1
RetroArch_aarch64.apk
cd jni
set PATH=%PATH%;D:\android-ndk-r10e
ndk-build
(Modify Android.mk, include $(CORE_DIR)/Makefile-jh.common, to build jh version)
(Modify Application.mk, APP_ABI := arm64-v8a)
-
Windows 64bit, 1.19.1, win11
RetroArch-Win64-setup.exe
TDM-GCC-64_tdm64-gcc-10.3.0-2.7z
msys_v11_retroarch_build_64.7z
gcc 10.3.0 (tdm64-1), msys
$ make MIYOO=0 clean && make MIYOO=0
modify Makefile with -m64
NOTE: don't put two files with same prefix file name in cores folder (like onscripter_libretro.dllxxxx),
keep only one dll file in cores -
Windows 32bit, 1.19.1, win10
RetroArch.7z, RetroArch-Win32, gcc version 5.1.0 (tdm-1), msys
msys_v11_retroarch_build_32.7z
$ make MIYOO=0 clean && make MIYOO=0
modify Makefile with -m32
NOTE: don't put two files with same prefix file name in cores folder (like onscripter_libretro.dllxxxx),
keep only one dll file in cores -
Waveshare GPM280Z2 32bit, RetroArch 1.10.0, Retropie
$ make clean && make
Use WinSCP to copy to /home/pi/.config/retroarch/cores
SSH user/pass: pi/raspberry
or GPICASE2W, see retropie-buster-4.8-rpi2_3_zero2w.img.gz
see GPICASE2W-display-patch-main.zip