GitHub - xtaci/kcptun: A Quantum-Safe Secure Tunnel based on QPP, KCP, FEC, and N:M multiplexing.

Disclaimer: kcptun maintains a single website — github.com/xtaci/kcptun. Any websites other than github.com/xtaci/kcptun are not endorsed by xtaci.

Requirements

Target	Minimum	Recommended
System	aix darwin dragonfly freebsd linux netbsd openbsd solaris windows	linux
Memory	>20MB	>32MB
CPU	ANY	amd64 with AES-NI & AVX2

NOTE: if you are using kvm, make sure the guest os can do AES instructions

QuickStart

Download:

curl -L https://raw.githubusercontent.com/xtaci/kcptun/master/download.sh | sh

Increase the number of open files on your server, as:

ulimit -n 65535, or write it in ~/.bashrc.

Suggested sysctl.conf parameters for better handling of UDP packets:

net.core.rmem_max=26214400 // BDP - bandwidth delay product
net.core.rmem_default=26214400
net.core.wmem_max=26214400
net.core.wmem_default=26214400
net.core.netdev_max_backlog=2048 // proportional to -rcvwnd

You can also increase the per-socket buffer by adding parameter(default 4MB):

-sockbuf 16777217

for slow processors, increasing this buffer is CRITICAL to receive packets properly.

Download a corresponding one from precompiled Releases.

KCP Client: ./client_darwin_amd64 -r "KCP_SERVER_IP:4000" -l ":8388" -mode fast3 -nocomp -autoexpire 900 -sockbuf 16777217 -dscp 46
KCP Server: ./server_linux_amd64 -t "TARGET_IP:8388" -l ":4000" -mode fast3 -nocomp -sockbuf 16777217 -dscp 46

The above commands will establish port forwarding channel for 8388/tcp as:

Application -> KCP Client(8388/tcp) -> KCP Server(4000/udp) -> Target Server(8388/tcp)

which tunnels the original connection:

Application -> Target Server(8388/tcp)

Build from source

$ git clone https://github.com/xtaci/kcptun.git
$ cd kcptun
$ ./build-release.sh
$ cd build

All precompiled releases are generated from build-release.sh script.

Performance

Practical bandwidth graph with parameters: -mode fast3 -ds 10 -ps 3

Basic Tuning Guide

Improving Throughput

Q: I have a high-speed network link. How can I maximize bandwidth?

A: Increase -rcvwnd on the KCP Client and -sndwnd on the KCP Server simultaneously and gradually. The minimum of these values determines the maximum transfer rate of the link, as wnd * mtu / rtt. Then, try downloading something to see if it meets your requirements. (The MTU is adjustable with -mtu.)

Improving Latency

Q: I'm using kcptun for gaming and want to avoid any lag.

A: Lag often indicates packet loss. You can reduce lag by changing the -mode parameter.

For example: -mode fast3

Aggressiveness/Responsiveness on retransmission for embedded modes:

fast3 > fast2 > fast > normal > default

Head-of-Line Blocking (HOLB)

Since streams are multiplexed into a single physical channel, head-of-line blocking may occur. Increasing -smuxbuf to a larger value (default is 4MB) may mitigate this problem, though it will use more memory.

For versions >= v20190924, you can switch to smux version 2. Smux v2 has options to limit per-stream memory usage. Set -smuxver 2 to enable smux v2, and adjust -streambuf to limit per-stream memory usage. For example: -streambuf 2097152 limits per-stream memory usage to 2MB. Limiting the stream buffer on the receiver side applies back-pressure to the sender, preventing the sender from overwhelming the buffer along the link. (The -smuxver setting MUST be IDENTICAL on both sides, the default is 1.)

Slow Devices

kcptun uses Reed-Solomon Codes to recover lost packets, which requires substantial computation. Low-end ARM devices may not perform well with kcptun. For optimal performance, a multi-core x86 home server CPU like AMD Opteron is recommended. If you must use ARM routers, it's best to disable FEC and use salsa20 as the encryption method.

Expert Tuning Guide

Overview

Usage

> ./client_freebsd_amd64 -h
NAME:
   kcptun - client(with SMUX)

USAGE:
   client_freebsd_amd64 [global options] command [command options] [arguments...]

VERSION:
   20240729

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --localaddr value, -l value      local listen address (default: ":12948")
   --remoteaddr value, -r value     kcp server address, eg: "IP:29900" a for single port, "IP:minport-maxport" for port range (default: "vps:29900")
   --key value                      pre-shared secret between client and server (default: "it's a secrect") [$KCPTUN_KEY]
   --crypt value                    aes, aes-128, aes-192, salsa20, blowfish, twofish, cast5, 3des, tea, xtea, xor, sm4, none, null (default: "aes")
   --mode value                     profiles: fast3, fast2, fast, normal, manual (default: "fast")
   --QPP                            enable Quantum Permutation Pads(QPP)
   --QPPCount value                 the prime number of pads to use for QPP: The more pads you use, the more secure the encryption. Each pad requires 256 bytes. (default: 61)
   --conn value                     set num of UDP connections to server (default: 1)
   --autoexpire value               set auto expiration time(in seconds) for a single UDP connection, 0 to disable (default: 0)
   --scavengettl value              set how long an expired connection can live (in seconds) (default: 600)
   --mtu value                      set maximum transmission unit for UDP packets (default: 1350)
   --sndwnd value                   set send window size(num of packets) (default: 128)
   --rcvwnd value                   set receive window size(num of packets) (default: 512)
   --datashard value, --ds value    set reed-solomon erasure coding - datashard (default: 10)
   --parityshard value, --ps value  set reed-solomon erasure coding - parityshard (default: 3)
   --dscp value                     set DSCP(6bit) (default: 0)
   --nocomp                         disable compression
   --sockbuf value                  per-socket buffer in bytes (default: 4194304)
   --smuxver value                  specify smux version, available 1,2 (default: 1)
   --smuxbuf value                  the overall de-mux buffer in bytes (default: 4194304)
   --streambuf value                per stream receive buffer in bytes, smux v2+ (default: 2097152)
   --keepalive value                seconds between heartbeats (default: 10)
   --snmplog value                  collect snmp to file, aware of timeformat in golang, like: ./snmp-20060102.log
   --snmpperiod value               snmp collect period, in seconds (default: 60)
   --log value                      specify a log file to output, default goes to stderr
   --quiet                          to suppress the 'stream open/close' messages
   --tcp                            to emulate a TCP connection(linux)
   -c value                         config from json file, which will override the command from shell
   --pprof                          start profiling server on :6060
   --help, -h                       show help
   --version, -v                    print the version
   
> ./server_freebsd_amd64 -h
NAME:
   kcptun - server(with SMUX)

USAGE:
   server_freebsd_amd64 [global options] command [command options] [arguments...]

VERSION:
   20240729

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --listen value, -l value         kcp server listen address, eg: "IP:29900" for a single port, "IP:minport-maxport" for port range (default: ":29900")
   --target value, -t value         target server address, or path/to/unix_socket (default: "127.0.0.1:12948")
   --key value                      pre-shared secret between client and server (default: "it's a secrect") [$KCPTUN_KEY]
   --crypt value                    aes, aes-128, aes-192, salsa20, blowfish, twofish, cast5, 3des, tea, xtea, xor, sm4, none, null (default: "aes")
   --QPP                            enable Quantum Permutation Pads(QPP)
   --QPPCount value                 the prime number of pads to use for QPP: The more pads you use, the more secure the encryption. Each pad requires 256 bytes. (default: 61)
   --mode value                     profiles: fast3, fast2, fast, normal, manual (default: "fast")
   --mtu value                      set maximum transmission unit for UDP packets (default: 1350)
   --sndwnd value                   set send window size(num of packets) (default: 1024)
   --rcvwnd value                   set receive window size(num of packets) (default: 1024)
   --datashard value, --ds value    set reed-solomon erasure coding - datashard (default: 10)
   --parityshard value, --ps value  set reed-solomon erasure coding - parityshard (default: 3)
   --dscp value                     set DSCP(6bit) (default: 0)
   --nocomp                         disable compression
   --sockbuf value                  per-socket buffer in bytes (default: 4194304)
   --smuxver value                  specify smux version, available 1,2 (default: 1)
   --smuxbuf value                  the overall de-mux buffer in bytes (default: 4194304)
   --streambuf value                per stream receive buffer in bytes, smux v2+ (default: 2097152)
   --keepalive value                seconds between heartbeats (default: 10)
   --snmplog value                  collect snmp to file, aware of timeformat in golang, like: ./snmp-20060102.log
   --snmpperiod value               snmp collect period, in seconds (default: 60)
   --pprof                          start profiling server on :6060
   --log value                      specify a log file to output, default goes to stderr
   --quiet                          to suppress the 'stream open/close' messages
   --tcp                            to emulate a TCP connection(linux)
   -c value                         config from json file, which will override the command from shell
   --help, -h                       show help
   --version, -v                    print the version

Multiport Dialer

kcptun supports multi-port dialer like below:

client: --remoteaddr IP:minport-maxport
server: --listen IP:minport-maxport

eg:
client: --remoteaddr IP:3000-4000
server: --listen 0.0.0.0:3000-4000

by specifying port-range, kcptun will automatically switch to next random port within port-range when establishing each new connection.

Forward Error Correction

In coding theory, the Reed–Solomon code belongs to the class of non-binary cyclic error-correcting codes. The Reed–Solomon code is based on univariate polynomials over finite fields.

It is able to detect and correct multiple symbol errors. By adding t check symbols to the data, a Reed–Solomon code can detect any combination of up to t erroneous symbols, or correct up to ⌊t/2⌋ symbols. As an erasure code, it can correct up to t known erasures, or it can detect and correct combinations of errors and erasures. Furthermore, Reed–Solomon codes are suitable as multiple-burst bit-error correcting codes, since a sequence of b + 1 consecutive bit errors can affect at most two symbols of size b. The choice of t is up to the designer of the code, and may be selected within wide limits.

DSCP

Differentiated services or DiffServ is a computer networking architecture that specifies a simple, scalable and coarse-grained mechanism for classifying and managing network traffic and providing quality of service (QoS) on modern IP networks. DiffServ can, for example, be used to provide low-latency to critical network traffic such as voice or streaming media while providing simple best-effort service to non-critical services such as web traffic or file transfers.

DiffServ uses a 6-bit differentiated services code point (DSCP) in the 8-bit differentiated services field (DS field) in the IP header for packet classification purposes. The DS field and ECN field replace the outdated IPv4 TOS field.

setting each side with -dscp value, Here are some Commonly used DSCP values.

Cryptoanalysis

kcptun is shipped with builtin packet encryption powered by various block encryption algorithms and works in Cipher Feedback Mode, for each packet to be sent, the encryption process will start from encrypting a nonce from the system entropy, so encryption to same plaintexts never leads to a same ciphertexts thereafter.

The contents of the packets are completely anonymous with encryption, including the headers(FEC,KCP), checksums and contents. Note that, no matter which encryption method you choose on you upper layer, if you disable encryption by specifying -crypt none to kcptun, the transmit will be insecure somehow, since the header is PLAINTEXT to everyone it would be susceptible to header tampering, such as jamming the sliding window size, round-trip time, FEC property and checksums. aes-128 is suggested for minimal encryption since modern CPUs are shipped with AES-NI instructions and performs even better than salsa20(check the table below).

Other possible attacks to kcptun includes: a) traffic analysis, dataflow on specific websites may have pattern while interchanging data, but this type of eavesdropping has been mitigated by adapting smux to mix data streams so as to introduce noises, perfect solution to this has not appeared yet, theoretically by shuffling/mixing messages on larger scale network may mitigate this problem. b) replay attack, since the asymmetrical encryption has not been introduced into kcptun for some reason, capturing the packets and replay them on a different machine is possible, (notice: hijacking the session and decrypting the contents is still impossible), so upper layers should contain a asymmetrical encryption system to guarantee the authenticity of each message(to process message exactly once), such as HTTPS/OpenSSL/LibreSSL, only by signing the requests with private keys can eliminate this type of attack.

Important:

-crypt and -key must be the same on both KCP Client & KCP Server.
-crypt xor is also insecure and vulnerable to known-plaintext attack, do not use this unless you know what you are doing. (cryptanalysis note: any type of counter mode is insecure in packet encryption due to the shorten of counter period and leads to iv/nonce collision)

Benchmarks for crypto algorithms supported by kcptun:

BenchmarkSM4-4                 	   50000	     32087 ns/op	  93.49 MB/s	       0 B/op	       0 allocs/op
BenchmarkAES128-4              	  500000	      3274 ns/op	 916.15 MB/s	       0 B/op	       0 allocs/op
BenchmarkAES192-4              	  500000	      3587 ns/op	 836.34 MB/s	       0 B/op	       0 allocs/op
BenchmarkAES256-4              	  300000	      3828 ns/op	 783.60 MB/s	       0 B/op	       0 allocs/op
BenchmarkTEA-4                 	  100000	     15359 ns/op	 195.32 MB/s	       0 B/op	       0 allocs/op
BenchmarkXOR-4                 	20000000	        90.2 ns/op	33249.02 MB/s	       0 B/op	       0 allocs/op
BenchmarkBlowfish-4            	   50000	     26885 ns/op	 111.58 MB/s	       0 B/op	       0 allocs/op
BenchmarkNone-4                	30000000	        45.8 ns/op	65557.11 MB/s	       0 B/op	       0 allocs/op
BenchmarkCast5-4               	   50000	     34370 ns/op	  87.29 MB/s	       0 B/op	       0 allocs/op
Benchmark3DES-4                	   10000	    117893 ns/op	  25.45 MB/s	       0 B/op	       0 allocs/op
BenchmarkTwofish-4             	   50000	     33477 ns/op	  89.61 MB/s	       0 B/op	       0 allocs/op
BenchmarkXTEA-4                	   30000	     45825 ns/op	  65.47 MB/s	       0 B/op	       0 allocs/op
BenchmarkSalsa20-4             	  500000	      3282 ns/op	 913.90 MB/s	       0 B/op	       0 allocs/op

Benchmark result from openssl

$ openssl speed -evp aes-128-cfb
Doing aes-128-cfb for 3s on 16 size blocks: 157794127 aes-128-cfb's in 2.98s
Doing aes-128-cfb for 3s on 64 size blocks: 39614018 aes-128-cfb's in 2.98s
Doing aes-128-cfb for 3s on 256 size blocks: 9971090 aes-128-cfb's in 2.99s
Doing aes-128-cfb for 3s on 1024 size blocks: 2510877 aes-128-cfb's in 2.99s
Doing aes-128-cfb for 3s on 8192 size blocks: 310865 aes-128-cfb's in 2.98s
OpenSSL 1.0.2p  14 Aug 2018
built on: reproducible build, date unspecified
options:bn(64,64) rc4(ptr,int) des(idx,cisc,16,int) aes(partial) idea(int) blowfish(idx)
compiler: clang -I. -I.. -I../include  -fPIC -fno-common -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -arch x86_64 -O3 -DL_ENDIAN -Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM
The 'numbers' are in 1000s of bytes per second processed.
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
aes-128-cfb     847216.79k   850770.86k   853712.05k   859912.39k   854565.80k

The encryption performance in kcptun is as fast as in openssl library(if not faster).

Quantum Resistance

Quantum Resistance, also known as quantum-secure, post-quantum, or quantum-safe cryptography, refers to cryptographic algorithms that can withstand potential code-breaking attempts by quantum computer. In kcptun, after v20240701, it adapts QPP based on Kuang's Quantum Permutation Pad for quantum-resistent communication.

To enable QPP in kcptun, you need to set:

   --QPP                enable Quantum Permutation Pads(QPP)
   --QPPCount value     the prime number of pads to use for QPP: The more pads you use, the more secure the encryption. Each pad requires 256 bytes. (default: 61)

Your could also specify

     "qpp":true,
     "qpp-count":61,

in your client and server side json file. These 2 parameters must be identical on both sides.

To achieve Effective Quantum-Resistance,, specify at least 211 bytes in the -key parameter and ensure -QPPCount is no less than 7.
Make sure -QPPCount is COPRIME（互素） to 8(or simply set to a PRIME number) like: 101, 103, 107, 109, 113, 127, 131, 137, 139, 149, 151, 157, 163, 167, 173, 179, 181, 191, 193, 197, 199...

Memory Control

Routers, mobile devices are susceptible to memory consumption; by setting GOGC environment(eg: GOGC=20) will make the garbage collector to recycle faster. Reference: https://blog.golang.org/go15gc

Primary memory allocation are done from a global buffer pool xmit.Buf, in kcp-go, when we need to allocate some bytes, we can get from that pool, and a fixed-capacity 1500 bytes(mtuLimit) will be returned, the rx queue, tx queue and fec queue all receive bytes from there, and they will return the bytes to the pool after using to prevent unnecessary zer0ing of bytes. The pool mechanism maintained a high watermark for slice objects, these in-flight objects from the pool will survive from the periodical garbage collection, meanwhile the pool kept the ability to return the memory to runtime if in idle, -sndwnd,-rcvwnd,-ds, -ps, these parameters affect this high watermark, the larger the value, the bigger the memory consumption will be.

-smuxbuf also affects the maximum memory consumption, this parameter maintains a subtle balance between concurrency and resource, you can increase this value(default 4MB) to boost concurrency if you have many clients to serve and you get a powerful server at the same time, and also you can decrease this value to serve only 1 or 2 clients and hope this program can run under some embedded SoC system with limited memory and only you can access. (Notice that the -smuxbuf value is not proportional to concurrency, you need to test.)

Compression

kcptun has builtin snappy algorithms for compressing streams:

Snappy is a compression/decompression library. It does not aim for maximum compression, or compatibility with any other compression library; instead, it aims for very high speeds and reasonable compression. For instance, compared to the fastest mode of zlib, Snappy is an order of magnitude faster for most inputs, but the resulting compressed files are anywhere from 20% to 100% bigger.

Reference: http://google.github.io/snappy/

Compression may save bandwidth for PLAINTEXT data, it's quite useful for specific scenarios as cross-datacenter replications, by compressing the redologs in dbms or kafka-like message queues and then transfer the data streams across the continent can be much faster.

Compression is enabled by default, you can disable it by setting -nocomp on BOTH KCP Client & KCP Server MUST be IDENTICAL.

SNMP

type Snmp struct {
    BytesSent        uint64 // bytes sent from upper level
    BytesReceived    uint64 // bytes received to upper level
    MaxConn          uint64 // max number of connections ever reached
    ActiveOpens      uint64 // accumulated active open connections
    PassiveOpens     uint64 // accumulated passive open connections
    CurrEstab        uint64 // current number of established connections
    InErrs           uint64 // UDP read errors reported from net.PacketConn
    InCsumErrors     uint64 // checksum errors from CRC32
    KCPInErrors      uint64 // packet input errors reported from KCP
    InPkts           uint64 // incoming packets count
    OutPkts          uint64 // outgoing packets count
    InSegs           uint64 // incoming KCP segments
    OutSegs          uint64 // outgoing KCP segments
    InBytes          uint64 // UDP bytes received
    OutBytes         uint64 // UDP bytes sent
    RetransSegs      uint64 // accumulated retransmitted segments
    FastRetransSegs  uint64 // accumulated fast retransmitted segments
    EarlyRetransSegs uint64 // accumulated early retransmitted segments
    LostSegs         uint64 // number of segs inferred as lost
    RepeatSegs       uint64 // number of segs duplicated
    FECRecovered     uint64 // correct packets recovered from FEC
    FECErrs          uint64 // incorrect packets recovered from FEC
    FECParityShards  uint64 // FEC segments received
    FECShortShards   uint64 // number of data shards that's not enough for recovery
}

Sending a SIGUSR1 signal to KCP Client or KCP Server will dump SNMP information to console, just like /proc/net/snmp. You can use this information to do fine-grained tuning.

Manual Control

https://github.com/skywind3000/kcp/blob/master/README.en.md#protocol-configuration

-mode manual -nodelay 1 -interval 20 -resend 2 -nc 1

Low-level KCP configuration can be altered by using manual mode like above, make sure you really UNDERSTAND what these means before doing ANY manual settings.

Identical parameters

These parameters MUST be IDENTICAL on BOTH side:

-key
-crypt
-nocomp
-smuxver

References

https://github.com/skywind3000/kcp -- KCP - A Fast and Reliable ARQ Protocol.
https://github.com/xtaci/kcp-go/ -- A Production-Grade Reliable-UDP Library for golang
https://github.com/klauspost/reedsolomon -- Reed-Solomon Erasure Coding in Go.
https://en.wikipedia.org/wiki/Differentiated_services -- DSCP.
http://google.github.io/snappy/ -- A fast compressor/decompressor.
https://www.backblaze.com/blog/reed-solomon/ -- Reed-Solomon Explained.
http://www.qualcomm.cn/products/raptorq -- RaptorQ Forward Error Correction Scheme for Object Delivery.
https://en.wikipedia.org/wiki/PBKDF2 -- Key stretching.
http://blog.appcanary.com/2016/encrypt-or-compress.html -- Should you encrypt or compress first?
https://github.com/hashicorp/yamux -- Connection multiplexing library.
https://tools.ietf.org/html/rfc6937 -- Proportional Rate Reduction for TCP.
https://tools.ietf.org/html/rfc5827 -- Early Retransmit for TCP and Stream Control Transmission Protocol (SCTP).
http://http2.github.io/ -- What is HTTP/2?
http://www.lartc.org/ -- Linux Advanced Routing & Traffic Control
https://en.wikipedia.org/wiki/Noisy-channel_coding_theorem -- Noisy channel coding theorem
https://zhuanlan.zhihu.com/p/53849089 -- kcptun开发小记

（注意：我没有任何社交网站的账号，请小心骗子。）

Name		Name	Last commit message	Last commit date
Latest commit History 555 Commits
.github		.github
assets		assets
client		client
dist		dist
server		server
std		std
vendor		vendor
.gitignore		.gitignore
.travis.yml		.travis.yml
Dockerfile		Dockerfile
LICENSE.md		LICENSE.md
README.md		README.md
build-release-cgo.sh		build-release-cgo.sh
build-release.sh		build-release.sh
download.sh		download.sh
go.mod		go.mod
go.sum		go.sum

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Requirements

QuickStart

Build from source

Performance

Basic Tuning Guide

Improving Throughput

Improving Latency

Head-of-Line Blocking (HOLB)

Slow Devices

Expert Tuning Guide

Overview

Usage

Multiport Dialer

Forward Error Correction

DSCP

Cryptoanalysis

Quantum Resistance

Memory Control

Compression

SNMP

Manual Control

Identical parameters

References

About

Releases 108

Contributors 22

Languages

License

xtaci/kcptun

Folders and files

Latest commit

History

Repository files navigation

Requirements

QuickStart

Build from source

Performance

Basic Tuning Guide

Improving Throughput

Improving Latency

Head-of-Line Blocking (HOLB)

Slow Devices

Expert Tuning Guide

Overview

Usage

Multiport Dialer

Forward Error Correction

DSCP

Cryptoanalysis

Quantum Resistance

Memory Control

Compression

SNMP

Manual Control

Identical parameters

References

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 108

Contributors 22

Languages