This project is not maintained anymore (I no more use Gigaset Element devices)

If you are using HomeAssistant, you can check https://github.com/dynasticorpheus/gigasetelements-ha as a replacement

gigaset-elements-proxy v2.2.7

Is a very simple gateway to gigaset-elements API:

• periodic re-authentication
• local proxy to the gigaset-elements APIs
• gigaset-elements events are periodically fetched and pushed to a MQTT broker

As gigaset-elements does not provide local network APIs, I use it to access my equipement from https://home-assistant.io

raw Gigaset APIs

These are the API that are published on Gigaset Cloud, gigaset-elements-proxy only re-expose them locally without authentication. Note that if you're reading this page on github, theses links does not work: you have to install the project.

• basestations

• events

  • ?limit=
  • ?group=
  • ?from_ts= &to_ts=

• cameras

  • /[id]/liveview/start
  • /[id]/recording/[status|start|stop]

• health

• notification settings

convenience APIs

These extra APIs are based on raw Gigaset APIs and apply light treatment in order to make them easier to use in a 3rd party application. Note that if you're reading this page on github, theses links does not work: you have to install the project.

• live camera (redirect to a cloud-based RTSP stream): you have to set the camera id in the configuration file

• live camera (local MJPEG stream): you have set your camera local infos in the configuration file

• all sensors status: online/offline and open/close/tilt status of all the sensors

• specific sensor status: online/offline and open/close/tilt status of one sensor

• intrusion settings: selected mode of the alarm system

• force refresh: send the actual status of the sensors and the alarm mode as mqtt events

MQTT events

• pushes event to queue gigaset/<sensor_friendly_name> with true or false payload
• motions events (movement detector and camera) automatically generate a delayed false event
• smoke detector test events automatically generate a delayed default event

gigaset sensor type	gigaset event type	mqtt topic	mqtt value
ds02 door sensor	open	gigaset/<sensor name>	true
ds02 door sensor	close	gigaset/<sensor name>	false
ws02 window sensor	open	gigaset/<sensor name>	true
ws02 window sensor	tilt	gigaset/<sensor name>	true
ws02 window sensor	close	gigaset/<sensor name>	false
ps02 motion sensor	movement	gigaset/<sensor name>	true
ps02 motion sensor	delayed after movement	gigaset/<sensor name>	false
ycam motion sensor	yc01.motion	gigaset/<sensor name>	true
ycam motion sensor	delayed after yc01.motion	gigaset/<sensor name>	false
sp01 siren	on	gigaset/<sensor name>	true
sp01 siren	off	gigaset/<sensor name>	false
sd01 smoke detector	smoke_detected	gigaset/<sensor name>	alarm
sd01 smoke detector	test	gigaset/<sensor name>	test
sd01 smoke detector	delayed after test	gigaset/<sensor name>	default
sd01 smoke detector	smoke_no_longer_detected	gigaset/<sensor name>	default
sd01 smoke detector	end_sd01_smoke_detected	gigaset/<sensor name>	default
sd01 smoke detector	end_sd01_test	ignored
um01 universal sensor	open	gigaset/<sensor name>	true
um01 universal sensor	tilt	gigaset/<sensor name>	true
um01 universal sensor	close	gigaset/<sensor name>	false
basestation: alarm mode changed	isl01.bs01.intrusion_mode_loaded	gigaset/<base name>	<new alarm mode>
any sensor	battery_critical	gigaset/<sensor name>_battery	battery_critical
allow_unknown_events is true	any other event	gigaset/<sensor name>	<gigaset event type>

installation

option 1 - as a Hassio addon

point to this custom repository

https://github.com/ycardon/hassio-addons

option 2 - from git

• (recommended if you have to customize the application to your needs)
• nodejs is required

> git clone https://github.com/ycardon/gigaset-elements-proxy
> cd gigaset-elements-proxy
> npm install
> vim config/default.yaml
> node app.js

option 3 - from npm

install
> [sudo] npm install gigaset-elements-proxy -g

locate then edit config/default.yaml with
> npm list gigaset-elements-proxy

run
> ge-proxy

then

Have a look on the examples directory for instructions on creating a service or configure the sensors inside home-assistant

You can get extra help on this home-assistant community topic or in the issue section

You can also check https://github.com/lorenwest/node-config/wiki/Configuration-Files

restrictions

• only read events and states from the Gigaset Cloud API, no writes (eg. cannot change the status of the alarm system)
• track ds02 (door sensors) ws02(window sensors) and yc01 / ps02(movement and camera movement sensors) event types
• since v1.4, track sp01 (siren command event)
• since v1.5, track sd01 (smoke detector event)

improvements

v1.3.2 Halloween (1 november 2018)

• when the server starts, send the actual status of the sensors and the alarm mode
• added the /force-refresh API to send again the actual status of the sensors and the alarm mode
• added examples directory
• added ws02 window sensors type
• added /intrusion_settings API to monitor selected alarm mode
• added handling of basestation events (selected alarm mode)
• added more options to configue MQTT broker connections
• fixed CVE in dependency
• logging server version

v1.3.5 Armistice (11 november 2018)

• logging mqtt connection errors
• basestation event now returns the mode of the alarm mode instead of true for home

v1.4.6 Happy new year (24 february 2019)

• fire an mqtt event when an alarm is trigered (true) or acknowledged (false)
• better handling of parsing errors when gigaset API returns unexpected message (try to re-authorize)
• added sensor type in the /sensors API

v1.5.5 Spring (5 april 2019)

• added sd01 smoke detector sensors
• added a new configuration parameter to allow or not the propagation of unknown gigaset events
• added low battery in the form of topic: gigaset/<sensor name>_battery value: low_battery
• added an gigaset events to MQTT events table in the documentation (thanks to @sracing)

v2.0.0 Typescript (11 april 2019)

• heavy code reorganization (moved to typescript, introduced modules)
• no functionnality added

v2.1.5 Labour Day (1 may 2019)

• added a new API: sensors/<sensor-friendly-name> to ease treatment from home-assistant
• now return initial state of smoke detectors (cf. this issue)
• API sensors/ no longer returns a array of objects but a plain object indexed with the sensor's friendly name
• now using a proper build system for the project
• filtering out the Philips Hue devices in the sensors/ API

v2.2.0 Hassio (24 sept 2019)

• can now be installed as an Hassio Addon
• breaking change REST API port is now 8094 (and not 3000 as it used to be), can be changed in config/default.yaml

v2.2.1 Universal (18 oct 2019)

• added um01 universal sensor

v2.2.6 Confinement (14 avril 2020)

• merged @ginkel fix for intrusion events: now using basestation id instead of friendly name (no more present in the event), discussion here

credits

• Strongly inspired by the Python command line version that can be find under https://github.com/dynasticorpheus/gigaset-elements (thank you !!)
• Security audits
  • https://www.iot-tests.org/2017/01/testing-gigaset-elements-camera/
  • https://team-sik.org/sik-2016-044/
  • https://team-sik.org/sik-2016-045/
  • https://team-sik.org/sik-2016-046/
  • https://team-sik.org/sik-2016-047/
  • https://team-sik.org/sik-2016-048/
• Thank you to @h4nc, @dotvav, @sracing and @ginkel for their comments, suggestions, testing and code improvement

building the project

• run

    > git clone https://github.com/ycardon/gigaset-elements-proxy
    > npm install

• code new stuff
• update version in ./package.json
• run either

    > npm run build
    > npm run dev
    > npm publish