TerrainControl

This guide is for PlotSquared versions <= 1.12.2

For partial plot areas, see Here

Using the /plot area command.

• /plot area create ＜world＞ type=1 terrain=? ＜modifiers＞
• /plot confirm

Modifiers (optional):

• type (0 = standard plotworld (new world), 1 = augmented full (new world), 2 = augmented partial)
• terrain (0 = flat, 1=flat + ores, 2=roads, 3=no change)
• size of the plot
• gap (road + border)
• main
• floor
• wall
• border
• height (height + 1 = y-coordinate for the border block)

You can regenerate the entire area using: /plot area regen (e.g. If you want to change the settings)

Alternatively use the setup command (mostly obsolete)

Step 1: Create a world

This will also work any existing world you have, e.g. Using the Terrain control generator: See: https://github.com/MCTCP/TerrainControl/wiki

Clusters

If you only want clusters, see the cluster tutorial: https://github.com/IntellectualCrafters/PlotSquared/wiki/Augmented-Plot-Worlds

Augmented:

• Use /plot setup
• Choose "Augmented" as the world type
• Complete the setup

Image