Install pipenv
pip install pipenv
We use pipenv, the requierements are included in Pipfile for the test
For example, to execute the receive password test:
pipenv install
pipenv run python testlocal.py
To receive a password:
from nomorepass.core import NoMorePass
import qrcode
nmp = NoMorePass()
qrtext = nmp.getQrText ('misitio')
#Show qr
img = qrcode.make(qrtext)
img.show()
#Wait for password
res = nmp.start()
if ('error' in res):
print "Error: "+res["error"]
else:
#Pass received
print "Usuario: "+res["user"]
print "Password: "+res["password"]
print "Extra: "+res["extra"]To send a password:
from nomorepass.core import NoMorePass
import qrcode
user = 'the user you want to send'
password = 'te password you want to send'
site = 'the site for the password'
nmp = NoMorePass()
qrtext = nmp.getQrSend(site,user,password,{'type':'pwd'})
#Show the qr
img = qrcode.make(qrtext)
img.show()
#wait for app receive the pass
res = nmp.send()
if ('error' in res):
print "Error: "+res["error"]
else:
#password sent
print "Password received"
print "Please, close the qr window"The local example display a qr-code and waits to scan it with nomorepass app, then it shows by console the data received (using secure nomorepass-protocol2). The window containing the qr is not closed by the program, you should close manually.
This example generates a unique Qr to send a password securely to a phone (one time use and using protocol2)
Send password to app
positional arguments:
site site identification
optional arguments:
-h, --help show this help message and exit
--user USER username to send
--password PASSWORD password to send
The complete example is designed to work in a Raspberry pi with a TFT screen controlled by ST7735 attached. To install follow this instructions:
sudo apt-get update
sudo apt-get install build-essential python-dev python-smbus python-pip python-imaging python-numpy
For a Raspberry Pi make sure you have the RPi.GPIO and Adafruit GPIO libraries by executing:
sudo pip install RPi.GPIO
sudo pip install Adafruit_GPIO
Install the library by downloading with the download link on the right, unzipping the archive, navigating inside the library's directory and executing:
sudo python setup.py install
- Connect Raspberry pi to display (see pinout):
TFT -- RASPBERRY
------------------
LED -- 3.3v (or other pin to switch on/off screen)
SCK -- SCLK
SDA -- MOSI
A0 -- GPIO24
RESET -- GPIO25
CS -- CE0
GND -- GND
VCC -- 3.3v
Attach an additional push button between pin GPIO27 (and GND)
Use pin GPIO17 and GPIO18 as output
Run the test
python test.py
(C) 2021 Jose Antonio Espinosa https://nomorepass.com